RS PRO 232.50.100 User manual

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Model 232.50.100 per ATEX

Pressure gauge model 2 per directive 94/9/EC (ATEX)

Druckmessgerät Typ 2 nach Richtlinie 94/9/EG (ATEX)

Manomètre type 2 selon directive 94/9/EG (ATEX)

Manómetro modelo 2 según la directiva 94/9/CE (ATEX)

II 2 GD c TX

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta!

Operating instructions model 2 per ATEX Page 3-16

Betriebsanleitung Typ 2 nach ATEX Seite 17-30

Mode d’emploi type 2 selon ATEX Page 31-44

Manual de instrucciones modelo 2 según ATEX Página 45-58

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX 3

1. General information 4

2. Safety 5

3. Specications 10

4. Design and function 10

5. Transport, packaging and storage 11

6. Commissioning, operation 12

7. Maintenance and cleaning 15

8. Dismounting and disposal 15

Appendix 1: Declaration of conformity for models

232.50, 233.50, 232.30, 233.30, 262.50,

263.50, 262.30, 263.30, 232.36 and

233.36

Contents

Declarations of conformity can be found online at www.wika.com.

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX

1. General information

The pressure gauge described in the operating instructions has

been designed and manufactured using state-of-the-art technology.

All components are subject to stringent quality and environmental

criteria during production. Our management systems are certied to

ISO 9001 and ISO 14001.

These operating instructions contain important information on

handling the pressure gauge. Working safely requires that all safety

instructions and work instructions are observed.

Observe the relevant local accident prevention regulations and

general safety regulations for the instrument‘s range of use.

The operating instructions are part of the product and must be kept

in the immediate vicinity of the instrument and readily accessible to

skilled personnel at any time.

Skilled personnel must have carefully read and understood the

operating instructions, prior to beginning any work.

The manufacturer’s liability is void in the case of any damage

caused by using the product contrary to its intended use,

non-compliance with these operating instructions, assignment of

insuciently qualied skilled personnel or unauthorised modica-

tions to the pressure gauge.

The general terms and conditions, contained in the sales documen-

tation, shall apply.

Subject to technical modications.

1. General information

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX 5

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PM 02.02, PM 02.04 or PM 02.15

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation, which can

result in serious injury or death, if not avoided.

Information

... points out useful tips, recommendations and information

for ecient and trouble-free operation.

WARNING!

... indicates a potentially dangerous situation in the

hazardous area, resulting in serious injury or death, if not

avoided.

2. Safety

WARNING!

Before installation, commissioning and operation, ensure

that the appropriate pressure gauge has been selected in

terms of measuring range, design and specic measuring

conditions.

The compatibility of the materials under pressure with the

medium must be checked!

1. General information / 2. Safety

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX

In order to guarantee the measuring accuracy and

long-term stability specied, the corresponding load limits

must be observed.

Non-observance can result in serious injury and/or

damage to equipment.

Further important safety instructions can be found in the

individual chapters of these operating instructions.

2.1 Intended use

These pressure gauges are used for measuring pressure within

hazardous areas in industrial applications.

The pressure gauge has been designed and built solely for the

intended use described here, and may only be used accordingly.

The manufacturer shall not be liable for claims of any type based on

operation contrary to the intended use.

2.2 Personnel qualication

WARNING!

Risk of injury should qualication be insucient!

Improper handling can result in considerable injury and

damage to equipment.

The activities described in these operating instructions

may only be carried out by skilled personnel who have

the qualications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their

technical training, knowledge of measurement and control technology

and on their experience and knowledge of country-specic regulations,

2. Safety

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX 7

2. Safety

current standards and directives, are capable of carrying out the work

described and independently recognising potential hazards.

2.3 Safety instructions for pressure gauges per ATEX

WARNING!

Non-observance of these instructions and their contents

may result in the loss of explosion protection.

WARNING!

It is imperative that the application conditions and safety

requirements of the EC-type examination certicate are

followed.

Pressure gauges must be earthed via the process

connection!

Specications

Permissible temperatures

Ambient: Model 232/262 -40 ... +60 °C

Model 233/263 -20 ... +60 °C (glycerine lling)

-40 ... +60 °C (silicone oil lling)

Medium: The permissible medium temperature not only depends on

the instrument design, but also on the ignition temperature

of the surrounding gases, vapours or dusts. Both aspects

have to be taken into account.

For maximum permissible medium temperatures see table 1.

Attention! In the case of gaseous substances, the temperature may

increase due to compression warming. In these cases it may be neces-

sary to throttle the rate of change of pressure or reduce the permissible

medium temperature.

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX

Temperature class of the

ambient atmosphere

(ignition temperature)

Maximum permissible medium

temperature (in the measuring system)

Models 232

(dry gauges)

Models 233

(liquid-lled gauges)

T 6 (85 °C < T ≤ 100 °C) +70 °C +70 °C

T 5 (100 °C < T ≤ 135 °C) +85 °C +85 °C

T 4 (135 °C < T ≤ 200 °C) +120 °C +100 °C

T 3 (200 °C < T ≤ 300 °C) +185 °C +100 °C

T 2 (300 °C < T ≤ 450 °C) +200 °C +100 °C

T 1 (T > 450 °C) +200 °C +100 °C

2.4 Special hazards

WARNING!

For hazardous media such as oxygen, acetylene, amma-

ble or toxic gases or liquids, and refrigeration plants,

compressors, etc., in addition to all standard regulations,

the appropriate existing codes or regulations must also be

followed.

For additional important safety instructions see chapter "2.3 Safety

instructions for pressure gauges per ATEX".

WARNING!

Residual media in dismounted pressure gauges can result

in a risk to persons, the environment and equipment.

Take sucient precautionary measures.

Table 1: Permissible medium temperature

2. Safety

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX 9

Year of

manufacture

2.5 Labelling / safety marks

Product label

Explanation of symbols

Before mounting and commissioning the pressure gauge,

ensure you read the operating instructions!

CE, Communauté Européenne

Instruments bearing this mark comply with the relevant

European directives.

ATEX European Explosion Protection Directive

(Atmosphère = AT, explosible = EX)

Instruments bearing this mark comply with the require-

ments of the European Directive 94/9/EC (ATEX) on

explosion protection.

Instruments bearing this mark on the dial are safety

pressure gauges with solid bae wall per EN 837 (S3).

2. Safety

2080268.06 02/2013 GB/D/F/E

WIKA operating instructions pressure gauge, model 2 per ATEX

3. Specications

Pressure limitation

Models 232.50, 233.50, 232.30, 233.30, 262.50, 263.50, 262.30, 263.30:

Steady: full scale value

Fluctuating: 0.9 x full scale value

Short time: 1.3 x full scale value

Models 232.36 and 233.36:

Steady: end value of measuring range

Fluctuating: 0.9 x end value of measuring range

Short time: overload range

Temperature eect

When the temperature of the measuring system deviates from the

reference temperature (+20 °C): max. ±0.4 %/10 K of full scale value

IP Ingress protection

Enclosing case IP 65 (EN 60529/IEC 529)

For further specications see WIKA data sheet PM 02.02, PM 02.04 or

PM 02.15 and the order documentation.

4. Design and function

Description

Nominal size 100 and 160 mm

The instruments measure the pressure by means of resilient

bourdon tube pressure elements

The measuring characteristics are in accordance with the EN 837-1

standard

3. Specications / 4. Design and function

This manual suits for next models

Table of contents

Languages:

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual