Optika INSPECTION SYSTEMS Series User manual

INSPECTION SYSTEMS Series

Version: 1

Issued: 1.0.0

INSTRUCTION MANUAL

Model

Pag. 2

IS-01

Compact Inspection Video Microscope

INSTRUCTIONS

This instruction manual is for the operation guide, troubleshooting and maintenance to IS-01 compact

Inspection Video Microscope. Please study this manual thoroughly before operating, and keep it with the

instrument. The manufacturer reserves the rights to the modifications by technology development.

On the basis of operation ensured, technical specifications may be subject to changes without notice

Pag. 3

Contents

Hardware

1. Getting Ready 4

1.1 Operation 4

1.2 Maintenance 4

1.3 Components 5

2. Assembling 7

2.1 Assembling Scheme 7

2.2 Assembling Steps 8

3. How to Use 11

3.1 Adjust the Focusing Tension 11

3.2 Set Illumination 11

3.3 Place the Specimen 12

3.4 Adjust the Focus 12

3.5 Lock the Magnification 12

3.6 Use the Button and Interface 13

4. Troubleshooting 14

5. Optical Data 15

Software

6. Overview 16

6.1 Software Start and Quit 16

6.1.1 Software Start 16

6.1.2 Software Quit 16

6.2 Main Commands 17

6.2.1 Command introduction 17

6.2.2 Command’s icon introduction 17

7. Operation Instructions 19

7.1 Local browse 19

7.2 Colour and exposure adjustment 19

7.2.1 Exposure Adjustment 20

7.2.2 Colour Adjustment 20

7.3 Calibration 20

7.4 Drawing mark tool 25

7.5 AWB (Automatic White Balance) 26

7.6 WDR Function 26

7.7 Setting Button 27

7.8 Image real-time transmission 28

7.8.1 WiFi transmission 28

7.8.2 USB Transmission 30

7.9 Image / Video Switch 31

7.9.1 Image function 31

7.9.2 Video Function 31

7.10 Zoom Picture 32

8 Troubleshooting 33

Pag. 4

1 Getting Ready

1.1 Operation

1) Do not expose the microscope in the sun directly. The microscope ought to be placed where is dry and

clean. Avoid high temperature and violent vibration.

2) As the microscope is a high precision instrument, always operate it with care, and avoid physical shock or

crash during the transportation.

3) To keep the image clear, please do not leave fingerprints or stains on the surfaces of lens.

4) Never rotate the left and right focusing knobs in reverse direction; otherwise the microscope will be

damaged.

1.2 Maintenance

1) Keep all the surface of the lens clean. Wipe the lens gently with a soft lens tissue or blow away the dust.

Carefully wipe off oil or fingerprints on the lens surfaces with tissue moistened with a little of 3:7 mixture of

alcohol and ether.

2) Do not use organic solution to wipe the surface of other components, especially the surface of plastic

components. Please use the neutral detergent if necessary.

3) Never disassemble the microscope yourself, otherwise it will influence its function or damage it.

4) After using, cover the microscope with a dust cover to prevent it from the dust, and store it in a place free

from moisture to avoid rusting.

To keep the performance of the microscope, please check it periodically. For more details, please contact the

agents nearby.

Pag. 5

1.3 Components

Display

HDMI connector

MINI connector

USB connector

Video button

Image button

Power switch

Microscope

body

Magnification

changer

LED

ringlight

Microscope

stand

Coarse focus

knob

LED light

adjustment

knobs

Pag. 6

SD card slot

Power

supply

input

Lock for

magnification

changer

Pag. 7

2. Assembling

2-1 Assembling Scheme

Below is the Assembling Scheme to describe how to assemble the components, and the numbers denote the

assembling order.

Before assembling, make sure there is no dust, dirt or other materials which will disturb it.

Assemble carefully and do not scrap any part or touch the glass surface.

Preserve the hexagon spanner, and it will be used when changing the parts.

Pag. 8

2.2 Assembling Steps

Assemble the extension ring (Fig. 1

1. Unscrew the three screws on the bottom of

the stand in order to remove the microscope

arm.

2. Install the extension ring on the stand, then

reinstall the microscope arm.

•The extension ring is used to increase the

length of the microscope arm, thus

increasing the working distance.

Assemble the HDMI monitor (fig.3

1. Unscrew the three screws on the top of the

microscope arm, then remove the cap.

Install the provided cap by screwing the

three screws

Fig. 2

Fig. 1

Fig. 3

Fig. 4

3. Install the rectangular HDMI monitor holder

using the two provided screws.

4. Assemble the HDMI monitor on the

rectangular bracket using the provided

screws.

Pag. 9

Fig. 5

Fig. 6

Fig. 7

Assemble the Microscope Body (Fig.

1. Match the dovetail interface ①of the

microscope body with the dovetail groove

②of the focus bracket group, and insert it

from top to bottom as the direction shown

in the figure.

2. Tighten the M4 inner hexagon screw on the

body group ③with a M4 inner hexagon

spanner (side length 2mm).

Assemble the LED Ring Light

(Fig. 6)

1. Move the LED right light close to the

microscope body according to the

arrowhead direction, align the three screw

holes ①with the thread groove ②, and

lock the screw with a M4 inner hexagon

spanner(side length 2mm).

Connect the Power Cord (Fig. 7)

1. Insert the external adapter plug

①

into the

power supply adapter socket ②of the

microscope body to the bottom, and the

power will be switched on.

Don’t use excessive force when the

power cord is bended or twisted,

otherwise it will be damaged.



Use the special wire supplied by our

company. If lost or damaged, choose an

external power adapter with the same

specifications (power cord/charger).

Pag. 10

Fig. 10

Fig. 8

Fig. 9

6 Installing Additional lenses

(Fig. 8

10)

It is possible to install any of the available

additional lenses (0.5x or 1.4x). To do this,

please follow these steps:

1. Remove the LED ring light from the bottom

of the microscope body. (Fig. 8)

Using the provided Allen wrench, loosen

the screws placed on the front, on the right

and on the left sides of the microscope

body, in order to remove the LED ring light

holder.(Fig. 9)

3. Unscrew the existing lens installed on the

microscope and replace with the desired

additional lens. (Fig. 10)

4. Reverse the disassembly procedure to

reinstall the removed parts.

This manual suits for next models

Table of contents

Languages:

Other Optika Microscope manuals

Popular Microscope manuals by other brands

Thermo Scientific

Thermo Scientific Nicolet iN10 Using

National

National DC3-163 instructions

KERN Optics

KERN Optics OPE-1 User instructions

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Operation manual

Prior

Prior Lux POL operating instructions

Opitec

Opitec Smartscoop 115615 instructions

KERN

KERN OPO-1 operating instructions

Topcon

Topcon SP-1P user manual

Motic

Motic PA43 Operation manual

Leica

Leica DVM5000 Setup manual

MshOt

MshOt MZ62 user manual

KERN Optics

KERN Optics OZR-5 User instructions

VWR

VWR VisiScope 384 Series instruction manual

Nikon

Nikon ECLIPSE E200 POL instructions

Leica

Leica DI C800 User's manual & installation instructions

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

Olympus

Olympus SZ61 instructions