H.Koenig Oly900 User manual

oly900

Oil press

Presse à huile

Ölpress

Oliepress

Prensa de aceite

Pressa per olio

ENGLISH

Please read carefully this user manual and all the safety precautions

before using the product.

SAFETY INSTRUCTIONS

• When using electrical appliances, basic safety precautions should

be observed, including the following:

• Make sure that your output voltage corresponds to the voltage

stated on the rating label of the appliance.

• If the appliance orits power cord has been damaged, it must be

repaired or replaced by the manufacturer, a service technician, or a

similarly qualified person, to prevent hazards.

• Before cleaning the appliance, be sure that it has cooled completely

and that it is unplugged from the outlet.

• To protect yourself from electric shock, do not immerse the power

cord, plug, or appliance in water or other liquids.

• Misuse of this appliance may result in severe personal injury.

• Always unplug the unit prior to assembly, after use, before cleaning,

and in the event of any malfunction.

• Always unplug the unit before opening the bean or collection

container and before removing either from the housing.

• This appliance may be used by persons with reduced physical,

sensory or mental capabilities or lack of experience or knowledge,

provided that they are supervised or instructed in the safe use of the

appliance and that they fully understand the potential hazards.

• Before each use, check the appliance, its power cord, and its

attachments for any defects. If the appliance has been dropped or if

excessive force has been used to pull the power cord or plug, then

the appliance should not be used because even invisible damage

may have adverse effects on the operational safety of the appliance.

• The appliance and its cord must never be placed near or on top of

hot surfaces such as a radiator, ovens, gas burners, open flames,

etc.

• When unplugging the unit, always grip the plug itself. Do not jerk or

pull the power cord.

• Do not allow the cord to hang over the edge of the counter or table.

• This appliance may be used by children of at least 8 years of age,

as long as they are supervised and have been given instructions

about using the appliance safely and are fully aware of the dangers

involved.

• Cleaning and maintenance should not be carried out by children

unless they are at least 8 years of age and are supervised by an

adult.

• Keep the appliance and its power cord out of reach of children

under 8 years of age.

• When using electrical equipment, safety precautions must always

be taken to prevent the risk of fire, electric shock and/or injury in the

event of misuse.

• Make sure that the voltage rating on the typeplate corresponds to

your main voltage of your installation. If this is not the case, contact

the dealer and do not connect the unit

• Please keep this document at hand and give it to the future owner

in case of transfer of your device

• Never leave the unit unattended while in operation.

• The device must not be used if it has been dropped, it obvious signs

of damage are visible or if it has leaks.

• This appliance is intended for use in domestic and similar

applications such as :

- kitchen areas in shops, offices and other working environments

- farmhouses

- in hotels, motels and other residential environments

- guest rooms.

* Please do not use the machine for other purposes outside of its

original function.

KEE P AWAY FROM WATER

KEE P AWAY FROM FIRE

KEE P OUT OF REACH OF

CHILDREN

DO NOT DISSASEMBLE

DO NOT INSERT BODY PARTS

THE DEVICE

WHEN IT’S HOT, DO NOT

TOUCH MOVING PARTS

WHEN OPERATING

DO NOT POUR LIQUID INTO

THE HOPPER

DO NOT TOUCH THE OIL

COLLECTOR WHEN

OPERATING

NOTE:

Do not try to change parts

or the power

The machine is designed to

process sunflower seeds,

pumpkin seeds, flaxseed,

sesame, rapeseed, peanuts,

walnuts, etc. Donot try to

process anything else but the

seeds and nuts we advise you

to! Consult the list of

processable items in this user

manual.

GENERAL DESCRIPTION

TECHNICAL SPECIFICATIONS

SWITCHING CONTROL: ON / OFF

DIMENSIONS: 355 * 178 * 264 mm

THERMAL CONTROL: Temperature probe + Thermal protection

MOTOR POWER: 180 W

HEATING MODE: Heating element and extrusion shaft

HEATING POWER: 330 W

OUTPUT POWER: 510 W

VOLTAGE RATING: 220-240V~/50-60 HZ

WEIGHT: 6,8 KG

ACCEPTED SEEDS

Brown flax seeds

Mustard seeds

Chia seeds

Cashews nuts

Peanuts

Hazelnuts

Raw coconut

Almonds

Pistachios

Hemp seeds

Grape seeds

Sunflower seeds

Macadamia nuts

Walnuts

Rapeseed

Brazil nuts

Pine nuts

Pumpkin seeds

Poppy seeds

Sesame seeds

Pecans

Argan seeds

Coriander seeds

We advise you to dry/dehydrate your seeds before use.

WARNING : This oil press does not allow the extraction of

olive oil.

HOW TO USE THE OIL PRESS MACHINE

1. Rotate to open

the hopper

lid.

2. Put the ingredients in the hopper.

Note : Please use clean and high oil content ingredients

(dried). If they contain stones, sand or metal, this could

damage inner parts. Ingredients larger than a peanut should

be cut into smaller pieces before being inserted.

3. Close the hopper lid and put

the oil box in the place.

Note : The hopper lid must be

in correct position otherwise the

machine won’t work.

4. Put the residue box

below the extrusion hole;

5. Connect to the power source

and press the Power button,

the selection screen will be lit.

6. Select the proper program, according to the

ingredient you are using.*

The oil pressing machine has 7 Presets as follows:

Peanuts, Sesame, Sunflower Seeds, Rapeseeds,

Flaxseeds, Walnut Core, Mixed. Select the proper program

for the ingredient you are using. If the seed or nut is not

listed, consult the matching table.

7. Press the Start/ Pause

button, the light will flash when

the machine starts to preheat.

8. Preheating will last for about

30 seconds - 1 minute,

depending on the program you

have selected, then, the

pressing operation will start.

9. The machine will

automatically stop after 1

minute and power off after

5 minutes if the hopper

has no ingredients inside.

You need to press the

Power button to start

squeezing again.

10. The machine will

automatically stop for cooling

down if it has been working for

more than 45 minutes. Then, it

won`t work for the next 30

minutes. However, if you need

to force starting it, you have to

pull

out the power plug for 10

seconds and connect it again to

work).

11. When the oil press jams, please press the Start/Pause button and the press Reverse for 5

seconds. The ingredients will be pushed into reverse, unjamming the oil pressing machine.

Press the Start/Pause

button to operate it again. Please keep in mind that if this happens 3 times, it will enter

protection mode and it will not work until stopped and powered again.

CLEANING AND MAINTENANCE

We recommend that you leave the machine to cool down a bit, after

it has been used, but still, the items have to be like warm, so this will

ease your job, the residues will not stick to the metal parts.

Remove the protection cover.

Unscrew the extrusion shaft with the special spanner included in the

box, in a counterclockwise direction and then take out the outer part.

Clean the extrusion shaft and its outer element with a soft towel or

cloth. Corrosive detergent should not be used.

Clean the outer element with the brush and make sure there is no

residue inside.

Leakage prevention board

Fix the extrusion shaft and then the outer element when you

assemble the machine.

TROUBLESHOOTING

NO.

PROBLEM:

SOLUTIONS:

Screw extrusion shaft got

stuck

A: Press the “reverse” button for 5 seconds and the

extrusion shaft will reverse back the ingredients. Then

press “Start/Pause” button.

B: Turn off and pull out the plug. Disassemble the out

element and extrusion shaft, clean the items as well as

the hopper and its entrance. Assemble it back!

Motor stops rotating and

doesn’t squeeze oil

A: It is normal for the motor to take 30-45 seconds to

preheat the extrusion shaft before it starts squeezing.

B: Check if the hopper lid or oil box are in the correct

position.

The motor stops without

any notice while the

machine is working

A: If it has been working for more than 45 minutes, it is

normal that it enters self protection mode.

B: If more than a minute has passed from the last

processed ingredient, it is normal the oil presing

machine has stopped.

C: If the oil pressing machine has stopped 3 times,

because being jammed, it will enter as well, in self

protection mode.

TIPS & TRICKS

To make high quality oil and avoid the machine getting stuck or parts damaging, please select good

quality ingredients, with high oil content, without stones or sand otherwise it will damage parts or stuck

the machine.

Use ingredients with high oil content, avoid ingredients that are rotten, oxidized or have low oil content.

Soybean is not a proper ingredient, please avoid it!

Special tip for peanuts: we suggest you fry the peanuts before pressing them. Fry them at 80

centigrades but don’t over fry them because the beans could get burn.

The oil extraction rate is very good if the ingredients are dry up to 90%. For better results, we

reccomend you to dry the ingredients for about 1 hour under the sun or in a dehydrator at 60

centigrades.

It is necessary to clean the extrusion shaft with a clean and soft cloth or towel after every use. Try not

to use water, don`t use detergent!

Depending on the type of ingredient you are using, it processes around 100-150 g of ingredients every

5 minutes.

The efficiency of the squeezing process is between 30-75 %, depending on ingredients, for instance,

out of 100 g of walnuts, you can squeeze about 75 ml of oil, out of 100 g of flaxseed you get around 45

ml of oil.

Freshly squeezed oil is not clear, it has sediments, after a while, if it is not stirred, the sediment settles.

Anyway, the oil is cold pressed, it does not oxidize, it is a natural source of proteins, vitamins and fatty

acids.

The residue can be used for preparing food or as a sauce material.

Table of contents

Languages:

Other H.Koenig Kitchen Appliance manuals

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions

H.Koenig oly900 User manual

Popular Kitchen Appliance manuals by other brands