Vivo STAND-TV03E User manual

Mobile TV Cart

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-tv03e

[email protected]om www.vivo-us.com 1-800-371-5654

SKU: STAND-TV03E

2 3

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

Phillips

Screwdriver

Attach wheels (9) to the long and short square

tubing (1,2) using the provided wrench (15).

STEP 2

Attach the square tubing (1,2) to the tube

connector (3) using M6x60 Allen head bolt

(11) and the M6 socket plate (12).

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

turn this nut to adjust

the height of the wheel

PACKAGE CONTENTS

1 (x2)

Long Square

Tube

2(x2)

Short Square

Tube

3(x1)

Tube

Connector

9 (x4)

Wheel

10 (x2)

Square Plate

Connector and

Rubber Pad

11 (x8)

M6x60

12 (x4)

M6 Socket

Plate

8(x4)

Pole Cover

4 (x1)

Tube Connector

Cover

5 (x2)

Pole with

Holes

6 (x2)

Pole without

Holes

7 (x2)

Pole

Connector

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

14 (x2)

M5x6 Grub

Screw

13 (x14)

M6x10

15 (x1)

Tool Kit

22 (x4)

M6x20

M6x35

23 (x4)

M8x20

M8x35

M8x45

21 (x4)

M4x12

M4x30

17 (x2)

Shelf Support

18 (x4)

M4x6

20 (x1)

TV Arm Set

24 (x4)

M4 Washer

19 (x1)

Square

Plate

25 (x12)

M6 Washer

26 (x4)

M8 Washer

27 (x4)

M4 Spacer

M6/8 Spacer

(20mm)

28 (x8)

M6/8 Spacer

(5mm)

16 (x1)

Shelf

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

12 1

Front

Bac k

Hole for Part 13

110 lbs

(49.9 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury. 10 lbs

(4.54 kg)

CART SHELF

4 5

STEP 3

Attach the base poles (5) to the tube connector (3) using M6x10 bolts (13) in the back and M5x6 grub

screws (14) in the sides. Thread on the pole connectors (7) to the tops of each base pole (5). Use

caution when threading pole connectors. Threads are very ne and may have sharp edges.

STEP 4

4a: Slide the tube connector cover (4) over the

base poles (5) and t over the tube connector (3).

4b: Thread the top poles (6) to the pole connectors

(7) and insert the pole covers (8) into the top.

STEP 5

5a: Slide the square plate connectors and rubber

pads (10) over the top of the poles (6) and

tighten the grub screw using tool kit (15).

5b: Attach the square plate (19) to the square plate

connectors (10) with 8 6x10 Allen head bolts (13)

and 8 M6 washers (25) using tool kit (15).

STEP 6

6a: Clip bubble level from tool kit (15) onto the

square plate (19). Adjust the level of the square

plate (19) by loosening the grub screw in the

back of the square plate connector (10) using

tool kit (15). Tighten grub screws again once

you’ve reached desired height and level.

6b: Secure TV arm set (20) to the back of your

television using bolts (21-23) and washers (24-26),

depending on the size of the mounting holes on

the television. For curved or recessed TVs, a spacer

may be required (27,28).

Remove plastic sleeves

before attaching the par t 4

Attach bubble level

to the w al l plate

6 7

STEP 7 STEP 9

Attach the TV arm set (20) to the square plate (19). Tighten the safety bolts on the bottom of the TV

arm set (20) to secure the television to the stand.

To attach the shelf (16), rst attach the shelf supports (17) to the bottom poles (5) using 4 M6x10 Allen

head bolts (13). Once secured, attach the shelf (16) to the supports (17) using 4 M4x6 countersink

bolts (18).

STEP 8

8a: If additional leveling and height adjustment

is required aer television is attached, repeat

step 6.

8b: For wire management, cables can be run

through the tops of the pole covers (8) and down

through the poles.

OPTION A

OPTION B

13 17

Last Updated: 1/9/2019

If any parts are received damaged or defective, please contact us. We are happy to

replace parts to ensure you have a fully functioning product.

For more VIVO products, check out our website at:

www.vivo-us.com.

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected]om www.vivo-us.com 1-800-371-5654

Table of contents

Popular TV Mount manuals by other brands

Ergotron

Ergotron Neo Flex Cantilever UHD user guide

StarTech.com

StarTech.com FPCEILBTB user manual

VonHaus

VonHaus 05/038 instruction manual

Techlink

Techlink ECHO TV manual

Sandstrom

Sandstrom SSTVMC12X instruction manual

Sony

Sony SU-WL700 Additional information for Using

ICW

ICW SCACC18 installation instructions

LG WM-L640V owner's manual

Gembird

Gembird WM-65ST-01 user manual

ERARD

ERARD FiTUP XXL 035320 quick start guide

PEERLESS

PEERLESS PLCK-1 Installation and assembly

Kanto

Kanto RCF180 user manual

GEM

GEM GEM GP001 instructions

Gladiator Joe

Gladiator Joe GJ0A0053 quick start guide

Vivotek

Vivotek AM-105 installation guide

AmazonBasics

AmazonBasics B07QG3LMG4 manual

Secura

Secura QLF210 instruction manual

Marquant

Marquant 929-083 Operating instructions in original