Miele KM 403 User manual

Installation Instructions

Ceramic hobs

KM 400 / 400-3 / 412 / 418 / 418-1

Ceramic contact grill

KM 408-1 / 408-2

Open grill KM 410 / 411 / 411-3

Deep fat fryer KM 402 / 403

To avoid the risk of accidents

or damage to the machine

it is essential to read these

instructions before it is

installed and used for the first time. M.-Nr. 04 930 397

en-GB

Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Building in ........................................................3

Additional safety notes on induction hobs / KM 418 / KM 418-1 ............4

Safety distance above the appliance .................................5

Safety distance between the KM 410 / KM 411 / KM 411-3 and a cooker hood

above it ........................................................5

Appliance dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

KM 400 / KM 400-3 / KM 408-1 / KM 408-2 / KM 412 .......................6

KM402/KM403...................................................7

KM 410 / KM 411 / KM 411-3..........................................8

KM 418 / KM 418-1 .................................................9

Worktop cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Fitting the spacer bars and spring clamps ..............................11

Fixing the spacer bars ..............................................12

Granite worktops................................................12

Fixing the spring clamps ............................................12

Granite worktops................................................12

Building in the appliance ............................................13

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Contents

Building in

Fit wall units and the cooker hood

before fitting the ceramic hob, to

avoid damaging the hob.

~The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C heat

resistant adhesive which will not

dissolve or distort. Any backmoulds

must be of heat-resistant material.

~Ideally the hobs should be installed

with plenty of space on either side.

There may by a wall at the rear and a

wall or tall unit at one side. On the other

side, however, no unit or divider may

stand higher than the hob (see

illustrations).

~An electric fryer must not be

installed next to a gas hob, as the gas

flames could ignite the fat in the fryer. It

is essential to maintain a safety

distance of at least 288 mm between

these two appliances.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate it is essential that a

minimum safety distance ais

maintained between the worktop

cut-out and adjacent kitchen units,

e.g. a tall unit, as follows:

40 mm = KM 400, 400-3, 402,

403, 412, 418, 418-1

50 mm = 408-1, 408-2

250 mm = KM 410, 411, 411-3

There must be a minimum safety

distance of 50 mm between the hob

and a back wall.

recommended

not recommended

not allowed!

Warning and Safety instructions

~After installation of the hob ensure

that the connection cable is without

hindrance and that there is no

mechanical obstruction which could

damage it, such as a drawer.

~These appliances must not be

installed over a dishwasher, washing

machine, tumble dryer, refrigerator,

fridge-freezer or freezer. The high

temperatures radiated by hobs could

damage the appliance below.

~This equipment may only be used in

mobile installations such as ships,

caravans, aircraft etc. if a risk

assessment of the installation has been

carried out by a suitably qualified

engineer.

~Spray canisters, aerosols and other

inflammable substances should not be

stored in a drawer under the hob.

Additional safety notes on induction

hobs / KM 418 / KM 418-1

~This hob must not be installed

above an oven or cooker unless these

have a built-in cooling down fan.

~To ensure adequate ventilation for

the electronic unit on the hob an interim

shelf must not be fitted underneath

hobs with induction heating.

Warning and Safety instructions

Safety distance above the appliance

A minimum safety distance bmust be

maintained between the hob and the

cooker hood above it. See the

manufacturer’s operating and

installation instructions for details. For

any flammable objects, e.g utensil rails,

wall units etc. a minimum safety

distance of at least 760 mm should be

maintained between it and the hob

below.

When two or more appliances are

installed together below a cooker

hood, e.g. a combiset and a gas

wok combiset, which have different

safety distances given in their

installation instructions you should

select the greater distance of the

two.

Safety distance between the KM 410 /

KM 411 / KM 411-3 and a cooker

hood above it

For safety reasons, the minimum

safety distance between the KM410/

KM 411 / KM 411-3 Open grill and a

cooker hood above it, is the same as

for gas hobs, i.e. 650 mm.

~The KM 410, 411, 411-3 should not

be used in conjunction with a cooker

hood that uses paper or carbon filters.

~The KM 410, 411, 411-3 should not

be used with a recirculating cooker

hood.

~When placing the KM 410, 411,

411-3 below a cooker hood, the outlet

system of the cooker hood must be

metallic throughout its length and be

heat proof.

~The cooker hood outlet ducting must

be in compliance with national and

local building regulations.

~Should any additional mechanical

ventilation be present then the effect of

this additional ventilation on the

combustion and flame performance of

any existing appliances must be

determined before any cooking

appliances are used.

~All grease filters must be cleaned

regularly. Fat build up in the filters is a

potential fire hazard.

~Never leave the grill unattended

when in use. It is possible for the food

being grilled to catch fire.

All dimensions in this instruction book

are given in mm.

Keep these instructions in a safe place

and pass them on to any future user.

Warning and Safety instructions

KM 400 / KM 400-3 / KM 408-1 /

KM 408-2 / KM 412

aSpring clamps

bProtective shelf

(KM 408-1 / KM 408-2 only)

A protective shelf and a front panel

must be fitted underneath KM 408-1

and KM 408-2 to ensure that the

underside of the appliance is not

accessible after installation.

~Ensure that the connection cable

cannot come into contact with the

underside of the appliance.

~A minimum distance of 80 mm is

required between the upper surface of

the worktop and the protective shelf

~A gap of 40 mm must be maintained

between the shelf and the rear wall.

Appliance dimensions

KM 402 / KM 403

aSpring clamps

bDrain tap

Appliance dimensions

KM 410 / KM 411 / KM 411-3

aSpring clamps

bDrain tap

Appliance dimensions

KM 418 / KM 418-1

aSpring clamps

bBuilding-in depth

cFront

dBuilding-in depth - mains connection box

Appliance dimensions

Dimensions 7 mm and 11 mm are the

space taken up by the frame of the

appliance on the worktop.

^Make a cut-out for the hob in the

worktop, paying attention to the

appliance height. See section

"Appliance dimensions".

Dimension "B" applies to a combination

of appliances and is shown on the

chart.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate it is essential that a

minimum safety distance is

maintained between the worktop

cut-out and adjacent kitchen units,

e.g. a tall unit. See Warning and

Safety instructions.

^Seal the cut surfaces with a suitable

sealant to avoid swelling caused by

moisture. The materials used must be

heat resistant.

Worktop cut-out

Number of

appliances

Depth

in mm

±1mm

Width

(=Dim. B)

in mm

±1mm

500

266

554

842

1130

1418

1706

1994

Important:

The maximum tolerance for the worktop

cut-out must not exceed±1mm.

When building in several combiset

appliances a spacer bar must be

fitted between each unit. (See

"Fitting the spacer bars and spring

clamps").

Worktop cut-out

Other manuals for KM 403

Table of contents

Other Miele Kitchen Appliance manuals

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions