Sper scientific 850004 User manual

1 1

Bluetooth®

Light Meter

850004

Instruction Manual

2 3

TABLE OF CONTENTS

INTRODUCTION..........................................3

PANEL DESCRIPTION................................4

MEASUREMENT PROCEDURES...............5

SELECT LUX/FOOT CANDLES..................5

SELECT MEASURMENT RANGE...............5

BACKLIGHT.................................................6

HOLD FUNCTION........................................6

MAX/MIN FUNCTION...................................6

AUTO POWER OFF.....................................7

BLUETOOTH COMMUNICATIONS.............8

BATTERY REPLACEMENT.......................11

SPECTRAL SENSITIVITY

CHARACTERISTIC....................................11

SPECIFICATIONS......................................12

OPTIONAL ACCESSORIES......................13

WARRANTY...............................................16

2 3

INTRODUCTION

Sper Scientic’s Bluetooth® Light Meter is

small, light, and simple to use with results

displayed on the meter’s large 1-½” backlit

display. Choose readings in lux or foot-can-

dles. Features a bar graph display, minimum

and maximum hold (peak) and data hold

functions. The meter o󰀨ers the convenience

of Bluetooth® for wireless communication

with free iOS and Android Apps. Results can

also be remotely viewed on your smart-

phone in real time, saved and exported. This

enables the meter to be used as a remote

wireless probe and as a datalogger. Comes

ready to use with instructions, tripod screw,

and a 9V battery. N.I.S.T. traceable certi-

cate of compliance available.

4 5

PANEL DESCRIPTION

1. Photo Diode

2. LCD Display

3. HOLD/ button

4. MAX/MIN button

5. Power button

6. Range (Lux/FC) button

7. Bluetooth button

4 5

MEASUREMENT PROCEDURES

1. Turn the meter on/o󰀨 by pressing the

POWER button.

2. Face the photo detector towards the light

source you wish to measure.

SELECT LUX / FOOT CANDLES

Press the red button for 2 seconds to toggle

between Lux and Foot Candle Ranges.

SELECT MEASURMENT RANGE

Press the red button to select auto range or

manual range.

If “OL” (over range) appears on the display,

while in the manual range mode, select high-

er ranges until “OL’ disappears.

6 7

Press the red button repeatedly to choose

from the following measurement ranges:

Lux: 400, >4k, >40k, 400k

FC: 40, >400, 4k

BACKLIGHT

Press for 2 seconds to turn the illuminated

display on/o󰀨.

HOLD FUNCTION

With the meter on, press the HOLD button to

display “HOLD” and the last reading. Press

HOLD again to exit this function.

MAX/MIN FUNCTION

Max/Min readings are continually updated as

soon as you enter the Max/Min mode. These

readings are reset when you exit the Max/ Min

mode, or when the meter is turned o󰀨.

6 7

1. Press the MAX/MIN button once to display

“MAX” and the maximum (peak) recorded

light reading. The display will be updated

only when the max (peak) level is exceeded.

2. Press the MAX/MIN button again to display

“MIN” and the minimum light reading. The

display will be updated only on reaching

lower readings.

3. Press the MAX/MIN button again to exit

Max/Min mode. The current reading is now

displayed and continually updated.

AUTO POWER OFF

1. If no buttons are pushed for about 10 min-

utes, the meter will automatically turn o󰀨.

2. While the meter is on, press the power

button for 2 seconds to override Auto Power

O󰀨: disappears from the display indicat-

ing that Auto Power O󰀨 is disabled.

Note…The meter defaults to Auto Power O󰀨

each time it is turned on.

BLUETOOTH®COMMUNICATION

Download and pairing

1. Download the iOS or Android “Meterbox

Pro” APP to your smartphone.

2. Press the button on the meter to activate

Bluetooth®.

3. Press “Connect Device” on the APP.

4. Now choose “850004” from the device list

that now appears. The meter will immedi-

ately begin displaying a real time graph of

your meter’s readings.

Saving your results

5. To begin recording data press the red

button on screen. You will now be asked to

name and save the le. The data will now

start recording. Press the red button again

to stop recording.

Viewing saved Data

6. Press < at the top of the screen to view

saved data. Next, choose “Files” at the

bottom of the screen, then choose the le

you wish to view. A graph of the entire

record will now appear. Press on the

lower right to see the data including

recording times, maximum, minimum and

average readings.

7. (saved data le graph) enables you to

add notes and photos to your data le.

8. Press at the top of the screen to export

the data for to your computer for further

analysis or storage.

10 11

Settings

Alarms:

1. Select Instrument Type: Environmental

Meter.

2. Press Next then Choose Function and

select your alarm parameter.

3. Insert your Hi and Low alarm values.

4. Repeat steps 3 & 4 for additional alarm

parameters you wish to set for your meter.

5. Use the Alarm switch at the bottom to

enable / disable the alarm for the parameter

shown. Use the Allow Alarm switch at the

top to enable / disable alarms on all

parameters.

Recording: Choose your test sample rate

and duration.

Table of contents

Other Sper scientific Measuring Instrument manuals

Sper scientific

Sper scientific 300068 User manual

Sper scientific

Sper scientific AquaShock 850046K User manual

Sper scientific

Sper scientific AquaShock Bluetooth pH Kit 850057K User manual

Sper scientific

Sper scientific 840087 User manual

Sper scientific

Sper scientific 850068 User manual

Sper scientific

Sper scientific 900019 User manual

Sper scientific

Sper scientific 840022 User manual

Sper scientific

Sper scientific 850023 User manual

Sper scientific

Sper scientific CL-2006 User manual

Sper scientific

Sper scientific 800019 User manual

Sper scientific

Sper scientific 300037 User manual

Sper scientific

Sper scientific 850020 User manual

Sper scientific

Sper scientific 850009 User manual

Sper scientific

Sper scientific 860045 User manual

Sper scientific

Sper scientific 840010 User manual

Sper scientific

Sper scientific 300005 User manual

Sper scientific

Sper scientific 840018 User manual

Sper scientific

Sper scientific 840005 User manual

Sper scientific

Sper scientific 840024 User manual

Sper scientific

Sper scientific 840029 User manual

Sper scientific

Sper scientific 840012 User manual

Sper scientific

Sper scientific 860055 User manual

Sper scientific

Sper scientific 800048 User manual

Sper scientific

Sper scientific 800034 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual