Vivo MOUNT-V001G User manual
Instruction Manual
Email: help@vivo-us.com
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
phillips screwdriver
1
- (x2)
Screw
- (x2)
Anchor
- (x2)
Washer
- (x4)
M4x12
- (x4)
M5x12
- (x4)
D5
(x1)
Monitor Arm
(x1)
5mm Allen Key
(x2)
Cover
- -!"##$$ %&#"#& $
&'( "
2
"
For concrete or brick wall installation, use a pencil to mark drilling
locations and drill 2/4” deep holes using a 3/8” bit. Mount arm (A) to
wall using screws (W-A) , anchors (W-B), washers (W-C).
" # )
Use a pencil to mark drilling location for wood beam and drill 2.2”
deep holes using 3/16”bit. Use of a stud finder is recommended.
Mount arm (A) to wall using screws (W-A) and washers (W-C). Do
NOT use anchors (W-B) for wood beam installation.
" ) Press covers (B) into screw holes.
" *
" +
Tighten the socket screw if the joints are making a popping sound.
Adjust arm tension by turning screw with Allen wrench (C). Turn
clockwise to reduce tension and turn counterclockwise to increase
tension. The tension should be just enough to hold your monitor In
place without lifting itself up. If needed, adjust bolts on the sides of
the hinge behind the VESA plate to tighten or loosen the tilt angle.
" ,
Remove cable cover by
removing the screw
underneath each one.
using mm Allen Wrench (C).
Install screws (M-A) or (M-B) with washers (M-C) in top two holes of
the monitor, leaving 3mm of space between the screw heads and
the monitor.
Hang monitor over top two slots of VESA plate, install two bottom
screws, and then tighten top screws,
" - ./
using mm Allen Wrench (C).
Tighten using mm Allen Wrench (C).
3
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: help@vivo-us.com
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
0(
Last updated: /1/2018 4
" 1
2 3
Insert cables and replace covers while making sure the cables have
enough slack to allow enough free movement of the arm.
Other Vivo TV Mount manuals
Vivo
Vivo MOUNT-VW01E User manual
Vivo
Vivo STAND-TV00Y User manual
Vivo
Vivo MOUNT-VESA01 User manual
Vivo
Vivo STAND-V003Z User manual
Vivo
Vivo MOUNT-VW03G User manual
Vivo
Vivo MOUNT-TVSG1 User manual
Vivo
Vivo MOUNT-SFTV4A User manual
Vivo
Vivo MOUNT-VWSF1 User manual
Vivo
Vivo MOUNT-POLE4A User manual
Vivo
Vivo Mount-E-FD55 User manual
Vivo
Vivo STAND-V002 User manual
Vivo
Vivo MOUNT V Flat Ceiling MountC55B User manual
Vivo
Vivo MOUNT-VWSF1W User manual
Vivo
Vivo STAND-TV55T/W User manual
Vivo
Vivo MOUNT-VW06 User manual
Vivo
Vivo STAND-TV07A User manual
Vivo
Vivo MOUNT-VBHA1 User manual
Vivo
Vivo STAND-TV00J User manual
Vivo
Vivo MOUNT-E-UP65A/AW User manual
Vivo
Vivo MOUNT-VWSF1 User manual
