Panasonic FP7 Series User manual
Introduction
Thank you for buying a Panasonic product. Before you use the product, please carefully read
the installation instructions and the users manual, and understand their contents in detail to
use the product properly.
Types of Manual
There are different types of users manual for the FP7 series, as listed below. Please refer
to a relevant manual for the unit and purpose of your use.
The manuals can be downloaded on our website.
Unit name or purpose of
use Manual name Manual code
FP7 Power Supply Unit FP7 CPU Unit Users Manual (Hardware) WUME-FP7CPUH
FP7 CPU Unit Command Reference Manual WUME-FP7CPUPGR
FP7 CPU Unit Users Manual
(Logging Trace Function) WUME-FP7CPULOG
FP7 CPU Unit
FP7 CPU Unit Users Manual (Security Function) WUME-FP7CPUSEC
Instructions for Built-in
LAN Port FP7 CPU Unit Users Manual
(LAN Port Communication) WUME-FP7LAN
Instructions for Built-in
COM Port
FP7 Extension Cassette
(Communication)
(RS-232C/RS485 type)
FP7 series Users Manual (SCU communication) WUME-FP7COM
FP7 Extension Cassette
(Communication)
(Ethernet type)
FP7 series Users Manual (Communication
cassette Ethernet type) WUME-FP7CCET
FP7 Extension (Function)
Cassette
Analog Cassette FP7 Analog Cassette Users Manual WUME-FP7FCA
(Upcoming)
FP7 Digital Input/Output Unit FP7 Digital Input/Output Unit Users Manual WUME-FP7DIO
FP7 Analog Input Unit FP7 Analog Input Unit Users Manual WUME-FP7AIH
FP7 Analog Output Unit FP7 Analog Output Unit Users Manual WUME-FP7AOH
FP7 High-speed counter Unit FP7 High-speed counter Unit Users Manual WUME-FP7HSC
FP7 Pulse Output Unit FP7 Pulse Output Unit Users Manual WUME-FP7PG
(Upcoming)
FP7 Positioning Unit FP7 Positioning Unit Users Manual WUME-FP7POSP
FP7 Serial Communication
Unit FP7 series Users Manual (SCU communication) WUME-FP7COM
PHLS System PHLS System Users Manual WUME-PHLS
Programming Software
FPWIN GR7 FPWIN GR7 Introduction Guidance WUME-FPWINGR7
Table of Contents
ii
Table of Contents
1. Overview of Functions........................................................1-1
1.1 For Using Logging and Trace Functions................................................ 1-2
1.1.1 Precautions on Using Logging Function .................................................1-2
1.1.2 Selection of SD Memory Cards...............................................................1-3
1.2 Overview of Functions............................................................................ 1-4
1.2.1 Overview of Logging Function.................................................................1-4
1.2.2 Overview of Trace Function ....................................................................1-6
1.3 Format of Saved Files............................................................................ 1-8
1.3.1 File Format (For Logging Function).........................................................1-8
1.3.2 File Name (For Logging Function) ..........................................................1-8
1.3.3 File Format (For Trace Function) ............................................................1-9
1.3.4 File Name (For Trace Function)..............................................................1-9
1.4 Data Format ......................................................................................... 1-10
2. Configuration.......................................................................2-1
2.1 Definition of Buffer Memory.................................................................... 2-2
2.1.1 Setting Method........................................................................................2-2
2.2 Logging Information Setting ................................................................... 2-4
2.2.1 Confirmation and Settings of File Information.........................................2-4
2.2.2 LOG FIle Setting Items (For Logging).....................................................2-6
2.3 Trace Information Setting....................................................................... 2-8
2.3.1 Confirmation and Settings of File Information.........................................2-8
2.3.2 LOG FIle Setting Items (For Trace).......................................................2-10
2.4 Registration of Device Information....................................................... 2-12
Table of Contents
2.5 Operation When Setting Cycle for Logging Trigger..............................2-14
2.6 Downloading Setting Data to CPU Unit................................................2-15
2.6.1 Downloading to Execution Memory RAM/ROM1..................................2-15
2.6.2 Copying from SD Memory Card to Execution Memory RAM/ROM1 ....2-15
2.6.3 Saving to SD Memory Card (In SD Memory Card Operation)..............2-16
2.7 Precautions on Downloading Setting Data...........................................2-17
2.7.1 Storage of Setting Data.........................................................................2-17
2.7.2 Project Data Consistency......................................................................2-17
2.7.3 Autostart Setting....................................................................................2-17
3. Start-Stop and Monitor........................................................3-1
3.1 Start and Stop of Logging/Trace Operation............................................3-2
3.1.1 Start and Stop with Tool Software...........................................................3-2
3.1.2 Start and Stop with Instructions ..............................................................3-3
3.1.3 Autostart by Setting.................................................................................3-3
3.2 Operation Check Using Logging/Trace Monitor......................................3-4
3.2.1 Logging/Trace Monitor............................................................................3-4
3.2.2 System Relays Relating to Logging/Trace Operation.............................3-5
3.2.3 System Data Registers Relating to Logging/Trace Operation................3-6
3.2.4 Checking Logging Speed (When Selecting Logging For Application)....3-6
3.3 Operation Check Using System Monitor.................................................3-7
3.3.1 Monitoring Method of System Monitor Area (SM)...................................3-7
3.3.2 List of System Monitor Area (SM)...........................................................3-7
4. Logging Operation ..............................................................4-1
4.1 Flow of Logging Operation......................................................................4-2
4.1.1 Operation Flow........................................................................................4-2
4.2 Operation When Logging is Selected for Application .............................4-4
4.2.1 Operation When Logging Operation Starts.............................................4-4
Table of Contents
iv
4.2.2 Operation When Logging Operation Stops.............................................4-4
4.2.3 Operation When Power Supply Turns Off...............................................4-4
4.2.4 Operation When the Card Cover of CPU Unit Opens.............................4-5
4.2.5 Operation When the Number of Determination Files Reaches the
Maximum Number of Generations..........................................................4-6
4.3 System Management Information Relating to Logging Function............ 4-7
4.3.1 System Management Information and Operation...................................4-7
4.3.2 Clearing Management Information..........................................................4-7
5. Trace Operation and Time Chart .......................................5-1
5.1 Flow of Trace Operation......................................................................... 5-2
5.1.1 Operation Flow........................................................................................5-2
5.2 Operation When Trace is Selected for Application................................. 5-4
5.2.1 Operation When Trace Operation Starts.................................................5-4
5.2.2 Operation When Logging Operation Stops.............................................5-4
5.2.3 Operation When Power Supply Turns Off...............................................5-4
5.2.4 Operation When the Card Cover of CPU Unit Opens.............................5-5
5.3 Trace Monitor (Time Chart).................................................................... 5-6
5.3.1 Display Method of Time Chart.................................................................5-6
5.3.2 Explanation of Time Chart Monitor..........................................................5-8
5.3.3 Restrictions on Time Chart Monitor.......................................................5-10
6. Troubleshooting..................................................................6-1
6.1 Operations When Errors Occur.............................................................. 6-2
6.1.1 Operation When Power Supply Turns Off...............................................6-2
6.1.2 Operation When Errors Occur (Only When Selecting Logging for
Application)..............................................................................................6-2
6.1.3 Operations When Inserting/Removing SD Memory Card During
Logging/Trace .........................................................................................6-3
6.2 Troubleshooting...................................................................................... 6-4
6.2.1 Errors When Start/Stop Operation was Executed Using FPWIN GR7 ...6-4
Table of Contents
6.2.2 Errors When Operation was Executed Using LOGST, LOGED or SMPL
Instruction................................................................................................6-4
6.2.3 Error of Logging/Trace............................................................................6-5
6.2.4 Error When Copying SD Memory Card...................................................6-5
Table of Contents
vi
1
Overview of Functions
Overview of Functions
1-2
1.1 For Using Logging and Trace Functions
1.1.1 Precautions on Using Logging Function
As an SD memory card is used for the logging function, there are risks of loss of data or data
damage depending on usage conditions. Consider possible risks, design a system and make
an evaluation of the system before using the function.
Precautions when powering off the PLC
If the PLC is powered off during logging or accessing an SD memory card, the following
problems may occur.
Data accumulated in the buffer memory are lost.
Files are damaged.
The SD memory card is damaged.
Take necessary measures such as the use of an uninterruptible power system (UPS) as
necessary.
Logging speed and writing speed into an SD memory card
When the speed accumulating data is faster than the writing speed into an SD memory card,
data cannot be saved. Make an evaluation thoroughly before use.
Other manuals for FP7 Series
26
Table of contents
Other Panasonic Controllers manuals
Panasonic
Panasonic WV-CU980/G User manual
Panasonic
Panasonic FP0R Series User manual
Panasonic
Panasonic FP0H Series User manual
Panasonic
Panasonic CZ-64ESMC3 User manual
Panasonic
Panasonic FP7 Series User manual
Panasonic
Panasonic MN103001G/F01K User manual
Panasonic
Panasonic SFB-HC User manual
Panasonic
Panasonic FP Series User manual
Panasonic
Panasonic CZ-ANC3 User manual
Panasonic
Panasonic SL-VGU1-C User manual
Panasonic
Panasonic CZ-ANC2 User manual
Panasonic
Panasonic AWRP605 - CCU & PAN/TILT CONTR User manual
Panasonic
Panasonic AK-HRP1015 Use and care manual
Panasonic
Panasonic CZ-TACG1 User manual
Panasonic
Panasonic FP Series Owner's manual
Panasonic
Panasonic FPG Series User manual
Panasonic
Panasonic AFP7PSA1 User manual
Panasonic
Panasonic FP7 Series User manual
Panasonic
Panasonic AWRP655N - MULTI FUNCTION CONTROLLER User manual
Panasonic
Panasonic FP7 Series User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
