Pintek DP-5205A User manual

DP-5205A/DP-5203A/DP-5201A

HIGH VOLTAGE DIFFERENTIAL PROBE

差動測試棒

Instruction Manual

TINSE56 Ver.01

TABLE OF CONTENTS

GENERAL SAFETY SUMMARY ----------------------------------------------------- 1

Safety Precautions -------------------------------------------------------------------------------------- 1

Explanation Symbols ------------------------------------------------------------------------------------2

Compliance Information-------------------------------------------------------------------------------- 2

PRODUCT INTRODUCTION --------------------------------------------------------- 3

Description of the Instrument and Accessories --------------------------------------------------- 4

Electrical Specifications -------------------------------------------------------------------------------- 5

General Specifications --------------------------------------------------------------------------------- 5

OPERATING INFORMATION ---------------------------------------------------------6

Connecting to the Instrument ------------------------------------------------------------------------- 6

Disconnecting from the Instrument ------------------------------------------------------------------ 7

Bandwidth Limit ------------------------------------------------------------------------------------------ 7

Twisting the Input Leads ------------------------------------------------------------------------------- 7

External Power Source --------------------------------------------------------------------------------- 8

Derating Curve ---------------------------------------------------------------------------------------- 8

MAINTENANCE--------------------------------------------------------------------------

Cleaning --------------------------------------------------------------------------------------------------- 9

Warranty --------------------------------------------------------------------------------------------------- 9

Repair ------------------------------------------------------------------------------------------------------ 9

ATTACHED (

Standard accessories

) ------------------------------------------------

⼀般安全概要

-----------------------------------------------------------------------------10

安全注意事項

------------------------------------------------------------------------------------------- 10

符號說明

------------------------------------------------------------------------------------------------- 10

安規說明

-------------------------------------------------------------------------------------------------- 11

產品介紹-

----------------------------------------------------------------------------------12

儀器及附件說明

---------------------------------------------------------------------------------------- 13

電氣規格

------------------------------------------------------------------------------------------------- 14

⼀般規格

------------------------------------------------------------------------------------------------- 14

操作說明

-----------------------------------------------------------------------------------15

連接到儀器

---------------------------------------------------------------------------------------------- 15

斷開與儀器連接

---------------------------------------------------------------------------------------- 17

頻寬限制

------------------------------------------------------------------------------------------------- 17

輸入引線絞線

------------------------------------------------------------------------------------------- 17

外部電源

------------------------------------------------------------------------------------------------- 18

降額曲線

---------------------------------------------------------------------------------------------- 18

產品維護

-----------------------------------------------------------------------------------18

附圖 (標準附件示意圖)

-----------------------------------------------------------------19

Differential voltage probes

GENERAL SAFETY SUMMARY

Review the following safety precautions to avoid injury and prevent damage to this product or any products

connected to it. To avoid potential hazards, use this product only as specified.

Only qualified personnel should perform service procedures.

Safety Precautions: to avoid fire or personal injury

Use proper power cord. Use only the power cord specified for this product and certified for the country of

use.

Connect and disconnect properly. Do not connect or disconnect probes or test leads while they are

connected to a voltage source.

Connect and disconnect properly. Connect the probe output to the measurement instrument before

connecting the probe to the circuit under test. Connect the probe reference led to the circuit under test before

connecting the probe input. Disconnect the probe input and the probe reference lead from the circuit under

test before disconnecting the probe from the measurement instrument.

Ground the product. This product is indirectly grounded through the grounding conductor of the mainframe

power cord. To avoid electric shock, the grounding conductor must be connected to earth ground. Before

making connections to the input or output terminals of the product, ensure that the product is properly

grounded.

Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings and markings on the product.

Consult the product manual for further ratings information before making connections to the product.

Do not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of

that terminal.

Respect the max input voltages:

1. Max differential voltage: ±1300 V (DC + AC peak) or 1838 VRMS.

2. Max voltage between each input terminal and ground: 919 VRMS.

Power disconnects. The power cord disconnects the product from the power source. Do not block the power

cord; it must remain accessible to the user at all times.

Do not operate without covers. Do not operate this product with covers or panels removed.

Do not operate with suspected failures. If you suspect that there is damage to this product, have it

inspected by qualified service personnel.

Avoid exposed circuitry. Do not touch exposed connections and components when power is present.

Use proper AC adapter. Use only the AC adapter specified for this product.

Do not operate in wet/damp conditions.

Do not operate in an explosive atmosphere. Keep product surfaces clean and dry.

Differential voltage probes

Explanation Symbols

The following symbol(s) may appear on the product:

Attention refers to operation Instructions.

Dangerous voltage may be present at terminals.

This instrument has double insulation.

Compliance Information

This product complies with the following safety regulations:

Electrical Safety to IEC 61010-1:

Dual Insulation

Installation Category III

Pollution Degree 2. (Note: Rated for indoor use only)

Rated Voltage or Max Live-Earth: 919 VRMS

CE Mark: conforms to EN 50081-1 and 50082-1 standards.

Differential voltage probes

PRODUCT INTRODUCTION

The DP-5205A series differential voltage probes provide a safety means of measuring floating potentials for

all models of oscilloscopes incomplete safety.

It converts the high differential voltage (≦±1300 DC+AC peak) into a low voltage (≦±2.6 V) with reference

to the earth for display on the oscilloscopes.

The BNC output is designed to operate on an input with an impedance of 1 MΩ. It is 2 times of the 50Ω.

DP-5205A series are designed for high sensitivity modules and high dynamic range. Attenuation x50, x500

are multiple of 50, which is easy for calculation without mistake. Maximum voltage is 2.6 KVp-p. These are

designed for high voltage.

Model Bandwidth Attenuation Oscilloscope interface

DP-5205A 100 MHz X50 / X500 BNC

DP-5203A 70 MHz X50 / X500 BNC

DP-5201A 35 MHz X50 / X500 BNC

Differential voltage probes

Description of the Instrument and Accessories

Model: DP-5205A/ DP-5203A/ DP-5201A

○

1 Integral Input Leads ○

2 Attenuation Function Switch

○

3 Bandwidth Function Switch ○

4 Power On/Off Indication

○

5 Overrange Indication ○

6 Output Connector/ BNC Cable

○

7 External Power Source [DC5V] ○

8 USB Cable (USB-510) [L=100cm]

○

9 Extender Leads (ETL-2100) [L=100cm] ○

10 Hook Clips (BP-256A)

○

11 Test Probes (BP-286N) ○

12 Alligator Clips (BP-276N)

○

13 AC adapter (ADP-51) [100~240V] ○

14 Plug Convertor (PLUG-220) [100~240V]

Differential voltage probes

Electrical Specifications

Function/ Model DP-5205A DP-5203A DP-5201A

Bandwidth (-3dB) DC - to 100 MHz (X500)

DC - to 90 MHz

(

X50

)

DC - to 70 MHz DC - to 35 MHz

ttenuation X50 / X500

ccurac

≦ ±2%

Voltage Input

Ran

≦±130 V (DC + AC peak) for X50, (i.e about 183 VRMS)

≦±1300 V (DC + AC peak) for X500, (i.e about 1838 VRMS)

Permitted Max. Input

olta

Max differential voltage: ±1300 V (DC + AC peak)

Max volta

e between each input terminal and

round: 919 VRMS

Input Impedance 5 MΩ// 2 pF each side to

round

Output Volta

e ≦ ±2.6 V

Output Impedance 50 Ω

(

for 1 MΩinput oscilloscope

)

Rise Time

≈

4 nS ≈6 nS ≈12 nS

Rejection Rate on

Common Mode 60 Hz: ＞80 dB / 100 Hz: ＞60 dB / 1 MHz: ＞50 dB

5 MHZ Limit

Bandwidth Switchable: Full / 5MHz

General Specifications

Model DP-5205A DP-5203A DP-5201A

Power Suppl

External 5 V DC

(

USB Input

)

, consumption about 300 m

Dimensions 175 x 68 x 28 mm

ht 285

emperature

Reference: +20 °C ~ +30 °C

Use: 0 °C ~ +50 °C

Stora

e: -30 °C ~ +70 °C

Relative Humidity

Reference: ≦70 %RH

Use: 10 % ~ 85 %RH

Stora

e: 10 % ~ 90 %RH

ccessories

Extender leads x 2pcs, Hook clips x 2pcs, Alligator clips x 2pcs,

Test probes x 2pcs, USB cable x 1pc, Plug convertor x 1pc,

C adapter x 1pc, Instruction manual

Differential voltage probes

OPERATING INFORMATION

Connecting to the Instrument

1. Connect to leads to the input and place the wire-grip on the circuit to be tested.

2. Connect the probe to the oscilloscope with the insulated BNC cable.

3. Adjust the vertical zero adjustment of the oscilloscope if necessary.

4. Select the attenuation ratio and the vertical deviation of the oscilloscope in accordance with the

conversion table1.

5. NB. The POWER light must come on.

table1. The conversion table gives the real vertical deviation:

ttenuation X500 X50

MAX Volta

e Input Ran

(

DC+AC Peak

)

± 1300 V ± 130 V

DC MAX INPUT ± 1300 V ± 130 V

C RMS MAX INPUT 1838Vrms 183Vrms

ertical deviation on the oscilloscope in V/div

Real Deviation In V/div

X500 Ran

e X50 Ran

1 500 50

0.5 250 25

0.2 100 10

0.1 50 5

50 m 25 2.5

20 m 10 1

10 m 5 0.5

5 m 2.5 0.25

2 m 1 0.1

Figure1.

Differential voltage probes

NOTE. The real vertical deviation in V/div is equal to the attenuation factor multiplied by the

range of vertical deviation selected on the oscilloscope. It will be doubled in the case of use of

a 50 Ωload.

Example:

With the probe on factor X50, the oscilloscope on 0.5 V/div,

the real vertical deviation is 50 x 0.5 = 25 V/div.

With a 50 Ωload on the input of the oscilloscope the deviation becomes 50 V/div

Disconnecting from the Instrument

WARNING. To avoid electrical shock, disconnect the probe inputs from the circuit before

disconnecting the probe from the instrument.

1. Turn the probe connector counterclockwise.

2. Pull straight out.

Bandwidth Limit

Slide the Bandwidth limit switch to limit the probe bandwidth to 5 MHz. The 5 MHz filter assists in the

characterization and testing of power supplies in switch mode by removing all high frequency content, noise

and harmonics from the measurement.

Twisting the input leads

Twisting the input leads helps to cancel noise from high-EMI environments that is induced into the input leads.

Figure2.

Figure3.

This manual suits for next models

Table of contents

Other Pintek Measuring Instrument manuals

Pintek

Pintek PA-659 User manual

Pintek

Pintek DP-25 User manual

Pintek

Pintek HVP-18HF User manual

Pintek

Pintek hvp-40 User manual

Pintek

Pintek DP-30K User manual

Pintek

Pintek DP-35 User manual

Pintek

Pintek PA-699 User manual

Pintek

Pintek DP-65 pro User manual

Pintek

Pintek PA-622 User manual

Pintek

Pintek DP-60HS User manual

Pintek

Pintek PA-677 User manual

Pintek

Pintek DP-16VF User manual

Pintek

Pintek DP-15K User manual

Pintek

Pintek HVP-10R User manual

Pintek

Pintek DP-800HS User manual

Pintek

Pintek HVP-40 User manual

Pintek

Pintek HVP-40M User manual

Pintek

Pintek PA-629 User manual

Pintek

Pintek DP-16K Series User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual