Panasonic AK-HRP1015 Use and care manual

AK-HRP1015 Firmware Update Procedure / Mar.2021

Page1/4

Panasonic Corporation

AK-HRP1015 Firmware update procedure

1. Version display method

1-1

Each software version can be confirmed at item “SOFT VERSION” and “FPGA VERSION” in ROP SETTING menu.

1. Supply the power to AK-HRP1015 by connecting to AK-UC4000/UC3000/HC5000, AK-UCU600/UCU500, or PoE

HUB.

2. Press the SETUP button. The TOP menu screen of ROP menu appears.

3. Select “ROP SETTING”by pressing the Function △▽button.

4. Press the EXEC button to open the ROP SETTING menu.

5. When pressing the Function △▽button, SYSTEM version and each Software version can be confirmed.

SETUP button

Function button

MENU 7 / 8

37 ROP SETTING

38 CONNECT SETTING

39 ROP IP SETTING

40 CAMERA IP SETTING

41 SD CARD STORE

42 SD CARD LOAD

EXEC button

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

NO? NO? NO?

SYSTEM VERSION 1.00-00-0.00

ROP SETTING 6 / 6

SOFT VERSION 1.00-0000.00

FPGA VERSION 1.00-00-0.00

AK-HRP1015 Firmware Update Procedure / Mar.2021

Page2/4

Panasonic Corporation

1-2. Preparation

CAUTION : Before Updating Software

Do not power down or pull card while upgrading. If the program quits during loading, the data will be erased or

part writing condition and the restart is not made.

< Preparation for SD memory card >

1. One piece of SD memory cards (SD, SDHC or SDXC memory card) is required. Use only SD memory cards

that comply with the SD, SDHC or SDXC specifications.

2. Insert an SD memory card into the card slot of this unit and format it.

NOTE: SD memory card used in this unit requires to be conformed to SDTM standards. Be sure to format SD memory

card on this unit.

< Copy the update file >

1. Accept the software usage agreement and download the update file data “DV91000****.zip” for the AK-

HRP1015 firmware from the following support web site.

https://pro-av.panasonic.net/en/ Support / PASS(Service Support website)

2. Copy the file “DV91000****.zip”to hard disk of your PC and extract the file.

3. Insert the formatted SD memory card into the PC’s card slot.

Then copy the extracted update folder “P R I VAT E ”to the root directory (*1) of the card.

Folder: PRIVATE\MEIGROUP\PAVCN\SBG\SYSCAM\FW\HRP1015*

(*1) : Root directory = top-level directory (i.e., it is not a folder) of the file structure

AK-HRP1015 Firmware Update Procedure / Mar.2021

Page3/4

Panasonic Corporation

2. Update procedure

1. Insert the SD memory card into the SD memory card slot.

2. Supply the power to AK-HRP1015 by connecting to AK-UC4000/UC3000/HC5000, AK-UCU600/UCU500, or PoE

HUB.

3. Press the SETUP button. The TOP menu screen of ROP menu appears.

4. Select “ROP SETTING”by pressing the Function △▽button.

5. Press the EXEC button to open the ROP SETTING menu.

6. Select “UPGRADE”by pressing the Function △▽button.

7. Select “YES”by turning the MENU dial A, and press the MENU dial A. Confirm dialog appears.

▽Function button

MENU dial A

MENU dial B

MENU dial C

SETUP button

EXEC button

△Function button

MENU 7 / 8

37 ROP SETTING

38 CONNECT SETTING

39 ROP IP SETTING

40 CAMERA IP SETTING

41 SD CARD STORE

42 SD CARD LOAD

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

NO? NO? NO?

SYSTEM VERSION 1.00-00-0.00

Turn

dial A

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

YES? NO? NO?

SYSTEM VERSION 1.00-00-0.00

Press MENU dial A

AK-HRP1015 Firmware Update Procedure / Mar.2021

Page4/4

Panasonic Corporation

8. When pressing the MENU dial C, the update will start.

NOTE: Pressing the MENU dial B while “No (EXIT)”is selected, the update will be cancel.

Software update takes approx. 3min. Do not power down while updating.

9. When the update is completed, the message “COMPLETE”is displayed.

10. When pressing the MENU dial C, ROP will reboot automatically. After reboot, confirm that the version number

is renewed for your confirmation update was correctly done follow the item “ Version display method”.

3. Confirm the version number is renewed

Follow the procedure of “Step1”, confirm the version number is renewed.

If it succeeded to update, the update file in the SD memory card is not need anymore.

If the version update fails, turn the power to ON again after inserting SD card in which the update file is saved.

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

NO? NO? NO?

SYSTEM VERSION 1.00-00-0.00

Confirm

Do you upgrade it?

( ENC2 )

Yes

( ENC3 )

Press

dial C

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

NO? NO? NO?

SYSTEM VERSION 1.00-00-0.00

Confirm

Do you upgrade it?

( EXIT )

Yes

( ENC3 )

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

NO? NO? NO?

SYSTEM VERSION 1.00-00-0.00

Information

ROP Upgrading…

NOT REMOVE CARD

ROP SETTING 5 / 6

IRIS CALIBRATION

UPGRADE TOP BOTTOM

NO? NO? NO?

SYSTEM VERSION 1.00-00-0.00

Information

COMPLETE

Push OK to reboot system.

Yes

( ENC3 )

Wait 3 minutes.

Reboot

Press MENU dial C

Table of contents

Other Panasonic Controllers manuals

Panasonic

Panasonic FP2 Series User manual

Panasonic

Panasonic FP-I4C User manual

Panasonic

Panasonic AFPXHEAD4 User manual

Panasonic

Panasonic MGSDB2 Series User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic WVCU161C - SYSTEM CONTROLLER User manual

Panasonic

Panasonic WV-CU980/G User manual

Panasonic

Panasonic CZ-ANC3 User manual

Panasonic

Panasonic CZ-64ESMC2 User manual

Panasonic

Panasonic FP0-A21 User manual

Panasonic

Panasonic EYFLA7AR Operating instructions

Panasonic

Panasonic AFPX-COM5 User manual

Panasonic

Panasonic CZ-RWS3 User manual

Panasonic

Panasonic PAW-PACR3 User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic MINAS A5 Series User manual

Panasonic

Panasonic CZ-RD516C-1 User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic WVCU950 - CONTROLLER - ADDENDUM User manual

Panasonic

Panasonic AG-A850 User manual

Panasonic

Panasonic ACXF60-03410 User manual

Panasonic

Panasonic AF7CPS Series User manual

Panasonic

Panasonic Minas A4 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide

KUHN

KUHN TKS user manual