Ninja BL770 30 User manual

Mega Kitchen System®

®BL770 series

OWNER’S GUIDE

www.ninjakitchen.com

1 877 646-5288

11-877-646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,

BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS BEFORE

USING YOUR NINJA®MEGA KITCHEN

SYSTEM®.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a polarized

plug (one blade is wider than the other). This

plug will ﬁt into a polarized outlet only one

way. If the plug does not ﬁt fully into the

outlet, reverse the plug. If it still does not ﬁt,

contact a qualiﬁed electrician to install the

proper outlet. DO NOT modify the plug in

any way.

WARNING: Extension cords are

not recommended for use with this product.

WARNING: TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK OR INJURY:

1 CAUTION: Blade assemblies are

sharp and removable, handle with care.

When handling the blade assemblies,

always hold by the shaft.

2CAUTION: DO NOT BLEND HOT FOODS

OR HOT LIQUIDS.

3CAUTION: We do not recommend

grinding in any of our Nutri Ninja®Cups.

4 To protect against electrical shock, do not

submerge the appliance or allow the power

cord to come into contact with water or

any other liquid.

5 DO NOT allow young children to operate the

appliance or use as a toy. Close supervision

is necessary when any appliance is used by

or near children.

6 Never leave an appliance unattended when

inuse.

7 Appliance accessories are not intended to

be used in the microwave as it may result in

damage to the accessories.

8 Turn the appliance Off and remove the power

cord from the electrical outlet when not in

use, before assembling or disassembling

parts and before cleaning. To unplug, grasp

the plug and pull from the electrical outlet.

Never pull from the power cord.

9 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it

to disconnect from electrical outlet; instead

grasp the plug and pull to disconnect.

THIS BOOK COVERS MODEL NUMBERS:

BL770 30

BL770A 30

BL770W 30

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 1500 Watts

Pitcher Capacity: 72 ounces (9 cups, 2.1 L)

MAX Liquid Capacity: 64 ounces (8 cups, 1.9 L)

Bowl Capacity: 64 ounces (8 cups, 1.8 L)

Nutri Ninja®Cup Capacity: 16 ounces (2 cups, 470ml)

www.ninjakitchen.com

21 To reduce the risk of injury, NEVER operate

the appliance without the lid in place; DO

NOT try to defeat the interlock mechanism;

make sure that the attachment is properly

installed before operating the appliance.

22 DO NOT expose containers to extreme

temperaturechanges.

23 DO NOT overﬁll.

24 DO NOT operate the appliance empty.

25 To reduce the risk of burns, always allow

the appliance to cool before taking off parts

and before cleaning.

26 In the event that the unit overloads, the unit

will shut down. Unplug the appliance and let

it cool down for approximately 15 minutes

before using again.

27 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use

this appliance for anything other than its

intended use. Do not use outdoors.

28 The maximum rating is based on the

6-Blade Assembly (pitcher) that drives the

greatest power and other recommended

attachments may draw signiﬁcantly less

power or current.

SAVE THESE

INSTRUCTIONS

10 DO NOT operate any appliance with

a damaged cord or plug, or after the

appliance malfunctions, has been dropped

or damaged in any manner. This appliance

has no serviceable parts. Return the

appliance to EURO-PRO Operating LLC for

examination, repair or adjustment.

11 DO NOT let the power cord hang over

the edge of table or counter or touch hot

surfaces such as the stove.

12 Always use appliance on a dry, level surface.

13 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the

risk of severe injury to persons or damage to

the appliance. A scraper may be used but only

when the appliance is not running.

14 Avoid contact with moving parts.

15 DO NOT attempt to sharpen blades.

16 DO NOT use the appliance if blade

assembly is bent or damaged.

17 To reduce risk of injury, never place the

blade assembly on base without pitcher or

bowl properly attached.

18 DO NOT operate this appliance on or near

any hot surfaces (such as gas or electric

burner or in a heated oven).

19 The use of attachments or accessories

including canning jars, not recommended by

the manufacturer may result in ﬁre, electric

shock or personal injury.

20 DO NOT remove the container from the

motor base while the appliance is in

operation.

31-877-646-5288

Contents

Thank you for

purchasing

the Ninja®

Mega Kitchen

System®.

Getting to Know Your Ninja®Mega Kitchen System®....................................................4

Using the Ninja®Mega Kitchen System®...................................................................5

Assembly and Use for the Blender Pitcher ..................................................................6

Assembly and Use for the Nutri Ninja®Cup.................................................................8

Assembly and Use for the Food Processor Bowl ..........................................................9

Speed Setting & Uses..............................................................................................11

Care & Maintenance ...............................................................................................12

Troubleshooting Guide.............................................................................................13

Replacement Parts..................................................................................................13

Warranty & Registration...........................................................................................14

FEATURES:

• PatentedNinja®Technology

• ExtraLarge,72oz.BlenderPitcher(MAXLiquidCapacity:64oz.)-BPAFree

• 64oz.FoodProcessorBowlwithDrizzleHoleLid-BPAFree

• NutriNinja®Cups - BPA Free

• Lock–InLid,FeaturingPourSpout

• EasytoCleanElectronicControlPanel

• Sturdy,Non-SlipBase

www.ninjakitchen.com

d64 oz. Food Processor Bowl

eBowl Lid with Locking Handle

fDough Blade (bowl)

g4-Blade Assembly (bowl)

a16 oz. Nutri Ninja®Cup (x2)

bTo-Go Lid (x2)

cSingle Serve Blade

NOTE: Blades are not interchangeable.

Getting To Know Your Ninja®Mega Kitchen System®

h72 oz. Blender Pitcher

iPitcher Lid with Locking Handle

j6-Blade Assembly (pitcher)

kMotor Base

lPower Cord (not shown)

51-877-646-5288

Using the Ninja®Mega Kitchen System®

CAUTION: Blade assemblies are sharp, not locked in

place and removable, handle with care. When handling

the blade assemblies, always hold them by the shaft.

BEFORE FIRST USE

1Remove all packaging material and labels from the

appliance.

2Wash the lids, pitcher, bowl, Nutri Ninja®cups and

attachments in warm, soapy water with a soft cloth.

CAUTION: Handle the blade assemblies with care

when washing, as the blades are very sharp.

3Rinse and dry thoroughly.

4 The pitcher, bowl, Nutri Ninja®cups, lids and

attachments, are all dishwasher safe. It is recommended

that the lids and attachments be placed on the top rack.

Ensure that the attachments are removed from the

containers before placing in the dishwasher.

5Wipe the motor base clean with a damp cloth.

PLEASE KEEP THESE IMPORTANT

SAFEGUARDS IN MIND WHEN USING THE

APPLIANCE:

WARNING: Never leave the appliance

unattended while in use.

WARNING: Secure the appliance while in use

by pressing down on the lid with one hand.

CAUTION: Blades are sharp! Use extreme

caution when handling the blade

assemblies. Always hold them by the shaft

of the blade assembly.

CAUTION: DO NOT BLEND HOT FOODS OR HOT

LIQUIDS.

CAUTION: Never remove the container while

the appliance is still running.

CAUTION: We do not recommend grinding in

any of our Nutri Ninja®Cups.

IMPORTANT: Never add ingredients into the

container before placing the attachment in

ﬁrst.

IMPORTANT: Attachments are not

interchangeable.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it

may result in damage to the accessories.

CAUTION: Blades

are not locked in

place. If using the

pour spout, ensure

the lid is fully

locked onto the

blender pitcher.

CAUTION: Blades

are not locked in

place. If pouring

with the lid

removed, ALWAYS

remove the blade

assembly ﬁrst.

www.ninjakitchen.com

Fig. 3b

Fig. 1

Assembly and Use for the Blender Pitcher

1Place the motor base on a clean, dry, level surface

such as a counter or table top.

2Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

3Rotate the pitcher clockwise until it locks in place. You

will hear a click when the lock is engaged. (Fig. 2)

4The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

5Holding the 6-Blade Assembly by the top of the shaft,

place it onto the drive gear inside the pitcher. Ensure

that the attachment is seated properly and is standing

upright. (Fig. 4)

NOTE: The blade will ﬁt loosely on the drive gear.

6Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line

on the side of the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap

and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the

“Max liquid” mark (64 ounces) on the pitcher.

7Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power

button ( ) will ﬂash and the motor will not work

if the pitcher and lid are not installed correctly.

When the pitcher and lid are installed properly,

the power button ( ) will be solid, indicating that

the appliance is ready for use.

8Holding the lid by the handle in the upright position,

place it on top of the pitcher aligning the arrow ( )

located on the lid with the arrow ( ) located on the

pitcher’s handle. (Fig. 5) Press the handle down until

you hear a click.

Fig. 4 Fig. 5

ASSEMBLY

Fig. 3a

WARNING: Never leave the appliance unattended while in use.

CAUTION: Handle the blade assemblies with care, as the blades are very sharp.

IMPORTANT: Make sure that the motor base is plugged in for use.

Fig. 2

71-877-646-5288

WARNING: Never leave the appliance unattended

while in use.

9Select the speed that best suits your needs. (Fig. 6)

NOTE: Pulse ingredients for even chopping by pressing

down in short intervals.

10 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and

wait for the attachment to stop turning. (Fig. 7)

11 To remove the lid, press the release button on the lid,

pull the lid handle up to a 90° angle and lift the lid off.

Turn the pitcher counter clockwise and then lift off the

base. (Fig. 7, Fig. 8)

CAUTION: Never insert your hands in the pitcher

as the blades are sharp. Always use a spatula to

dislodge food that has stuck to the sides of the

pitcher.

Assembly and Use for the Blender Pitcher - cont.

Fig. 7

USE REMOVAL

Fig. 6 Fig. 8

12 Depending on the consistency of the contents in the

container, open the pour spout cap and use the spout

to empty liquid contents. For thicker consistencies,

remove the lid and attachment carefully (by its shaft),

then empty contents from the container.

CAUTION: Blades are not locked in place. If using

the pour spout, ensure the lid is fully locked onto

the blender pitcher.

13 For thicker consistencies, remove the lid and blade

attachment carefully (by its shaft), then empty contents

from the container. To remove the lid, press the release

button on the lid and pull the lid handle up to a 90°

angle and lift the lid off the blender pitcher.

CAUTION: Blades are not locked in place. If

pouring with the lid removed, ALWAYS remove the

blade assembly ﬁrst.

14 Make sure that the unit is unplugged when not in use.

15 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base

and gently pull the unit up and towards you. (Fig. 9)

Fig. 9

www.ninjakitchen.com

1Place the motor base on a clean, dry, level surface such

as a counter or table top.

2Add ingredients to the Nutri Ninja®cup.

3Place the single serve blade onto the cup and screw it

tightly until you have a good seal. (Fig. 1)

4Turn the Nutri Ninja®cup upside down and place it

onto the motor base, aligning the tabs on the cup with

the motor base. Turn the Nutri Ninja®cup clockwise to

lock into place. You will hear a click when the lock is

engaged. (Fig. 2) Turn the power button on, the single

serve button will illuminate.

5Press down on the Single Serve button in short

intervals to activate. (Fig. 3)

6Once you have reached your desired consistency,

turn the power button off. Turn the Nutri Ninja®cup

counter clockwise and pull straight up to remove.

(Fig. 4, Fig. 5)

Fig. 2

Assembly and Use for the Nutri Ninja®Cup

Fig. 3 Fig. 4 Fig. 5

ASSEMBLY USE REMOVAL

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max” ﬁll line.

7Turn the cup upright and remove the single serve blade

by twisting the blade assembly counter clockwise.

8Place the To-Go drinking lid onto the Nutri Ninja®cup,

twist to seal and enjoy!

9Make sure that the motor base is unplugged when not

in use.

10 To release the motor base from

the counter or table top, place your

hands underneath both sides of the

motor base and gently pull the unit

up and towards you. (Fig. 6)

NOTE: To order additional Nutri

Ninja®Cups, please visit our website:

www.ninjakitchen.com or feel free to contact

customer service: 1-877-646-5288.

Fig. 1

For best results, use short “PULSES”... Practice makes perfect!!

Fig. 6

WARNING: Never leave the appliance unattended while in use.

CAUTION: Handle the blade assemblies with care, as the blades are very sharp.

CAUTION: DO NOT BLEND HOT FOODS OR HOT LIQUIDS.

IMPORTANT: Make sure that the motor base is plugged in for use

91-877-646-5288

Assembly and Use for the Food Processor Bowl

ASSEMBLY

1Place the motor base on a clean, dry, level surface such

as a counter or table top.

2Align and lower the Bowl onto the motor base. (Fig. 1)

Handle should be aligned slightly to the right of the

“LOCK” symbol on the motor base.

3 Rotate the bowl clockwise to lock into place. You will

hear a click when the lock is engaged. (Fig. 2)

4The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

5Holding the desired blade by the top of the shaft, place

it onto the drive gear inside the bowl. Ensure that the

attachment is seated properly and is standing upright.

(Fig. 4)

NOTE: The blade will ﬁt loosely on the drive gear.

6 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on

the side of the bowl.

7Holding the lid by the handle in the upright position,

place it on top of the bowl aligning the arrow ( )

located on the lid with the arrow ( ) located on the

bowl’s handle. (Fig. 5) Press the handle down until you

hear a click.

NOTE: The 64 oz. bowl is not intended for

blending drinks. Do not overﬁll.

NOTE: To add liquids during processing,

open the drizzle hole on the top of the

lid and pour the liquid slowly into the

mixture.

8Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power

button ( ) will ﬂash and the motor will not work

if the bowl and lid are not installed correctly.

When the bowl and lid are installed properly, the

power button ( ) will be solid, indicating that the

appliance is ready for use.

Fig. 4 Fig. 5

Fig. 1 Fig. 3a

Fig. 3b

WARNING: Never leave the appliance unattended while in use.

CAUTION: Handle the blade assemblies with care, as the blades are very sharp.

IMPORTANT: Make sure that the motor base is plugged in for use.

Fig. 2

This manual suits for next models

Table of contents

Other Ninja Kitchen Appliance manuals

Ninja

Ninja Foodi User manual

Ninja

Ninja CREAMi NC300 Series User manual

Ninja

Ninja Foodi AD150 User manual

Ninja

Ninja Ninja Storm User manual

Ninja

Ninja MC950Z User manual

Ninja

Ninja MC701 User manual

Ninja

Ninja BL685 User manual

Ninja

Ninja Foodi User manual

Ninja

Ninja Foodi NeverStick Bakeware User manual

Ninja

Ninja Foodi User manual

Ninja

Ninja Foodi MAX OL750UK User manual

Ninja

Ninja CREAMi DELUXE NC500 Series User manual

Ninja

Ninja Foodi NeverDull User manual

Ninja

Ninja Nutri BL480D User manual

Ninja

Ninja Foodi MAXPRO AG651UK User manual

Ninja

Ninja MC703CO User manual

Ninja

Ninja CS970Q Series User manual

Ninja

Ninja MC700NZ User manual

Ninja

Ninja MC702Q User manual

Ninja

Ninja MC750 User manual

Ninja

Ninja FOODI NeverDull User manual

Ninja

Ninja Foodi ST200UK Series User manual

Ninja

Ninja Ninja MC703 User manual

Ninja

Ninja Foodi SmartLid OL650ANZ User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions