Panasonic FP Series User manual

Programmable Controller

FP0 RTD Unit

Technical Manual

BEFORE BEGINNING

Liability and Copyright for the Hardware

This manual and everything described in it are copyrighted. You may not copy this manual, in

whole or part, without written consent of Panasonic Electric Works Europe AG.

Panasonic Electric Works Europe AG pursues a policy of continuous improvement of the

design and performance of its products, therefore, we reserve the right to change the

manual/product without notice. In no event will Panasonic Electric Works Europe AG be liable

for direct, special, incidental, or consequential damage resulting from any defect in the

product or its documentation, even if advised of the possibility of such damages.

We invite your comments on this manual. Please email us at:

tech-doc@eu.pewg.panasonic.com.

Please direct support matters and technical questions to your local Panasonic representative.

LIMITED WARRANTY

If physical defects caused by distribution are found, Panasonic Electric Works Europe AG will

replace/repair the product free of charge. Exceptions include:

•When physical defects are due to different usage/treatment of the product other than

described in the manual.

•When physical defects are due to defective equipment other than the distributed

product.

•When physical defects are due to modifications/repairs by someone other than

Panasonic Electric Works Europe AG.

•When physical defects are due to natural disasters.

©MS-DOS and Windows are registered trademarks of Microsoft Corporation.

©IBM Personal Computer AT is registered trademark of the International Business Machines Corporation.

Important Symbols

One or more of the following symbols may be used in this manual:

WARNING

The warning triangle indicates especially important safety instructions. If they are not

adhered to, the results could be:

•fatal or critical injury and/or

•significant damage to instruments or their contents, e.g. data

NOTE

Contains important additional information.

EXAMPLE

Contains an illustrative example of the previous text section.

PROCEDURE

Indicates that a step-by-step procedure follows.

REFERENCE

Indicates where you can find additional information on the subject at hand.

iii

CAUTION

Indicates that you should proceed with caution.

KEY POINTS

Summarizes key points in a concise manner.

SHORTCUTS

Provides helpful keyboard shortcuts.

EXPLANATION

Provides brief explanation of a function, e.g. why or when you should use it.

Table of Contents

FP0 RTD Unit

Table of Contents

BEFORE BEGINNING ......................................................................................i

LIMITED WARRANTY ......................................................................................i

Important Symbols .........................................................................................ii

Precautions Before Use ...............................................................................vii

1Unit Outline.............................................................................................1

1.1 Functions ........................................................................................................... 1

1.2 Product Number ................................................................................................. 1

1.3 Expansion Limit.................................................................................................. 1

1.4 Part Names and Functions ................................................................................. 2

2Input Range Setting Switch...................................................................4

3Wiring......................................................................................................5

4Conversion Characteristics ..................................................................6

4.1 Pt100 ................................................................................................................. 6

4.2 Pt1000 ............................................................................................................... 8

4.3 Ni1000 ............................................................................................................. 10

4.4 Resistor............................................................................................................ 12

5I/O Allocation and Sample Programs .................................................14

5.1 I/O Numbers..................................................................................................... 14

5.2 Programming with FPWIN Pro.......................................................................... 16

5.3 Programming with FPWIN GR .......................................................................... 17

5.3.1 RTD Types Pt100, Pt1000, Ni1000 ....................................................... 17

5.3.2 RTD Type Resistor ............................................................................... 18

Table of Contents

FP0 RTD Unit

6When an Error Occurs .........................................................................20

6.1 Troubleshooting ............................................................................................... 20

6.2 Digital Value When Out Of Measuring Range ................................................... 20

7Specifications.......................................................................................21

8Dimensions...........................................................................................24

Index ..............................................................................................................25

Record of Changes.......................................................................................27

Precautions Before Use

FP0 RTD Unitnit

vii

Precautions Before Use

Accuracy

When extremely sensitive temperature data is required, use the temperature data obtained 15

minutes after turning ON the FP0 RTD unit. (The temperature data obtained in the first 15

minutes is, however, within the total accuracy range.)

A rapid temperature change in the FP0 RTD unit might change the temperature data

temporarily.

A draft (air) created e.g. by a cooling fan built into the control panel and blowing on the FP0

RTD unit will lower accuracy. Avoid any kind of draft.

Programming

Between power ON and the first valid conversion data, the digital value will be 8191 or 16383.

When programming, be sure not to use the data obtained during this period.

When the RTD is broken, the digital value will change to 8191 or 16383. When programming

avoid any risks resulting from a broken RTD. A broken RTD needs to be replaced.

FP0 RTD Unit

Unit Outline

1 Unit Outline

1.1 Functions

RTD input unit for the FP0/FPΣcontrol unit.

The temperature data obtained using the RTD (Resistance Temperature Detector) is

converted to the digital value to be read into the FP0/ FPΣcontrol unit.

Available RTD types

Pt100 (to IEC751), Pt1000 (to IEC751), Ni1000 (to DIN43760), and Resistor.

Temperature measurement ranges available

°C °FRTD

Type Resolution 0.1K Resolution 0.01K Resolution 0.1°F Resolution 0.01°F

Pt100 -200.0 … +500.0 -80.00 … +80.00 -328.0 … +800.0 -80.00 … +80.00

Pt1000 -200.0 … +300.0 -80.00 … +80.00 -328.0 … +572.0 -80.00 … +80.00

Ni1000 -30.0 … +150.0 -30.00 … +80.00 -22.0 … +302.0 -22.00 … +80.00

Resistor measurement ranges available

ΩRTD

Type Resolution 1 ΩResolution 0.1 Ω

Resistor 20 … +2200 20.0 … 1630.0

Conversion to degrees Celsius or degrees Fahrenheit possible

The temperature data measured using the sensor is converted to degrees Celsius or degrees

Fahrenheit inside the FP0 RTD unit.

Broken-RTD detector attached

A broken RTD can be detected.

1.2 Product Number

Product name RTD input points Product number Part number

FP0 RTD unit 6 points FP0RTD6 AFP0430

1.3 Expansion Limit

Number

Up to 3 expansion units can be connected to the control unit.

Position

Always install the FP0 RTD unit the farthest to the right of the control unit.

Other manuals for FP Series

This manual suits for next models

Table of contents

Other Panasonic Controllers manuals

Panasonic

Panasonic CZ-256ESMC2 User manual

Panasonic

Panasonic EYFR03 User manual

Panasonic

Panasonic AG-A850 User manual

Panasonic

Panasonic WVCU161C - SYSTEM CONTROLLER User manual

Panasonic

Panasonic DPC-100 Series User manual

Panasonic

Panasonic FP (Sigma) User manual

Panasonic

Panasonic KT4R Use and care manual

Panasonic

Panasonic AFP7X16DW User manual

Panasonic

Panasonic CZ-256ESMC2 User manual

Panasonic

Panasonic FP2 -C1A User manual

Panasonic

Panasonic AFP7MC16EC User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic FP2 Series User manual

Panasonic

Panasonic FP2 ET-LAN User manual

Panasonic

Panasonic MINAS S-series User manual

Panasonic

Panasonic SFC-HC User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic AWRP655N - MULTI FUNCTION CONTROLLER User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic FP-E Owner's manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic CZ-ANC2 User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic CZ-RD516C-1 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide

KUHN

KUHN TKS user manual