Dash MANDOLINE User manual

ELECTRIC MANDOLINE

quickstart guide

DEM001H_20190228_QUICKSTARTGUIDE_v2.indd 1 3/20/19 10:50 AM

cutting guide cutting guide

When handling Blades and Inserts, be very careful as their blades are

sharp and can cause injury.

Blade Guide

The best way to understand how your blades go together is

to match the colors. For more, see page 10 of the manual.

Extra Thick

Slice

Julienne

Thin Slice

E1E1A

E1-C

Shred

E3E3-A

E3E3-B

E3E3-C

Cube

Large Cube

Wavy

* The blade numbers in the quickstart guide may not correspond to your model of Electric Mandoline.

Refer to the numbers below and in page 7 of the manual for blade numbers for your model.

ORANGE

IS FOR

SHREDDING

YELLOW

IS FOR

CUBES & WAVY

TEAL

IS FOR

SLICING &

JULIENNE

Shred chocolate, hard cheeses, radishes,

carrots, turnips, and more.

Use for potatoes, carrots, onions, sweet

potatoes, and beets. Make breakfast

hash and cubing vegetables for soup.

Cube potatoes, carrots, onions,

sweet potatoes, and beets. Perfect for

soups, stews, broth, and stir fry.

Prep potatoes and other softer

veggies for soups, crinkle fries,

and fun salads.

Shred

Cube

Large Cube

Wavy

Blade Guide

The best way to understand how your blades go together is

to match the colors. For more, see page 10 of the manual.

Extra Thick

Slice

Julienne

Thin Slice

E1E1A

E1-C

Shred

E3E3-A

E3E3-B

E3E3-C

Cube

Large Cube

Wavy

* The blade numbers in the quickstart guide may not correspond to your model of Electric Mandoline.

Refer to the numbers below and in page 7 of the manual for blade numbers for your model.

ORANGE

IS FOR

SHREDDING

YELLOW

IS FOR

CUBES & WAVY

TEAL

IS FOR

SLICING &

JULIENNE

Slice carrots, eggplant, melon, &

beets. Make fruit salad.

Slice potatoes, sweet potatoes,

carrots, celery, onion, & radish.

Make potato chips & salads.

Slices potatoes, radishes,

mushrooms, carrots, cucumbers,

fennel, nuts, & celery.

Extra Thick Slice

Julienne

Thin Slice

DEM001H_20190228_QUICKSTARTGUIDE_v2.indd 2-3 3/20/19 10:50 AM

using your blade disks blade and container assembly

Select Blade Disk and appropriate Blade Insert (see next

page for Cutting Guide). Slide Blade Insert into Blade

Disk. *There is no Insert required if using the Shredder

Disk. For detailed instruction, refer to pg.10 of the

Instruction Manual.

To remove Blade Insert, lift Insert up and slide it off of

the Disk. For the Cube / Large Cube / Wavy Disks,

simply slide the Insert out of the Disk.

Inserting

Removing

Make sure to place the Processing Base on

motor unit before placing the blade on base.

When placing Blade onto Processing Base,

ensuring that the tab under the Blade is inserted

into notch in the Motor Base.

NOTE: This notch will be in a different place

each time you stop the Mandoline. Pay careful

attention to make sure that the tab is inserted

into the notch and not in front of or behind

the notch.

When placing the Container under the Motor Base,

making sure to align the sides of the Container

with the slots under the Motor Base. Insert the

Container until the red arrow on the Container

lines up with the red arrow on the underside of

the Motor Base.

NOTE: There is a micro-switch under the Mandoline

that will not be activated if the Container is not

inserted properly.

using your blade disks blade and container assembly

DEM001H_20190228_QUICKSTARTGUIDE_v2.indd 4-5 3/20/19 10:50 AM

SAFELY REMOVING THE LID SAFELY REMOVING THE LID

Blades are very sharp and may cause injury. Be extremely careful while

assembling, disassembling, and cleaning the Electric Mandoline.

DO NOT hold the Lid by the side opposite the

Power Button while removing the Lid as this may cause

hands to come into contact with Blade.

Hold Processing Chute with one hand

and place the other hand on the back

of the Lid and Motor Base (near the

Power Button).

Using the hand holding the Processing

Chute, slide the Lid towards the back

until it is released from notches on

Motor Base. Use the other hand to

ensure that the Lid does not slip too

far backwards.

Lift Lid by the Processing Chute.

Blades are very sharp and may cause injury. Be extremely

careful while assembling, disassembling, and cleaning the

Electric Mandoline.

TO SAFELY REMOVE LID:

CAUTION

Hold Processing Chute with one hand

and place the other hand on the back of

the Lid and Motor Base (near the Power

Button).

Using the hand holding the Processing

Chute, slide the Lid towards the back

until it is released from notches on Motor

Base. Use the other hand to ensure that

the Lid does not slip too far backwards.

Lift Lid by the Processing Chute.

TO SAFELY REMOVE LID

SAFELY REMOVING THE LID

DEM001H_20190228_QUICKSTARTGUIDE_v2.indd 6-7 3/20/19 10:50 AM

cleaning your blades & inserts

Separate Blade Insert from Blade Disk. If using the Julienne/Slicer Disk, lift

the Insert up and then slide it out. If using the Cube/Large Cube/Wavy Disk,

simply slide Insert out and remove any remaining food with the Cube Insert

Cleaner.

STOCK# DEM001H_20190228_QUICKSTARTGUIDE_V2

To avoid staining, wipe Blades/Inserts with a cloth dipped in cooking oil.

Hand wash blades in warm, soapy water using included Brush accessory.

Alternatively, Blades and Inserts can be washed on the top rack of the

dishwasher on the lightest cycle only.

CAUTION: Handle Blades and Inserts with care as they are sharp and

may cause injury. Always store Blade Inserts with Covers to prevent possible

injury when removing from storage.

DEM001H_20190228_QUICKSTARTGUIDE_v2.indd 8 3/20/19 10:50 AM

Table of contents

Other Dash Kitchen Appliance manuals

Dash

Dash DMSW002 User manual

Dash

Dash Smartstore DSDR400 User manual

Dash

Dash DMPP100 Technical specifications

Dash

Dash Turbo POP Technical specifications

Dash

Dash DPM200 User manual

Dash

Dash Turbo POP User manual

Dash

Dash Mini Bundt DBCM100 User manual

Dash

Dash DBD200 User manual

Dash

Dash Mini Pizzelle Maker User manual

Dash

Dash SMARTSTORE DSSP100 Technical specifications

Dash

Dash DAPP150 User manual

Dash

Dash SUPERSEAL DSSVS200 Technical specifications

Dash

Dash DBBM900 Technical specifications

Dash

Dash DFAF450UP1 Technical specifications

Dash

Dash DOM001 User manual

Dash

Dash DMM100 User manual

Dash

Dash DEWS100 User manual

Dash

Dash DTGS14 Technical specifications

Dash

Dash FRESH POP DAPP150V2 User manual

Dash

Dash DBCMH100 Technical specifications

Dash

Dash Chief Series User manual

Dash

Dash FAMILY SIZE EGG BITE MAKER User manual

Dash

Dash DPM200 User manual

Dash

Dash DSV300 Technical specifications

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions