Vivo MOUNT-VWSF1W User manual
White TV Wall Mount and Entertainment Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vwsf1
SKU: MOUNT-VWSF1W
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
66lbs
(30kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Mount
B(x2)
Plastic Cover
C(x1)
Cable Clip
W-A (x3)
Bolt
M-A (x4)
M6x14
M-B (x4)
M8x20
M-C (x4)
M8x50
M-D (x4)
Spacer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
W-C (x1)
Washer
W-B (x3)
Anchor
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
D(x4)
VESA Adapter
E(x4)
M6x15
A2 (x1)
Shelf Bracket
B2 (x1)
Shelf
C2 (x2)
Shelf Clip
D2 (x2)
M5x8
E2 (x2)
Suction Cup
W-A2 (x3)
Bolt
W-C2 (x3)
Washer
W-B2 (x3)
Anchor
F(x4)
M6 Nut
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
22lbs
(10kg)
TV
DVD
3
TV MOUNT ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Use mount (A) to mark mounting holes on wall where stud is located. Using a 3/16” bit, drill
approximately 2.2” into marked locations. Screw top two bolts (W-A) in making sure to leave 3mm of
threads exposed.
OPTION B: Concrete/Brick Wall
Use mount (A) to mark mounting holes on wall. Using a 3/8” bit, drill approximately 2.4” into marked
locations. Insert wall anchors (W-B) and screw in top two bolts (W-A) making sure to leave 3mm of
threads exposed.
AW- A
XX
3m m
W- A
W- B
3m m
4
STEP 2
Mount VESA adapters (D) to VESA
plate using bolts (E) and nuts (F)
in the appropriate conguration
to match your television
mounting holes.
STEP 3
STEP 4
Slide mount (A) over two bolts (W-A) already
inserted into wall and insert third bolt and
washer (W-C) into bottom hole. Tighten
using phillips head screwdriver.
Aer placing TV on a at surface, attach VESA plate to back using bolts (M-A, M-B). Make sure top of
mount is facing top of TV. If bolts are too long, spacers (M-D) may be required as shown in diagram. If
you use a Samsung TV with deeper VESA holes, please use M8x50 screws and Samsung spacers (these
spacers are included with Samsung TV).
F
E
D
400m m
300m m
300m m
400m m
400mm
200m m
D
E
F
M- A
M- B
M- B
M- D
W- C W- A
5
STEP 5
Insert plastic covers (B) as shown in diagram.
STEP 6
Attach cable management clip (C) to bottom of
mount (A).
STEP 7
Run cables through cable management clip (C)
and adjust monitor to desired angle as shown in
diagram.
SHELF ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Using the shelf bracket (A2) as a guide, mark the mounting holes on the wall where a stud is located.
With a 4mm bit, drill approximately 2” into wall. Using bolts (W-A2) and washers (W-C2), mount the
shelf bracket (A2) onto wall. Ensure the mounting screws are anchored into the center of the studs. The
use of a stud nder is highly recommended.
B
C
2 3
180°
+20°
-20°
1
A2
XX
W- A2
W- C2
6
STEP 1 (Continued)
OPTION B: Concrete/Brick Wall
Using shelf bracket (A2) as a guide, mark mounting holes on wall. With a 5/16” bit, drill approximately
2.2” into wall. Insert concrete anchors (W-B2), bolts (W-A2) and washers (W-C2) to mount the shelf
bracket (A2) onto wall as shown in diagram.
Insert plastic clips (C2) into shelf bracket (A2).
STEP 2
Attach suction cups (E2) to shelf bracket (A2) as shown in diagram.
STEP 3
W-B2
W- A2
W- C2
C2
E2
7
STEP 4
Slide shelf (B2) into clips (C2).
STEP 5
Use bolts (D2) to attach the shelf (B2) into place using a phillips head screwdriver as shown in the
diagram.
STEP 6
Place desired objects on shelf.
B2
D2
D2
LAST UPDATED: 10/19/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Table of contents
Other Vivo TV Mount manuals
Vivo
Vivo MOUNT-VW100T User manual
Vivo
Vivo MOUNT-TV01LB User manual
Vivo
Vivo MOUNT-E-UP65A User manual
Vivo
Vivo MOUNT-M-MM070R User manual
Vivo
Vivo STAND-TV04M User manual
Vivo
Vivo STAND-TV120B User manual
Vivo
Vivo MOUNT-VWSF1 User manual
Vivo
Vivo MOUNT-SF05L User manual
Vivo
Vivo MOUNT-M-FD37 User manual
Vivo
Vivo MOUNT-SPSB5 User manual
Vivo
Vivo MOUNT-E-FD70 User manual
Vivo
Vivo MOUNT-POLE4A User manual
Vivo
Vivo MOUNT-VW02A User manual
Vivo
Vivo MOUNT-SONOS3T User manual
Vivo
Vivo STAND-V012 User manual
Vivo
Vivo MOUNT-MM01B User manual
Vivo
Vivo MOUNT V Flat Ceiling MountC55B User manual
Vivo
Vivo STAND-V002DU User manual
Vivo
Vivo MOUNT-SFTV4 User manual
Vivo
Vivo MOUNT-VC55A User manual
