Vivo MOUNT-VW080S User manual
Ultra Slim TV Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw080s
SKU: MOUNT-VW080S
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
TOOLS NEEDED
88lbs
(40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Wall Plate
B(x2)
VESA Bracket
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M8x20
M-D (x4)
M6x30
M-E (x4)
M8x30
M-F (x4)
Square
Washer
M-G (x8)
5mm Spacer
M-H (x4)
15mm Spacer
W-A (x4) W-B (x4) W-C (x4)
3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall Installation
Use the wall plate (A) to mark
mounting holes on the wall where
studs are located. Use of a stud
finder is highly recommended.
Using a 3/16” (4.5mm) drill bit, drill
holes at least 2.2” (55mm) deep into
marked locations. Attach mount
to wall using screws (W-A) with
washers (W-C).
4
STEP 1 (continued)
OPTION B: Concrete/Brick Wall
Installation
Use the wall plate (A) to mark mounting
holes on the wall. Using a 3/8” (10mm) drill
bit, drill holes at least 2.4” (60mm) deep
into marked locations. Press anchors (W-B)
into holes, then attach mount to wall using
screws (W-A) with washers (W-C).
5
STEP 2
With TV face down on a flat surface, secure VESA brackets (B) to the TV using bolts (M-A to
M-E) with square washers (M-F) and spacers (M-G, M-H) where applicable. Ensure the VESA
brackets are mounted evenly.
6
STEP 3
Hang the TV with VESA brackets over the wall plate. Push the TV back lightly to
engage the latches.
7
STEP 4
To remove the TV from the mount, pull down on the cords to release the
latches. Move the TV forward slightly, then li o from the wall plate.
LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Table of contents
Other Vivo TV Mount manuals
Vivo
Vivo STAND-V002T User manual
Vivo
Vivo STAND-TV00Y User manual
Vivo
Vivo MOUNT-POLE4 User manual
Vivo
Vivo MOUNT-E-UP65A/AW User manual
Vivo
Vivo STAND-TV07W User manual
Vivo
Vivo STAND-RACE1TV User manual
Vivo
Vivo STAND-V002T/W User manual
Vivo
Vivo STAND-TV02PB User manual
Vivo
Vivo STAND TV00J User manual
Vivo
Vivo MOUNT-SPSB3 User manual
Vivo
Vivo STAND-TV07A User manual
Vivo
Vivo MOUNT-E-FD70 User manual
Vivo
Vivo MOUNT-VW080P User manual
Vivo
Vivo MOUNT-VW120M User manual
Vivo
Vivo MOUNT VW01 User manual
Vivo
Vivo MOUNT-SPSB5 User manual
Vivo
Vivo MOUNT-E-MM070W User manual
Vivo
Vivo MOUNT-VW06 User manual
Vivo
Vivo MOUNT-POLE4A User manual
Vivo
Vivo STAND-TV00M4 User manual
