Sunbeam 32610081 User manual

Handheld Steamer

www.sunbeamhome.com

MODEL: 32610081

ITEM: 12905

Owner’s Guide

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always

be followed including the following:

1. READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

2. Use appliance only for its intended use.

3. To reduce the risk of electric shock, do not immerse the appliance in

water or other liquids.

4. Do not allow cord to touch hot surfaces. Let appliance cool completely

before putting away. Loop cord loosely around appliance when storing.

5. Always disconnect appliance from electrical outlet when ﬁlling with water

or emptying, and when not in use.

6. Do not operate appliance with a damaged cord, or if the appliance has

been dropped or damaged. To reduce the risk of electric shock, do not

disassemble or attempt to repair the appliance, contact customer service.

Incorrect reassembly or repair could cause a risk of ﬁre, electric shock, or

injury to persons when the appliance is used.

7. Burns could occur from touching hot metal parts, hot water, or steam.

Use care when you turn a steam appliance upside down – there may be

hot water in the reservoir.

8. To reduce the risk of contact with hot water emitting from steam vents,

check appliance before each use by holding it away from body and

operating steam button.

9. To reduce the likelihood of circuit overload, do not operate another high

wattage appliance on the same circuit.

10. Never steam clothes while someone is wearing.

11. If an extension cord is absolutely necessary, a 15 ampere rated cord

should be used. Cords rated for less amperage may overheat. Care

should be taken to arrange the cord so that the cord cannot be pulled or

tripped over.

SAVE THESE INSTRUCTIONS

Thank you for purchasing the Sunbeam®Handheld Travel Steamer with

powerful continuous steam technology. This Steamer will bring out the best

in garments, linens, drapes and more—quickly and efﬁciently!

12. When ﬁlling the water reservoir, watch for water that can drip onto the

ﬂoor and cause you to slip and fall.

13. Care should be taken to arrange the cord so that it cannot be pulled

or tripped over. Always make sure you can move freely without getting

tangled with the cord.

14. Appliance may cause personal injury or be damaged if dropped.

15. The use of attachments not recommended or sold by the appliance

manufacturer may cause injuries or void your warranty.

16. To avoid personal injury and damage to the appliance, only add water to

the water reservoir. NEVER add cleaning solutions, perfumes, oils or any

other chemical additives.

17. To reduce the risk of electrical shock, this appliance has a polarized plug

(one blade is wider than the other). This plug ﬁts a polarized outlet only

one way; if the plug does not ﬁt fully into the outlet, reverse the plug.

If it still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to

defeat this safety feature.

18. When using the steamer for the ﬁrst time, please check if voltage marked

on rating label matches the voltage in your home.

BEFORE FIRST USE

• Unpack your Steamer; remove and peel off any labels adhered to the

unit.

• Remove and save instruction manual.

• Wipe outside of the unit with a damp cloth or sponge to remove any

dust. Dry thoroughly.

• Keep unit on a ﬂat, level surface.

• When using your Steamer for the ﬁrst time, you may notice a small

amount of smoke and a slight odor. This is normal when heating the

appliance for the ﬁrst time and there is no reason for concern.

IMPORTANT SAFEGUARDS CONT.

LEARNING ABOUT YOUR SUNBEAM®

VARIABLE TEMPERATURE HANDHELD STEAMER

1. Steam Plate

2. Steam Button

3. Handle

4. Voltage Selector Switch

5. Bristle Brush

6. Temperature Ready Light

7. Water Reservoir

8. Variable Steam Button

9. Power Cord

OPERATING INSTRUCTIONS

FILLING WATER RESERVOIR

Warning: To avoid personal injury and damage to the unit, only add water

to the water reservoir. NEVER add cleaning solutions, perfumes, oils or any

other chemical additives.

Note: Your Steamer is designed to be used with tap water. However, if you

have hard water, we recommend using distilled water for better results.

1. Place Steamer on a ﬂat surface.

2. Gently Pull the Water Resevoir in lateral direction using your hand

(Figure 1).

3. Take the water reservoir to a sink. Pull the rubberized water-ﬁll cover

to open and pour tap water from the faucet into the water-ﬁll opening

until it reaches the Max water level in water reservoir (Figure 2). If water

spills outside of the reservoir, or within the center water reservoir cavity,

wipe it dry with a paper towel or cloth.

Warning: When ﬁlling the water reservoir, watch for water that can

drip onto the ﬂoor and cause you to slip and fall.

(Figure 1)

(Figure 2)

Tip: It is not necessary to have a full reservoir of water for the Steamer

to generate steam. For best results, just make sure the water reservoir is

at least half full.

4. Close the water-ﬁll cover and reﬁt the water reservoir into the stand.

Pull on the reservoir to ensure it is fully locked in position.

Note: If you need to add water while steaming, unplug the steamer,

wait until it cools and follow the above steps. If a cloud vibrating noise

is heard, then the water level is low and needs to be reﬁlled.

USING YOUR STEAMER VERTICALLY

You can use your Steamer in the vertical position to press with steam

hanging garments and drapes.

1. Filled the water reservoir with water. Ensure that there is sufﬁcient water

in the water reservoir.

2. Hang your garment to be steamed on a clean hanger.

3. Turn Voltage Selector Switch button to correct voltage based on the

country you are located in, and insert plug into the outlet with speciﬁed

voltage. Power indicator light will turn blue.

Warning: Incorrect voltage protection feature: if the voltage selected is

not the same as the outlet voltage, the steamer will not heat. The indicator

light with ﬂicker red & blue alternately. To reset the steamer, unplug the

power cord from the outlet & select the correct voltage then insert the plug

into the outlet.

4. Plug the steamer into a standard electrical outlet and then turn on the

power, the indicator light will turn blue and ﬂashes, then the device

enters the preheating stage. The product is not yet usable at this time.

When the indicator light ﬂashes and stops, it indicates that the device

has completed preheating (preheating time is about 20 seconds). Press

the steam button twice for a burst of steam. Hold the steam button for

3 seconds for continuous steam for 3 minutes.

Warning: Care should be taken to arrange the cord so that it cannot

be pulled or tripped over. Always make sure you can move freely

without getting tangled with the cord.

Caution: Burns could occur from touching hot parts, hot water, or

steam. Use care when you turn a steam appliance upside down – there

may be hot water in the reservoir.

5. With your free hand, pull the fabric tight and press the steam button as

you move the Steamer over the fabric. Touch the fabric lightly with the

non-stick panel, moving it in a downward motion, beginning at the top

of the garment and moving downward. Repeat until fabric is wrinkle-free.

Warning: Steam is hot. Always point steamer exit away from yourself,

other persons, pets, plants and walls. Never steam clothes while they

are being worn.

6. For turbo mode (higher volume of steam), press the Variable Steam

button. The indicator light will change to red when in turbo mode.

7. When ﬁnished, press the Steam button.

8. Place Steamer on a ﬂat surface and unplug from electrical outlet.

9. Wait until Steamer has cooled and empty water reservoir.

Note: Always unplug the Steamer when not in use.

AUTO-OFF FEATURE

If there is no operation for 8 minutes the appliance will turn to auto-off

mode and turn off the power. Switching any button in the following 15

minutes will turn the steamer back to the preheating mode. If there is no

operation following the 15 minutes, the steamer will cut off all power and

the power cord will need to be reinserted to turn on the steamer.

ASSEMBLING THE BRISTLE BRUSH ATTACHMENT

1. Place the hook on the bristle brush onto the groove of the upper

cover of the product. Press the tail of the bristle brush tightly towards

the body. When the sound of the buckle is heard, the bristle brush is

installed in place. (When assembling brush, please make sure the steam

plate is cold).

2. The bristle brush can improve steam penetration and quickly achieve

better steaming effects on heavy clothing such as jackets. Use the brush

with steam by pressing the steam switch and slowly moving the bristle

along the clothing.

Warning: before installing or disassembling the bristle brush, be sure

to unplug the power plug of the steamer, the steam plate may still be

hot.

STEAMING TIPS

• Improper use of the Steamer can cause property damage due to the

steam. Always read the instructions in this manual before using your

Steamer.

• Do not operate the Steamer with an empty water reservoir. To add water

during operation, turn steamer off, wait for it to cool down then remove

water reservoir and reﬁll.

• Always read the fabric care labels to help determine fabric type to be

steamed. If unsure of fabric’s ﬁber, test a small hidden area, such as an

inside seam or hem, before steaming.

• For more difﬁcult wrinkles, try steaming from the underside of the fabric.

• When steaming, touching fabric lightly with the steam nozzle can help in

wrinkle removal. It is important to make contact with the garment and/or

fabric.

• Heavier fabrics require more steam.

• Only use water in the unit. Do not add cleaning solutions, scented

perfumes, oils or any other chemicals to the water that can cause

damage to the appliance.

• Do not use steam directly against wall or doors.

• When hanging garment on a door while steaming, be careful not to

damage the door with steam.

• After use, empty water reservoir by turning it upside down to ensure all

water empties out and avoid leaks.

• When steaming, move the steamer continuously over the item being

pressed. Do not keep steamer over an area for any period of time to

avoid damage to the fabric.

CARE AND CLEANING

CLEANING

1. Make sure unit is off, unplugged and allow it to cool completely before

cleaning.

2. If there is water in the water reservoir, remove the reservoir and turn it

upside down to ensure all the water empties out.

3. Wipe exterior surfaces with a soft, damp cloth. Dry thoroughly.

Warning: Never immerse steamer, cord or plug in water or any other

liquid.

• Do not use abrasive cleaners or scouring pads that can scratch

the surface.

• Do not place in the dishwasher.

CLEANING WITH VINEGAR AND WATER

It is recommended to clean your Steamer every two months to reduce

mineral buildup that can affect the performance of your unit.

Warning: Do not use steel wool, abrasive cleaners, or corrosive liquids

(such as alcohol, gasoline, or acetone) to clean the product.

1. Turn off the unit and let it cool completely.

2. Remove water reservoir and make sure it is empty.

3. Fill water reservoir with a solution of 50% white vinegar and 50% water

up to the max level.

4. Plug unit into electrical outlet and press trigger to run a full steaming

cycle.

5. Once steaming is ﬁnished, ﬁll with clean water and repeat process until

the vinegar odor is eliminated.

STORAGE

Under Storage, store the unit in upright position, in a clean dry place with a

ﬂat, sturdy surface. Make sure the water reservoir is empty. If not, remove it

and turn it upside down to ensure all the water empties out and avoid leaks.

Store the product and all accessories in a cool, well-ventilated, and dry area.

Problem Possible Cause Solution

The steamer is not heating up. The steamer may not be plugged

in correctly, or the power may

not be turned on.

Ensure that the steamer is

properly plugged in and that the

power is turned on. Check if the

plug is inserted correctly and if

the outlet is working normally.

The steamer does not produce

any steam.

The steamer does not produce

any steam, the steamer has not

heated up sufﬁciently.

Steam button is not fully pressed

down

The water level in the water

reservoir is too low.

Electrical outlet is not working.

The water reservoir is not

properly placed.

Let the steamer preheat for 30

seconds before using. Wait until

the indicator light turns solid blue

and then press the power button.

Fully press down the steam

button for few seconds.

Unplug the steamer, let it cool

completely and reﬁll the water

reservoir.

Plug into another electrical

outlet.

Insert the water reservoir

properly.

The steamer makes a rattling

noise and vibrates.

The water pump inside the unit

detects the water level is low.

Unplug the unit, let it cool

completely and reﬁll water

reservoir.

The steamer leaves water drops

on the garment.

The accessory attachment being

used may have condensation.

Let the appliance cool

completely, remove attachment

and wipe dry.

The steamer is making a buzzing

noise while steaming / handle

shakes.

The water pump sends steam

to the steam panel to produce

steam.

This noise is normal.

If the indicator light is ﬂashing

back & forth between red & blue

Actual outlet voltage & the

voltage selected are not the same

The voltage switch must be set

to the same voltage as the outlet

voltage

TROUBLESHOOTING

This manual suits for next models

Table of contents

Other Sunbeam Kitchen Appliance manuals

Sunbeam

Sunbeam Hot Pot User manual

Sunbeam

Sunbeam CAFE PRESS GR8400 Operational manual

Sunbeam

Sunbeam ELECTRIC SKILLET CKSBSK160-033 User manual

Sunbeam

Sunbeam Urban Series User manual

Sunbeam

Sunbeam Metro Banquet FP7710 Operational manual

Sunbeam

Sunbeam DimpleTech MASTER SERIES User manual

Sunbeam

Sunbeam VersaCook MU2000 X5 Operational manual

Sunbeam

Sunbeam Pie Magic PM4210 User manual

Sunbeam

Sunbeam BREKKY AND BANQUET User manual

Sunbeam

Sunbeam Choccy CF4100 User manual

Sunbeam

Sunbeam Cornelius CP4500 Operational manual

Sunbeam

Sunbeam Slurples SL4600 User manual

Sunbeam

Sunbeam MultiMincer FG5600 Service manual

Sunbeam

Sunbeam JEM1000SS User manual

Sunbeam

Sunbeam Pure Juice JE4700 User manual

Sunbeam

Sunbeam SCK02SMWBS User manual

Sunbeam

Sunbeam Tasty Treats! User manual

Sunbeam

Sunbeam EasyClean Snack-For-Four GR6400 Operational manual

Sunbeam

Sunbeam 4804 Technical specifications

Sunbeam

Sunbeam 32610078 User manual

Sunbeam

Sunbeam Slow Juicer JE9000 User manual

Sunbeam

Sunbeam EasyClean Snack-For-Two GR6200 Operational manual

Sunbeam

Sunbeam DURACERAMIC SKM6100DC User manual

Sunbeam

Sunbeam FoodSaver VAC430 User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions