Sage BTM800 User manual

the Tea Maker ™

BTM800 / STM800

EN USER GUIDE

Components

A. Jug lid

B. Stainless steel scale lter

C. Tea basket lid

D. Stainless steel tea basket

E. Jug post

F. Glass jug

G. Immersed temperature sensor

H. Tea scoop

I. Power base

J. Cord storage

Rating Information

220–240V ~ 50-60Hz 1680–2000W

N O QP R

K. AUTO START button

L. KEEP WARM button

M. BASKET button

N. TEA TYPE button

O. Variable temperature control

P. Backlit LCD

Q. Variable time control

R. TEA STRENGTH button

S. HOT WATER / CANCEL button

T. TEA / CANCEL button

Rating Information

220–240V ~ 50-60Hz 1680–2000W

Functions

BEFORE FIRST USE

In order to remove any dust or protective

residues from the manufacturing process,

it is recommended to run a boiling cycle then

discard the water.

1. Unwind the power cord completely and

insert the power plug into a grounded

wall outlet.

2. Press the left ARROW UP

button until the LCD screen

displays 100°C.

3. Press the HOT WATER / Cancel button

to start the cycle.

4. Discard the water.The Tea Maker™

is now ready to use.

USE THE TEA MAKER™

FOR BREWING TEA

1. Fill with desired amount of water. Ensure

you do not ll past the tea maximum mark

(1200mL TEA MAX).

2. Place the basket on a at, dry surface.

Remove basket lid by lifting from the

sides.

3. Use the provided tea scoop to ll the

basket with tea leaves. As a general

guide, use 1 scoop of tea leaves

per cup/250ml of water.

Selecting the tea type

Press the TEA TYPE button and toggle

through until the desired tea.

Selecting the tea strength

The desired tea strength determines the

brew time.

1. Press the TEA STRENGTH button and

toggle through until the desired tea

strength.

2. Press the TEA / Cancel button to start

the tea brewing cycle.

3. Once the selected brew temperature

is reached the assembled basket will

automatically lower into the heated water.

4. Once the basket reaches the bottom of

the glass jug, the LCD screen will indicate

the brewing progress.

5. At the end of the tea brewing cycle,

the basket will automatically rise to

the top of the glass jug.

WARNING

The tea basket is hot to touch after tea is

brewed. Ensure the tea basket handle has

cooled before handling.

Selecting the ‘Keep Warm’ Feature

This feature allows the brewed tea or heated

water to remain warm for up to 60 minutes.

1. Press the KEEP WARM button before,

during or after completion of the tea

brewing or water heating cycle.

2. If the glass jug is removed from the

Power Base, the ‘Keep Warm’ feature will

automatically switch o. You can re-select

the ‘Keep Warm’ feature by pressing the

KEEP WARM button.

Selecting the ‘Basket Cycle’ Feature

This feature continuously auto lifts and lowers

the basket during the tea brewing cycle.

To activate the‘Basket Cycle’ feature, press

the BASKET button once.

USE AS A VARIABLE TEMPERATURE

KETTLE

1. Fill the glass jug with the desired amount

of water.

2. a) To boil water (100°C):

Press the left ARROW UP button

to increase the temperature to 100°C.

b) To heat water to a customised

temperature:

Press the left ARROW UP button

to increase the temperature, or the

left ARROW DOWN button to

decrease the temperature.

3. Press the HOT WATER / Cancel button

to start the cycle.

4. Once the selected temperature is

reached, the tea alert will sound three

times.The LCD screen will automatically

display the‘Time Since Brew’ function.

This function counts up to a maximum of

60 minutes, allowing you to monitor when

the water heating cycle was complete.

It does not activate the heating elements.

CUSTOMISING BREW

TEMPERATURE

Press the left ARROW UP button to

increase the temperature, or the left

ARROW DOWN button to decrease the

temperature.

NOTE

This product is not calibrated for commercial

or scientic use. Temperatures may vary

± 3˚C, which is within range for optimal

brewing for each tea variety.

TEA TYPE

PRESET

BREW TEMP

PRESET

BREW TIME

GREEN

TEA

WHITE

TEA

OOLONG

TEA

HERBAL

TEA

BLACK

TEA

3:00

85˚C80˚C

3:00

90˚C

3:00

100˚C

4:00

100˚C

2:00

CUSTOMISING BREW TIME

Brew time less than 10 minutes

Press the right ARROW UP button to

increase the time, or the right ARROW

DOWN button to decrease the time.

Manual mode-brew times

over 10 minutes

i) Press the right ARROW UP button

to increase the time up to the maximum

10 minutes.

ii) Continue to press the right ARROW

UP button.The LCD screen will display

‘MANUAL LIFT’ and ‘- - : - -‘ on the right

side of the LCD.

iii) Once the Tea Maker™is activated and

the correct water temperature is reached,

the basket will automatically lower.

iv) Once the desired brew time has elapsed,

press and hold the BASKET button for 2

seconds.The basket will rise.

AUTO START FEATURE

1. Press and hold the AUTO START button

for 2 seconds.

2. To set the CURRENT TIME, press the

left ARROW UP button to increase

the time, or the left ARROW DOWN

button to decrease the time in 1 minute

increments.

3. To set the START TIME, press the right

ARROW UP button to increase the

time, or the right ARROW DOWN

button to decrease the time.

4. Once current time and start time are

programmed, press either the ashing

HOT WATER / Cancel or TEA / Cancel

button to select which feature you would

like to start at the programmed time.

5. Ensure that the Tea Maker™is prepared

with:

a) Sucient water in the glass jug and

tea leaves in the basket for the tea

brewing cycle or,

b) Sucient water in the glass jug for the

water heating cycle.

NOTE

Insucient water may discolour your

Tea Maker™base!

NOTE

The ‘Auto Start’ feature can be cancelled

anytime by pressing the AUTO START button.

Care & Cleaning

CLEANING THE GLASS JUG

1. After each use, empty the glass jug. Do

not allow brewed tea to stand overnight.

2. Wipe the interior of the glass jug with

a soft damp sponge or rinse with warm

water.Tea deposits will enhance the

avour of the brewed tea, so if only

using as a Tea Maker™do not wash

with soapy water.

3. Wipe the exterior of the glass jug with

a soft damp cloth to clean.

4. To remove the build-up of tannin,

the astringent chemical constituent of tea,

ll the glass jug with water up to the water

maximum mark (1500mL WATER MAX)

and bring water to boil and allow water

to cool for one minute. Add contents

of tea cleaner packet and allow to stand

for 5 minutes. Empty Tea Maker,

™

rell with fresh water and boil. Repeat

this step again. Empty Tea Maker™

and rinse thoroughly.

5. Dry thoroughly with a soft lint-free cloth

before using.

NOTE

Allow all parts of the Tea Maker™to

cool completely before disassembling

and cleaning.

NOTE

Only the jug lid, tea basket, tea basket lid

and tea scoop are dishwasher safe.

CLEANING THE JUG LID AND

INTEGRATED SCALE FILTER

1. Wash the jug lid in warm soapy water with

a soft sponge, rinse and dry thoroughly.

The integrated scale lter can be cleaned

by placing under running hot water and

rubbing with a cleaning cloth or brush.

2. Alternatively, the jug lid is dishwasher

safe. Position the jug lid vertically so the

scale lter is facing upwards. This will

allow water to drain properly.

3. Let all surfaces dry thoroughly prior

to using.

CLEANING THE TEA BASKET LID,

TEA BASKET AND TEA SCOOP

1. Wash the tea basket lid, tea basket and

tea scoop in warm soapy water with

a soft sponge, rinse and dry thoroughly.

A non-abrasive liquid cleanser or mild

spray solution may be used to avoid

build-up of stains. Apply the cleanser to

the sponge, not the accessory surfaces,

before cleaning.

2. Alternatively, these accessories are

dishwasher safe.

3. Let all surfaces dry thoroughly prior

to using.

CLEANING THE POWER BASE

4. Wipe the power base with a soft

damp sponge.

5. Let all surfaces dry thoroughly prior

to inserting the power plug into

a wall outlet.

DESCALING

Use Sage®“The Descaler” to remove

scale build up.To order visit

www.sageappliances.com

WARNING

Causes skin irritation.Wash hands

thoroughly after handling.Wear protective

gloves/protective clothing/eye protection/face

protection.

1. Empty one sachet (25g) into 1 litre

of warm water, stir to dissolve.

Pour into the tea maker.

2. Leave stand for 5 minutes.

3. After 5 minutes, discard the solution.

4. Rinse the tea maker twice with fresh

clean water.

STORAGE

1. Ensure the Tea Maker™ is switched o,

cleaned and dried before storing.

2. Ensure that the assembled tea basket is

securely attached to the magnetic post

within the glass jug.

3. Ensure that jug lid is securely in place.

4. Wrap the power cord around the power

cord storage under the power base.

5. Stand the Tea Maker™upright on the power

base. Do not store anything on top.

Troubleshooting

PROBLEM POSSIBLE CAUSE

Tea Maker™will

not switch ‘ON’

• Check the power plug is securely inserted into the outlet.

• Insert the power plug into an independent outlet.

• Insert the power plug into a dierent outlet.

• Reset the circuit breaker if necessary.

• For additional safety the Tea Maker™ is tted with a thermal cut out.

In the event of severe overheating, the Tea Maker™will automatically

shut down to prevent further damage.Should this continue,

visit Sage Customer Service at sageappliances.com.

The Tea Maker™

will not work

• Check the glass jug is securely positioned on the power base.

The LCD light has

gone out?

• The Tea Maker™goes into standby mode if not used for 3 minutes.

• To re-activate the Tea Maker™out of standby mode:

- Remove then replace the glass jug from the power base.

- Press any button on the power base except the HOT WATER / Cancel

or TEA / Cancel buttons.The LCD screen will re-illuminate.

I cannot select a

certain function

• Certain features cannot be selected or changed during the heating

or brewing cycle.The LCD screen may temporarily change or a sound

alert may be heard, but no changes to the cycle will be made.

The LCD screen

displays ‘RESET’

• The LCD screen will display a ashing ‘RESET’ when there is a resettable

electronic issue.Remove the plug from the wall outlet, wait 5 seconds,

then plug back in.

• Visit Sage Customer Service at sageappliances.com if the ‘RESET’

message continues.

The LCD screen

displays ‘ERROR’

• The LCD screen will display a ashing ‘ERROR’ when there

is a non-resettable issue with the appliance.Should this occur,

visit the Sage Customer Service at sageappliances.com

Troubleshooting

PROBLEM WHAT TO DO

I would like to have

the Tea Maker™’s

default settings back

• Even when unplugged from the wall outlet, the Tea Maker™

will remember the last setting used for each function.

• To restore the Tea Maker™’s default settings for each function,

simultaneously press and hold AUTO START and KEEP WARM

buttons for 2 seconds.

The ‘BASKET CYCLE’

feature / BASKET

button does

not work

• The basket cycle is only operational during brewing cycles that are

under 10 minutes.

• The tea basket cannot be lowered during the heating up phase

of normal operation.

After boiling

water, bubbles

appear around the

temperature sensor

• This is normal for the functionality of the Tea Maker™.

My tea tastes too

weak or too strong

• Perform a cleaning cycle as per instruction in the booklet.

• Add milk/liquid BEFORE drinking powder is added to the jug.

There is a rattling

noise inside the

glass jug

• This is normal.The noise is from the magnet located inside the

jug post and may be heard when the tea basket is not attached.

STM800 EU UG8 D21

Other manuals for BTM800

Table of contents

Other Sage Kitchen Appliance manuals

Sage

Sage the Risotto Plus BRC600 User manual

Sage

Sage the Risotto Plus SRC600 User manual

Sage

Sage Milk Cafe SMF600 User manual

Sage

Sage Combi Wave BMO870 User manual

Sage

Sage Oracle Touch SES990 User manual

Sage

Sage STM800 User manual

Sage

Sage STM800BSS4EEU1 User manual

Sage

Sage Fast Slow GO BPR680 User manual

Sage

Sage BTM700 User manual

Sage

Sage Citrus Press BCP600 User manual

Sage

Sage Milk Cafe BMF600 User manual

Sage

Sage Milk Cafe SMF600 User manual

Sage

Sage the Adjusta Grill & Press BGR250 User manual

Sage

Sage theMulti Cooker BRC600UK User manual

Sage

Sage Boss To Go Grind & Mill User manual

Sage

Sage Smart Scoop BCI600 User manual

Sage

Sage the Risotto Plus BRC600 User manual

Sage

Sage Fast Slow Pro SPR700 User manual

Sage

Sage Milk Cafe BMF600 User manual

Sage

Sage Puck Sucker SEA503 User manual

Sage

Sage BTM800 User manual

Sage

Sage the Vac Q SBL002 User manual

Sage

Sage the Scraper Mixer Pro BEM800UK User manual

Sage

Sage Fast Slow Pro BPR700 User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions