English instruction manual
5
WEIGHTING STEP
Under the state press the key of “ON/OFF” to power on, the scale will be zero “0.00” appear on the display
aer 3 seconds.
Under the weight state, put the container on the bowl, LCD will show the weight of container.
Press the key of “TARE”, LCD shows zero. Clear the weight of the container, then put the food into bowl, the
weight will appear on the display. Press the key of “ON/OFF” again , power o.
ERROR DISPLAY INTRODUCTION
When the scale is over loaded, the “EEEE” will appear on the display.
When the screen shows “ LO ”, it means that the power isn’t enough, please change the baeries as soon
as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERY
Use 2PCS CR2032 baeries.
When change the baery, please open the baery cover on the back, put the baery in the baery case
(make the positive poles towards), then close the baery cover tight.
ADVICE FOR USE AND CARE
Put the scale on a clean and at table. e max. weight of the scale is 5000g, which included the weight
before tare. To ensure the life of the scale, do not put the scale under wet, hot & cold condition.
e product belongs to high precision electronic weighing apparatus, please do not press or drop the scale
otherwise the scale is easy to damage. If the scale surface is dirty, please clean the scale with so cloth, do
not use any chemical detergent and allow water to get inside the scale.
e product is for small goods weighing only, do not use for legal trade. If the result appears improperly,
please check about whether the baeries and the touching point contact well. Replace for new baeries
if used for a long time already, then try again. If necessary, contact the local franchisers or telephone com-
pany.
