U-Line 515 User manual

QUICK START GUIDE

5 CLASS

30615_A

QUICK START GUIDE u-line.com

WELCOME TO U-LINE



ice making, refrigeration, and wine preservation experience. U-Line continues to be the American leader, delivering versatility



product collection includes Wine Captain®Models, Beverage Centers, Clear Ice Machines, Nugget Ice Machines, Crescent Ice

Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, Combo®Models, and more.



and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,



two decades and is proud to have the opportunity to ship to you.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, Compliance Documentation,

and Product Warranty information are all available for reference and download at u-line.com.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following

steps:

1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.

2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been



GENERAL INQUIRIES

U-Line Corporation

8900 N. 55th Street

Milwaukee, Wisconsin 53223 USA

Monday - Friday 8:00 am to 4:30 pm CST

T: +1.414.354.0300

F: +1.414.354.7905

Email: sales@u-line.com

u-line.com

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 4:30 pm CST

T: +1.800.779.2547

F: +1.414.354.5696

Service Email: onlineservice@u-line.com

Parts Email: onlineparts@u-line.com

CONNECT WITH US

Designed, engineered and assembled in WI, USA

QUICK START GUIDE u-line.com

This Quick Start Guide covers the basics of installation and general use of your product.

For more details, see the complete User Guide & Service Manual on u-line.com.

This product is eligible for an additional one-year warranty at no charge when you register your product on u-line.com.

See complete warranty for details.

CONTENTS

Safety and Warning 4

Environmental Requirements 5

Electrical 5

Door Swing 8

Door Adjustments 8

General Installation 7

Anti-Tip Bracket 8

Integrated Panel Installation 8

Control Operation 10

First Use 10

     

Interior Adjustments 12

Cleaning 15

Warranty 16

plus

eligible

warrantywarranty

QUICK START GUIDE u-line.com

Safety and Warning

NOTICE

Please read all instructions before installing,

operating, or servicing the appliance.

Use this appliance for its intended purpose only and follow

these general precautions with those listed throughout this

guide:

SAFETY ALERT DEFINITIONS

Throughout this guide are safety items labeled with a

Danger, Warning, or Caution based on the risk type:

Danger means that failure to follow this safety

statement will result in severe personal injury or

death.

Warning means that failure to follow this safety

statement could result in serious personal injury

or death.

Caution means that failure to follow this safety

statement may result in minor or moderate

personal injury, property, or equipment damage.

This unit contains R600a (Isobutane) which is a

ammable hydrocarbon. It is safe for regular

use. Do not use sharp objects to expedite

defrosting. Do not service without consulting the

“R600a specications” section included in the

User Guide. Do not damage the refrigerant

circuit.

Service must be done by factory authorized

service personnel. Any parts shall be replaced

with like components. Failure to comply could

increase the risk of possible ignition due to

incorrect parts or improper service.

CALIFORNIA PROPOSITION 65

This product contains chemicals known to the

state of California to cause cancer and birth

defects or other reproductive harm.

www.P65warnings.CA.gov

DANGER

WARNING

CAUTION

WARNING

QUICK START GUIDE u-line.com

Environmental Requirements

This model is intended for indoor/interior applications only

and is not to be used in installations that are open/

exposed to natural elements.

This unit is designed to operate between 50°F (10°C) and

100°F (38°C). Higher ambient temperatures may reduce



ice production on applicable models.

For best performance, keep the unit out of direct sunlight

and away from heat generating equipment.

In climates where high humidity and dew points are

present, condensation may appear on outside surfaces.

This is considered normal. The condensation will

evaporate when the humidity drops.

Damages caused by ambient temperatures of

40°F (4°C) or below are not covered by the

warranty.

Electrical

SHOCK HAZARD — Electrical Grounding

Required. Never attempt to repair or perform

maintenance on the unit until the electricity has

been disconnected.

Never remove the round grounding prong from

the plug and never use a two-prong grounding

adapter.

Altering, cutting or removing power cord,

removing power plug, or direct wiring can cause

serious injury, re, loss of property and/or life,

and will void the warranty.

Never use an extension cord to connect power to

the unit.

Always keep your working area dry.

NOTICE

Electrical installation must observe all state and

local codes. This unit requires connection to a

grounded (three-prong), polarized receptacle

that has been placed by a qualied electrician.

The unit requires a grounded and polarized 115 VAC,

60 Hz, 15A power supply (normal household current). An

individual, properly grounded branch circuit or circuit

breaker is recommended. A GFCI (ground fault circuit



appliances and is not recommended for your unit because

it could be prone to nuisance tripping. However, be sure

to consult your local codes.

CAUTION

QUICK START GUIDE u-line.com

Door Swing

For Integrated models that are installed adjacent to a wall,

1/2” (13 mm) clearance is recommended from wall on

hinge side to allow the door to open 90°. Allow for

additional space for any knobs or pulls installed on the

integrated panel/frame.

Stainless Steel models that are installed adjacent to a wall

require 2-1/4” (57 mm) door clearance on hinge side to

allow for door handle.

Units have a zero clearance when installed adjacent to

cabinets.

Door Adjustments

DOOR ALIGNMENT AND ADJUSTMENT

Align and adjust the door if it is not level or not sealing

properly. If the door is not sealed, the unit may not cool

properly, or excessive frost or condensation may form in

the interior.

NOTICE

Properly aligned, the door’s gasket should be

rmly in contact with the cabinet all the way

around the door (no gaps). Carefully examine the

door’s gasket to ensure that it is rmly in contact

with the cabinet. Also make sure the door gasket

is not pinched on the hinge side of the door.

Do not attempt to use the door to raise or pivot

your unit. This would put excessive stress on the

hinge system.

Alignment and Adjustment Procedure

1. Open door and remove gasket near the hinges.

2. Using a T-25 Torx bit, loosen each pair of Torx head

screws both the upper and lower hinge plates.

3. Square and align door as necessary.

4. Tighten Torx head screws on hinge.

5. Reinstall gasket into the channel starting at the corner.

T-25 Torx Screw

Wall Wall

90°

Door Swing

90°

Door Swing

Space Required

For any Knobs or Pulls

2-1/4" MIN

(57 mm MIN)

3000 Series

Integrated

Stainless

1/2" (13 mm)

QUICK START GUIDE u-line.com

REVERSING THE DOOR

1. Open door.

2. Using T-25 Torx bit loosen screw #1 and remove screw

#2 on top and bottom hinge. Slide and remove the

door from the unit.

Note: One hinge includes a metal spacer. Spacer

must be used with that hinge when reversing the

door.

3. Remove caps from screw heads on opposite side (2 on

top and 2 on bottom). Using #2 Phillips bit, remove

the 4 underlying screws. Reinstall the screws and caps

on the opposite side.

4. Partially install screw #1 in the outer most holes on

top and bottom. Rotate door 180o, align hinge over

screw #1 and slide/seat into position. Reinstall screw

#2 on top and bottom. Tighten both screws and install

hinge cover.

Align and adjust the door:

Align and adjust the door (see DOOR ALIGNMENT AND

ADJUSTMENT).

General Installation

LEVELING INFORMATION

1. 

the unit is level. Level

should be placed

along top edge and

side edge as shown.

2. If the unit is not level, adjust the legs on the corners of

the unit as necessary.

3. 

repeat the previous steps as needed.

INSTALLATION TIP



opening, adjust the rear legs to achieve a total unit rear

height of 

Shorten the unit height in the front by adjusting the front

legs. This allows the unit to be gently tipped into the

opening. Readjust the front legs to level the unit after it is

correctly positioned in the opening.

INSTALLATION

1. Plug in the power/electrical cord.

2. Gently push the unit into position. Be careful not

to entangle the cord or water and drain lines, if

applicable.

3. Re-check the leveling, from front to back and side to



surface should be approximately ” (3 mm) below

the countertop.

4. Install the anti-tip bracket.

5. Remove interior packing material and wipe out the

inside of the unit with a clean, water-dampened cloth.

Turn to Adjust

QUICK START GUIDE u-line.com

Anti-Tip Bracket

Use one of the methods below to secure the unit

CABINET/COUNTER ANTI-TIP INSTALLATION

(For built-in applications)

1. Slide unit out so screws on front of unit are easily

accessible.

2. Remove the two screws from the front of the unit.

3. Bend bracket along one of the perforations to allow

attachment to the desired adjoining surface.

4. Gently push unit into position. Be careful not to

entangle the electrical cord or water line, if applicable.

5. Check to be sure the unit is level from front to back

and side to side. Make any necessary adjustments.

”

(3 mm) below the countertop.

6. Secure bracket to adjoining surface.

FLOOR MOUNTED ANTI-TIP INSTALLATION

(For free-standing applications)

1. Locate two anti-tip brackets included with the kit.

2. Place the unit into the area where it will be installed.



test to make sure the door opens and closes freely.

3. 



center of the unit.

4. Remove the unit. Using a square, extend center line

“B” (see chart below). This line serves as the back

edge for the anti-tip brackets. From the center line,

measure “A” to the left and right. This line is the outer

edge of each bracket.

Back wall

Back of unit

Front of unit

Surrounding

area (Top view)

515 518 524

A7  9” 11 ”

B22” 22” 22”

5. 

drawn for the outer edge. Mark spots for the screw

holes.

Surrounding

area (Top view)

Drill holes and

mount anti-tip

brackets to ﬂoor Back wall

Front

unit

Back

unit

6. Use a 1/8” drill to make two starter holes and fasten



provided.

7. Place the unit back into position, making sure the

feet engage the anti-tip brackets properly. Check



3 with the position of the front feet to ensure proper

positioning.

QUICK START GUIDE u-line.com

Integrated Panel Installation

Integrated Models Only

1. Fully open door.

2. Starting at corner, pull gasket

away from door.

3. Continue to pull gasket free from

gasket channel.

4. Upon removal, lay gasket down on



5. Align top of panel with top edge of

door. Center panel on door.

NOTICE

Due to dierences in oor construction or

surrounding cabinetry, the panel may not sit

ush with the top of the door.

6. Secure integrated

panel to door using

clamps. A robust

tape may also

be used. U-Line

recommends the

use of bar clamps

to secure the panel

to the door. If using

tape, be certain the

tape will not damage



removal.

7. Using a 7/64” (3

mm) drill bit, drill 6

pilot holes into the

wood panel 1/2” (12

mm) deep using the

holes in the door

frame as a guide.

NOTICE

It is important to ensure that all drilled holes are

drilled to the correct depth in order to avoid

splits in the wood when hardwood is installed.

8. Locate 6 of the #6x 1-1/2” (38 mm) screws provided

with your unit.

9. Using a Phillips screwdriver, place one screw into

each of the 6 pilot holes and screw down. Do not

overtighten screws.

10. 

channel.

11. Remove clamps from door.

If panel requires additional adjustments after

removing clamps, slightly loosen each screw and

adjust panel as necessary. Tighten screws upon

completion.

12. Starting at the corners, re-install the gasket into the

gasket channel in the frame. Make sure the gasket is

fully seated.

Wood

Panel

Door/Drawer

Bar

Clamp

Bar

Clamp

Integrated Panel Integrated Panel

QUICK START GUIDE u-line.com

Control Operation

CONTROL FUNCTION GUIDE

FUNCTION COMMAND NOTES

ON/OFF Press and release Unit will immediately turn On or OFF

Adjust Temperature Press or and release



adjust the set point temperature. Note: temperature

displayed is the actual temperature inside unit

Toggle between oF / oC Hold and for 5 seconds The display will change units

Leave interior light on

Press and release to leave interior

light on for 12 hours; press again to

deactivate

After 12 hours, factory default is restored; light will

turn on when door is open

Adjust light color While holding press and release

to scroll through lighting options

Option Open Door Closed Door

00 White White

01 Blue Blue

02 White Blue

Light will be set at full intensity when door is open,

and 50% intensity when door is closed.

Enable Sabbath Mode Press and hold for 5 seconds and

release

The oF / o

Interior light and display will go dark and remain so

until user resets mode - unit continues to operate

Disable Sabbath Mode Press and release Display and interior light return to normal operation

www.star-k.org for more

details.

DOOR ALERT NOTIFICATION

When the door is left open for more than 5 minutes:

• A tone will sound for several seconds every minute

• will appear in display

• Closed door to silence alert and reset

Temperature displayed reects actual

temperature inside unit.

Initial startup requires no adjustments. When plugged

in, the unit will begin operating under the factory default



simply press and the unit will immediately switch on. To





unit is progressing towards the selected temperature. Time

to reach set point varies based upon ambient temperature,

temperature of product loaded, door openings, etc. U-Line

recommends allowing the unit to reach set points before

NOTICE

First Use

This manual suits for next models

Table of contents

Other U-Line Kitchen Appliance manuals

U-Line

U-Line UACP115-IS01A User manual

U-Line

U-Line UHRE124-SS81A Installation manual

U-Line

U-Line Wine Captain UHWC515SG51A Installation manual

U-Line

U-Line UHBD524-SG01A Installation manual

U-Line

U-Line UHBV115-SG01A Installation manual

U-Line

U-Line Wine Captain UHWC518-IG01A Installation manual

U-Line

U-Line 5 Class UHBV515 Installation manual

U-Line

U-Line U-1215WCB-00B Installation manual

U-Line

U-Line Origins 75BEV User manual

U-Line

U-Line Wine Captain UHWD524 Installation manual

U-Line

U-Line 2175BEVS User manual

U-Line

U-Line Wine Captain Echelon Series User manual

U-Line

U-Line 3060R Installation manual

U-Line

U-Line Wine Captain UHWC524SG41A Installation manual

U-Line

U-Line U-29RB-13A Installation manual

U-Line

U-Line UCBR552-SS01A Installation manual

U-Line

U-Line U-2224ZWCINT-00A Installation manual

U-Line

U-Line UHBD524 Installation manual

U-Line

U-Line Echelon Series User manual

U-Line

U-Line U-3036BVWCS-00B Installation manual

U-Line

U-Line UHWC024-SG02A User manual

U-Line

U-Line Wine Captain ADA Series User manual

U-Line

U-Line U-1224WCINT-00B Installation manual

U-Line

U-Line 2224BEV User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions