KitchenAid KI422BBONA User manual
KI422BBONA
Acessório para raspadinha
W11621205A.indb 1W11621205A.indb 1 9/16/2022 3:18:39 PM9/16/2022 3:18:39 PM
2
PARTS AND FEATURES
1Detachable Ice Cup
2Ice Cup Pusher
3Main Upper Housing
4Convenient Storage Box
5Fine Shave Blade
6Coarse Shave Blade
7Ice Cup Sleeve
8Plastic Ice Mold w/Lid (x4)
3
2
1
7
5 6
8
4
W11621205A.indb 2W11621205A.indb 2 9/16/2022 3:18:39 PM9/16/2022 3:18:39 PM
ENGLISH
3
PRODUCT SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions. Misuse of appliance may result in personal injury.
2. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience or
knowledge, unless they are closely supervised and instructed concerning use of
the appliance by a person responsible for their safety. Keep the appliance and its
cord out of reach of children.
3. Close supervision is necessary when any appliance is used by or near children.
Children should be supervised to ensure that they do not play with the appliance.
4. Never leave the appliance unattended while it is in operation.
5. Avoid contacting moving parts. Keep ngers out of discharge opening.
6. The use of accessories/attachments not recommended or sold by KitchenAid
may cause re, electric shock, or injury.
7. Do not use the appliance outdoors.
8. Turn the appliance off (OFF/0), unplug from outlet and detach the attachment
from appliance before cleaning and when not in use. Turn the appliance
off (OFF/0) and make sure the motor stops completely before putting on or
taking off parts.
9. Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
W11621205A.indb 3W11621205A.indb 3 9/16/2022 3:18:39 PM9/16/2022 3:18:39 PM
4
PRODUCT SAFETY
RESIDENCE MAINS:
The mains wires must be of copper with
a minimum cross-section per ABNT
(NBR-5410.)
To protect this appliance and the mains
against overloading, this appliance must be
connected to a circuit that is protected with a
thermomagnetic circuit breaker.
If the household circuit does not include a
circuit breaker, contact an electrician to have
one installed.
ELECTRIC OUTLET:
For your safety and to avoid damage to your
product, it is very important that your product
is earthed correctly.
Your appliance power cord features a
hexagon-shaped plug, 10A, per ABNT (NBR
14136).
Your residence electrical installation must have
a suitable electric outlet for this type of plug.
If not, it is your responsibility to have one
installed by a qualified electrician.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Use appropriate outlet type for your appliance
plug, as shown below:
Before operating this
appliance, make sure the
main voltage at
the installation site is the
same as indicated
on product technical data
label.
This information is also included on the label
attached to your appliance’s cord near the
plug.
IMPORTANT:
• If it is necessary to convert your 127V
appliance to 220V, use a 1.0 KVA
stabiliser.
• If it is necessary to convert your 220V
appliance to 127V, use a 1.0 KVA
stabiliser.
• Never plug your
appliance into
multiplug adapters
with another
appliance in the same
socket. Do not use an
extension cord. This
type of connection
may cause electrical overload in the
mains, and can damage the appliance
and could cause a fire. The appliance
should be plugged into its own outlet.
• In case of oscillation in mains voltage,
install an automatic voltage stabiliser
with minimum rating of 1500 Watts
between the appliance and the socket.
• If the cord of this appliance is damaged,
it must be replaced. Contact your
nearest authorised KitchenAid Customer
Care Centre.
ELECTRICAL REQUIREMENTS
10. Blades are sharp. Handle Carefully.
11. Also see the Important Safeguards section included in the Stand Mixer Use and
Care Guide.
SAVE THESE INSTRUCTIONS
W11621205A.indb 4W11621205A.indb 4 9/16/2022 3:18:39 PM9/16/2022 3:18:39 PM
ENGLISH
5
GETTING STARTED
The Shave Ice Attachment is compatible with all household KitchenAid Stand Mixers.
Set the Blades to Shave Ice as per requirement.
NAME ICON INTENDED USE SPEED
Coarse Shave
Blade
For coarser
ice shaving/ice chips. 10
Fine Shave
Blade
For a fine, fluffy,
snow-like ice shaving
texture. 10
Tempering Ice means allowing the ice to adjust at room temperature until it
develops a glossy, wet look and is clear from all sides. Tempering is an
important step for producing the lightest and fluffiest shave ice. Many factors
determine the amount of time it takes to temper. In most cases, your ice puck
should be ready to use in 10 minutes or less.
The Ice Molds are used for best performance for both coarse and fine shaving. It's easy to
get shave ice from tempered ice out of the molds.
TIP: For the fluffiest shave ice, we recommend tempering the ice puck for 10 minutes,
and then using the Fine Shaving Blade.
TEMPERING THE ICE PUCKS
NOTE: For detailed instructions on swapping blades, please see “CHANGING THE
BLADE” section.
NOTE: Ice pucks made with plain water require tempering. For mixed base recipes, refer
to the "Tips For Great Result" for tempering instructions.
PRODUCT USAGE
ICE PUCK PREPARATION
Fill the ice mold with water or flavored ice
base mixture of your choice.
NOTE: To keep the mold from
overflowing while freezing, be sure not to
fill past the fill line visible just below the
rim of the mold.
1
Affix the lid to the top of the mold and
place it in the freezer for 12 to 24 hours.
NOTE: Freezing time may vary and will
depend both on the temperature of your
freezer as well as the sugar or alcohol
content of your mixture.
2
NOTE: See “Tips for Great Results” sections for more details on Ice Puck Preparation.
W11621205A.indb 5W11621205A.indb 5 9/16/2022 3:18:40 PM9/16/2022 3:18:40 PM
6
PRODUCT USAGE
Turn the Stand Mixer OFF (0) and then
unplug.
3
For Stand Mixer with a hinged
attachment hub cover: Flip up to open.
For Stand Mixer with a removable
attachment hub cover: Turn the
attachment knob counterclockwise to
remove the attachment hub cover.
4
SET UP & ASSEMBLY - PREPARING TO MAKE SHAVE ICE
Before using your Shave Ice Attachment, clean it by following the detailed instructions in
“CARE & CLEANING” section.
After removing the ice molds from the
freezer, press firmly on the bottom and
sides to help release the puck from the
mold.
1
For Plain Ice recipes, allow ice to rest
for up to 10 minutes - this is called
“Tempering” and is recommended to
achieve ideal Shave Ice results.
2
W11621205A.indb 6W11621205A.indb 6 9/16/2022 3:18:40 PM9/16/2022 3:18:40 PM
ENGLISH
7
PRODUCT USAGE
Ensure that the upper lever of the
housing is rotated all the way to left. If
not, rotate it to the left until it clicks into
place. This will ready the attachment
for use and must be completed before
loading the Ice Puck into the Ice Cup and
attaching it to the housing.
7
Remove the Ice Cup from the housing
by rotating it to the right and pulling
downward. Take note of the small
indicator arrow which must line up with
the Lock and Unlock symbols on the
housing.
8
OPTIONAL: If you wish to change the
blade, grip the blade from the bottom
and rotate it to right to unlock and
remove.
Insert the Main Housing into the
attachment hub, make sure the power
shaft fits into the square hub socket. If
necessary, rotate the attachment back
and forth for proper fitment. The pin on
the attachment housing will fit into the
notch of the hub rim when in the proper
position.
5
Tighten the Stand Mixer attachment hub
knob clockwise until the attachment is
completely secured into the Stand Mixer.
6
W11621205A.indb 7W11621205A.indb 7 9/16/2022 3:18:41 PM9/16/2022 3:18:41 PM
8
Grip the blade from the bottom and slowly
insert it into the bottom of the Ice Cup
by aligning the interlocking tabs. Once
inserted, rotate the blade to the left until
you hear a "Click", to properly lock the
blade in place.
NOTE: Each of the interlocking tabs is
unique size, ensuring the blade can only be
installed in the correct position.
1
PRODUCT USAGE
Insert the Ice Cup Sleeve into the
Detachable Ice Cup, then insert a
prepared Ice Puck. Be sure to insert the
ice puck with the cross hatches facing
upward.
2
Attach the Detachable Ice Cup to the
bottom side of the main housing, rotating
it to the left to lock it in place.
NOTE: The small indicator arrow on the
Detachable Ice Cup that should line up
with the Lock and Unlock symbols on the
main housing.
3
Release the top lever by gently rotating it
to the right. The spring will engage as the
Ice Pusher clamps down on the ice puck.
The Shave Ice Attachment is properly
loaded and ready to use.
4
ASSEMBLY
W11621205A.indb 8W11621205A.indb 8 9/16/2022 3:18:41 PM9/16/2022 3:18:41 PM
ENGLISH
9
Once shaving is complete, turn off the
mixer and return the upper lever to the
leftmost locked position.
3
SHAVING ICE
Place a serving dish of your choice
beneath the Shave Ice Attachment. Do
this before starting the mixer.
1
Plug the Stand Mixer into a grounded
outlet Set the mixer to the highest speed
to begin shaving.
NOTE: For best results, consider rotating
the dish as the ice shaves to create a
more even, cone-shaped mound of ice.
2
PRODUCT USAGE
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W11621205A.indb 9W11621205A.indb 9 9/16/2022 3:18:41 PM9/16/2022 3:18:41 PM
10
Remove the Ice Cup from the housing
by rotating it to the right and pulling
downward. Discard any remaining ice.
4
Finish your Shave Ice dessert with a
variety of flavorings or toppings of your
choice.
5
See below for additional tips, tricks and
recipes to help make the most of your
Shave Ice experience.
For even more recipes and inspiration, visit
KitchenAid.com
PRODUCT USAGE
CHANGING THE BLADE
Grip the blade from the bottom and
rotate to the right to remove, or to the
left to install.
Once inserted, rotate the blade to the left
until you hear a "Click", to properly lock
the blade in place.
1
Each of the interlocking tabs is unique
size, ensuring the blade can only be
installed in the correct position.
2
W11621205A.indb 10W11621205A.indb 10 9/16/2022 3:18:42 PM9/16/2022 3:18:42 PM
Table of contents
Languages:
Other KitchenAid Kitchen Appliance manuals
KitchenAid
KitchenAid KMC4241 User manual
KitchenAid
KitchenAid 5KHB2571 User manual
KitchenAid
KitchenAid KHIP365510 User manual
KitchenAid
KitchenAid KHB3581 User manual
KitchenAid
KitchenAid K5-A Operating instructions
KitchenAid
KitchenAid 5FGA Quick guide
KitchenAid
KitchenAid 5KPEXTA Quick guide
KitchenAid
KitchenAid 5KSB13 Series User manual
KitchenAid
KitchenAid KSMVSA User manual
KitchenAid
KitchenAid 5KSMSIA User manual
KitchenAid
KitchenAid KPSA User manual
KitchenAid
KitchenAid 5KPM5 User manual
KitchenAid
KitchenAid KJG02A Series User manual
KitchenAid
KitchenAid KHB1231 User manual
KitchenAid
KitchenAid KSMMGA User manual
KitchenAid
KitchenAid 5KSM1JA User manual
KitchenAid
KitchenAid 5KSS1121 User manual
KitchenAid
KitchenAid KHB3581 Assembly instructions
KitchenAid
KitchenAid KSM2CB5B User manual
KitchenAid
KitchenAid KGM User manual
Popular Kitchen Appliance manuals by other brands
Tayama
Tayama TYG-35AF instruction manual
AEG
AEG 43172V-MN user manual
REBER
REBER Professional 40 Use and maintenance
North American
North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions
Presto
Presto fountain popper instruction manual
Westmark
Westmark 1035 2260 operating instructions
