Sper scientific 800021 User manual
1
RH/Temperature
SD Card Datalogger
800021
Instruction Manual
2
RH/Temperature SD Card Datalogger - 800021
Copyright ©2010 by Sper Scientic
ALL RIGHTS RESERVED
Printed in the USA
The contents of this manual may not be reproduced
or transmitted in any form or by any means electronic,
mechanical, or other means that do not yet exist or may
be developed, including photocopying, recording, or any
information storage and retrieval system without the express
permission from Sper Scientic.
SPER SCIENTIFIC LTD.
8281 E. Evans Rd., Suite #103
Scottsdale, AZ 85260
(480) 948-4448
3
TABLE OF CONTENTS
INTRODUCTION ................................................................ 4
FEATURES .......................................................................... 5
MATERIALS SUPPLIED .................................................... 6
POWER SUPPLY ................................................................ 6
METER COMPONENTS .................................................... 7
KEYPAD .............................................................................. 9
SETUP MODE ................................................................... 10
MEASUREMENT PROCEDURES ................................... 14
DATALOGGER .................................................................. 18
BATTERY REPLACEMENT ............................................. 21
TROUBLESHOOTING ..................................................... 21
OPTIONAL ACCESSORIES ............................................ 22
SPECIFICATIONS ............................................................ 23
WARRANTY ...................................................................... 28
4
INTRODUCTION
The Sper Scientic RH/Temperature SD Card Datalogger
(Model 800021) is an extremely accurate meter with fast
response times that reads relative humidity (RH), ambient
temperature, dew point, wet bulb, and functions as a Type
K/J thermocouple thermometer.
This meter features a real time SD memory card
datalogger. Standard, portable SD memory cards provide
unlimited data storage and upload pre-formatted data
directly to Excel, eliminating the need for cables or
software. Alternatively, manually record 99 readings for
on-screen review or stream data directly to a computer
using the optional software and cables. Each data set
includes temperature, RH, time and date.
5
FEATURES
• Functions as humidity/temperature, dew point, wet bulb,
and Type K/J thermometer
•SD memory card datalogger
•Manual datalogger option
•Fast response time for humidity
•Highly accurate microcomputer circuit
•Direct upload of data to Excel
• Detachable probe for measuring exibility
•Internal clock and calendar
•Touch-tone
•Tripod mounting screw
•Built-in tabletop stand
•Maximum and minimum
•Hold function
• Auto-power-o
•Low battery indicator
•Backlight
6
MATERIALS SUPPLIED
•Meter
•Probe
•SD Card
•6 AA Batteries
•Instruction Manual
•Soft Carrying Case
POWER SUPPLY
This meter can be powered by six AA (1.5 V, UM3) batteries
or an optional 9 Volt DC adapter. See page 21 for battery
replacement instructions.
Plug the adaptor into the power port labeled “DC 9V,” located
on the side of the meter.
Note…
When using the adapter to run the meter, the meter will remain
permanently on and the POWER button will be disabled.
7
METER COMPONENTS
Top of Meter
Bottom of Meter
Side of Meter
Type K/J
Thermometer
Socket
Humidity/
Temperature
Probe Input
Socket
SD Card
Socket
RESET
DC 9V Adapter
Input Socket
8
METER COMPONENTS
Back of Meter
Probe
Tripod
Mounting
Screw
Stand
Battery
Cover
Screws
Battery
Compartment/
Cover
Probe
Plug
Probe
Head
Probe
Handle
9
KEYPAD
LCD
Display
HOLD/
NEXT
REC/
ENTER
LOGGER
(▼, SAMPLING
TIME CHECK)
POWER
(ESC,
Backlight)
SET (▲,
TIME CHECK)
10
SETUP MODE
The advanced Setup Mode allows you to customize the
following meter preferences and defaults:
•Real Time Clock
•Decimal Type
• Auto Power O
•Touch-Tone
• Thermometer Type K/J
•Temperature Units
•Sampling Time
•SD Memory Card Format
Note…
The setup functions can be performed under any parameter
but not while utilizing the datalogger function. Once
selections are saved, the meter will default to the selected
preferences when the meter is turned o and on again.
Once a selection is saved, the meter automatically advances
to the next setup function (i.e., after setting the real time
clock, the meter will automatically enter the decimal type
setup function).
1. Press POWER to turn the meter on.
2. Press SET for 2 seconds or longer to enter Setup Mode.
3. Press NEXT to cycle through the setup functions.
Note…
Press ESC to exit Setup Mode. The meter will return to
Normal Mode.
Table of contents
Other Sper scientific Measuring Instrument manuals
Sper scientific
Sper scientific 850003 User manual
Sper scientific
Sper scientific 850026 User manual
Sper scientific
Sper scientific 850014 User manual
Sper scientific
Sper scientific 800015 User manual
Sper scientific
Sper scientific 850081 User manual
Sper scientific
Sper scientific 850009 User manual
Sper scientific
Sper scientific AquaShock 850046K User manual
Sper scientific
Sper scientific 840029 User manual
Sper scientific
Sper scientific 840022 User manual
Sper scientific
Sper scientific 840062 User manual
Sper scientific
Sper scientific 840065 User manual
Sper scientific
Sper scientific 300056 User manual
Sper scientific
Sper scientific 850051 User manual
Sper scientific
Sper scientific 850081DOK User manual
Sper scientific
Sper scientific 850070 User manual
Sper scientific
Sper scientific 860032 User manual
Sper scientific
Sper scientific 850048 User manual
Sper scientific
Sper scientific 850068 User manual
Sper scientific
Sper scientific 300037 User manual
Sper scientific
Sper scientific 850001 User manual
