RS PRO RS-5200 User manual

Instruction Manual

RS-5200

146-4657

PARTICLE MASS COUNTER

FREN IT

PARTICLE MASS COUNTER / EN

09/15/17 Version No. 00

CONTENTS

Title Page

1. SAFETY INFORMATION...................................................................................1

2. GENERAL INFORMATION ...............................................................................2

3. SPECIFICATIONS.............................................................................................3

4. QUICK START...................................................................................................5

5. CONTROLS AND FUNCTIONS........................................................................6

6. DISPLAY............................................................................................................7

6-1 Main Screen..................................................................................................7

6-2 Setup Screen................................................................................................8

6-3 Label Menu Screen.....................................................................................10

7. USING THE METER........................................................................................13

7-1 Setup ..........................................................................................................13

7-2 Counter Operation......................................................................................19

8. MAINTENANCE...............................................................................................24

8-1 Cleaning the Case......................................................................................24

8-2 Charging the Battery and Using the AC Adapter........................................24

8-3 Purging the Meter Sensor...........................................................................25

PARTICLE MASS COUNTER / EN

09/15/17 Version No. 00 1

1. SAFETY INFORMATION

A Warning identifies a condition or action that pose hazard(s) to the user; a

Caution identifies a condition or action that may damage the meter or the

equipment under test.

Read this entire manual before using the meter.

Safety labels used in this manual and on the meter are as follows.

Precautionary labels

Label Meaning

Risk of Danger. Important information. Refer to manual.

Hazardous voltage. Risk of electrical shock.

Do not dispose of this product as unsorted municipal waste.

Conforms to relevant European Union directives.

Warning

To avoid electric shock, injury, or damage to the meter, follow these

safety guidelines:

Use the meter only as described in this Instruction Manual, otherwise

the protection provided by the meter may be impaired.

Do not use the meter in explosive atmospheres.

The meter contains no user-serviceable parts. Do not open the meter.

Have the meter serviced only by qualified service personnel.

Inspect the meter before use.

Do not use it if it appears damaged.

Always use the ac adapter/charger and connector appropriate for the

voltage and outlet of the country or location in which you are

working.

PARTICLE MASS COUNTER / EN

2 09/15/17 Version No. 00

Caution

To avoid possible damage to the meter:

Avoid using the meter in an excessively dirtyor dustyatmosphere.

Excessive particle intake can damage the meter.

Remove the isokinetic probe cap before the startup. Not doing so can

damage the meter.

Do not use a wrench to connect or disconnect the isokinetic probe.

Finger-Tighten the connection.

2. GENERAL INFORMATION

Note

When using the meter for the first time, or when reusing the unit after

an interval of a month or longer, be sure to charge the battery for at

least 20 minutes before turning on the power.

Warning

Read “Safety Information” before using the meter.

The meter is a full featured, battery operated, handheld particle counter or mass

monitor. In the count mode the meter will measure particle counts at fixed sizes

of 0.5 µm, 0.7 µm, 1.0 µm, 2.5 µm, 4.0 µm, 5.0 µm, 7.0 µm and 10.0 µm. In the

mass mode the meter will measure PM1, PM2.5, PM4, PM7, PM10 and TSP

mass concentration levels. It holds 500 samples in flash memory and records

the date, time, counts or mass, sample volume, temperature, and relative

humidity of each sample. The data can be easily downloaded to a personal

computer using the USB interface cable.

The meter is commonly used for the following:

HVAC Applications

Controlled Environments

Filter Testing

Indoor Air Quality

Mining & Ore Processing

Hospitals & Clinics

Emission Sourcing

Monitoring Growning Rooms

PARTICLE MASS COUNTER / EN

09/15/17 Version No. 00 3

3. SPECIFICATIONS

Operating principle: Counts individual particles using scattered laser light and

calculates the equivalent mass concentration using a

proper algorithm.

Optical system: Sideway light-scattering method

Light source: Laser diode

Laser product class: Class 1, IEC 60825-1 / EN 60825-1

Mass Mode:

Mass concentration ranges: PM1, PM2.5, PM4, PM7, PM10, and TSP

Concentration range: 0 to 1000 µg/m

Sample time: 1 minute (2.83 L / min)

Count Mode:

Particle size: 0.5 µm, 0.7 µm, 1.0 µm, 2.5 µm, 4.0 µm, 5.0 µm, 7.0 µm, 10 µm

Accuracy: ±10% to calibration aerosol.

Sensitivity: 0.5 µm

Sample flow rate: 2.83 L / min

Maximum particle concentration: 70000 particles / L (coincidence loss max.

5%)

Sample time: 6 s. (0.01 CF), 21 s. (1L), 1 min. (0.1 CF, 2.83L),

3 min. 32 s (10L), 10 min. (1 CF, 28.3L), any length (MANUAL),

any length (1 s. to 59 min. 59 s.)

Relative humidity: ± 7 %, 20 % RH to 90 % RH, non-condensing

Temperature: ± 3 °C, 10 °C to 40 °C (50 °F to 104 °F)

Data storage (Flash memory): 500 sample records (rotating buffer) in Mass

mode.

500 sample records (rotating buffer) in Count

mode.

Data recorded: Date, time, counts or mass, relative humidity, temperature, sample

volumes, alarms, label

Display: TFT color display with backlight

Count modes: Concentration, totalize, audio

PARTICLE MASS COUNTER / EN

4 09/15/17 Version No. 00

Delay time: 0 to 24 hours

Sample inlet: Isokinetic probe

Interface: USB

Vacuum source: Internal pump flow controlled

Dimensions: 11.0 x 21.8 x 6.7 cm (4.33 " x 8.58 " x 2.64 ")

Weight: 875 g

Environmental:

Operating: 10 °C to 40 °C (50 °F to 104 °F), 20 % to 90 % RH, non-condensing

Storage: -10 °C to 50 °C (14 °F to 122 °F), Up to 90 % RH, non-condensing

Power: AC Adapter, 12 VDC at 3 A, 100 to 240 VAC, 50 to 60 Hz

Rechargeable Battery: Lithium ion, 8.4 V at 2.5 Ah; replaceable

Charge time: 2.5 hours (Fast Charge mode), 27 hours (Trickle Charge mode)

Continuous Operating Time: 4 hours

Standards: Complies with CE, JIS B9921: 1997, ISO 21501-4

Accessories: Instruction manual, AC adapter, Power cord, USB cable, Zero count

filter, Hard-shell carrying case.

PARTICLE MASS COUNTER / EN

09/15/17 Version No. 00 5

4. QUICK START

The meter may be used directly out of the box.

To immediately use the meter:

1. Read “Safety Information”

2. Remove the Isokinetic probe cap.

3. Press the (POWER) key.

4. Press



key to select MASS mode or Press



key to select COUNT

mode.

5. Press

(COUNT) key to start sampling.

Be sure to read this entire manual for more detailed information.

PARTICLE MASS COUNTER / EN

6 09/15/17 Version No. 00

5. CONTROLS AND FUNCTIONS

Parts description:

1. Isokinetic probe and cap.

2. External power: 12 VDC, 3 A External power.

3. USB Port.

4. Power key: Press to turns the meter on and off.





Arrow keys:

Press



key to select MASS mode or press



key to select COUNT

mode.

Press to scroll within the selected screen.

6. Return key: Press to store the setup changes and to return to the main

screen.

Function keys: Each function key corresponds to a name

above each function key. Different menus

have different labels above the keys.

PARTICLE MASS COUNTER / EN

09/15/17 Version No. 00 7

6. DISPLAY

Press the corresponding button from the keypad at the bottom of the LCD to

invoke the following screens:

Main screen

Setup screen (pages 1, 2 and 3)

Label menu screen

6-1 Main Screen

The Main screen appears after the meter is turned on and after the opening

screen appears.

The Main screen includes:

Six mass ranges and corresponding concentration values. (MASS Mode)

Eight channel sizes and corresponding counts. (COUNT Mode)

Battery-charge indicator (amount of charge remaining in the battery).

Sample location name.

Time indicator (represents time to complete).

Delay time.

Sampled volume indicator.

Number of samples.

Sample air temperature (°C or °F).

Sample air relative humidity (%RH).

Particle count mode.

The parameters on the Main screen are selected by using the Setup screens

and the Label setup menu.

PARTICLE MASS COUNTER / EN

8 09/15/17 Version No. 00

6-2 Setup Screen

1. From the Main screen, press

(SETUP) key, the Setup screen Page 1

appears.

Press

key again to select the desired setup screen pages.

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual