La Sommeliere TR2V150 User manual

INSTRUCTIONS FOR USE

MODEL: TR2V150

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

For your own safety and for the proper utilisation of the appliance,

read this manual carefully, including the warnings and

recommendations, before installing the appliance and using it for the

first time. In order to avoid damage to the appliance and/or personal injury,

persons using the appliance should be fully familiar with its operation and

safety functions. Keep these recommendations close to the appliance, for

future reference, and ensure that the document is transferred with the

appliance, if it is sold or in the case of moving. This will ensure optimum

operation of the appliance.

To avoid any risk of injury, keep this manual. The manufacturer declines any

liability whatsoever in the case of operating/handling errors concerning the

appliance.

Safety of children and other vulnerable persons

•This appliance may be used by children aged 8 years and above, and

by persons who are physically, sensorially or mentally handicapped, or

who have not learned to use the appliance, providing they are

supervised by a person familiar with the appliance and who is aware of

the risks involved. Children should not be allowed to play with the

appliance. User cleaning and servicing operations should not be

carried out by children, unless they are more than 8 years old and are

supervised.

•Keep all packaging out of the reach of children, as there is a risk of

suffocation.

•If you decide to scrap the appliance, disconnect it from the wall socket,

cut the connection cable (as close to the appliance as possible) and

remove the door, in order to prevent children playing with it, with the

resulting risk of electric shock or being trapped inside.

•If an appliance with a magnetic door seal is being replaced by another

appliance with a latch on the door or on the seal, ensure that the latch

is disabled before selling or scrapping the old appliance. This will

prevent the appliance from being transformed into a trap forchildren.

•Keep the appliance and its power cable out of reach of children less

than 8 years old.

General safety

•CAUTION — This appliance is designed for home use.

•CAUTION — Never store inflammable substances, such as aerosols,

inside the appliance, as they could leak or release fluids.

•CAUTION — A damaged power cable should be immediately replaced

by the manufacturer or by a qualified retailer, in order to avoid any risk

of electric shock.

•CAUTION — Keep the ventilation openings well open and ensure that

air can circulate, especially if the appliance is recessed into awall.

•CAUTION — Do not damage the refrigerating circuit.

•CAUTION — Do not use electrical appliances inside the compartment,

unless they are tolerated by the manufacturer.

•CAUTION — The refrigerating and insulating systems contain

inflammable gases. When the appliance is scrapped, it should be

deposited at an accredited collection centre. Do not expose the

appliance to fire.

Refrigerating fluid

The refrigerating circuit in the appliance uses refrigerating isobutane

(R600a), which is a highly inflammable natural gas and is therefore

dangerous for the environment. When transporting or installing the

appliance, ensure that no element of the refrigerating circuit is damaged.

The refrigerating fluid (R600a) is inflammable.

Caution: Fire risk

If the refrigerating circuit is damaged:

- Avoid open flames or any source of combustion.

- Ensure that the room in which the appliance is installed is wellventilated.

It is dangerous to change the specification of the appliance in any way

whatsoever.

Damage to the power cable may cause a short circuit and/or electric shock.

Electrical safety

•We decline any liability in respect of incidents caused by poor electrical

installation.

•Do not extend the power cable. Do not use an extension cable, or

adapter, or multi-way socket.

•Check that the wall socket is not damaged. A wall socket in poor

condition may cause the appliance to overheat and explode.

•Check that the wall socket used for the appliance is properly

accessible.

•Never pull on the main power cable.

•Ensure that the appliance is always electrically earthed.

•If the wall socket is loose, do not connect the cable, as there is a risk of

electric shock or fire.

•Do not use the appliance if the interior lighting cover is not installed.

•Disconnect the appliance before replacing the lightingbulb.

•The appliance operates on a single phase 220~240 V / 50 Hz power

supply. The appliance must be connected to an earthed wall socket, in

accordance with applicable recommendations.

•Do not attempt to replace a damaged power cable, contact your after-

sales service.

•The power socket must be easily accessible but out of reach of

children. In case of doubt, contact your installationtechnician.

Daily utilisation

•Do not store inflammable substances or fluids inside the appliance.

This would create a risk of explosion.

•Do not operate other electrical equipment inside the appliance (mixers,

whirling rotor for ice cream, etc.).

•When disconnecting the appliance, grip the plug firmly and do not pull

on the cable.

•Do not expose the appliance to direct sunlight.

•Keep the appliance away from candles, luminaires and open flames, in

order to avoid fire risk.

•This appliance is only designed to store wines and drinks.

•The appliance is heavy. Be careful when moving it.

•If your appliance is equipped with castors, remember that these are

only designed to facilitate minor movements. Do not move the

appliance over long distances.

•Do not lean or climb on the appliance or its elements.

•In order to avoid falling objects and to prevent damage to the

appliance, do not overload the compartments of theappliance.

Caution! Cleaning and servicing

•Before carrying out servicing, switch off the power supply and

disconnect the appliance.

•When cleaning the appliance, do not use metal objects, steam

systems, volatile fluids, organic solvents or abrasivesubstances.

•Do not use sharp or pointed objects to remove ice. Use a plastic

scraper.

Important information concerning installation!

•To ensure proper electrical connection, follow the recommendations

given in the present manual.

•Unpack the appliance and visually check that it is not damaged. Do not

connect a damaged appliance. Inform your retailer or point of sale of

any damage. In such a case, keep the packaging.

•It is recommended that the appliance be allowed to settle for at least

4 hours before connecting the electrical power supply, so that the

compressor fluid feed is correct.

•Proper air circulation is necessary to avoid overheating. To ensure

sufficient ventilation, observe the installation recommendations

provided.

•In order to avoid fire risk, wherever possible, ensure that the appliance

is not in contact with walls or with any hot element(compressor,

condenser). Observe the installation recommendations.

•The appliance should not be placed close to radiators or cookinghot

plates or gas rings.

•Check that electrical sockets remain accessible when the appliance is

installed.

POWER SAVING

To limit the electricity consumption of your appliance:

• Install it in an appropriate place (see “Installing yourappliance”).

• Leave the doors open as little time aspossible.

•To ensure that the appliance operates properly, clean the condenser

regularly (see “Routine servicing of your appliance”).

• Regularly inspect the door seals and ensure that they are stillclosing

properly. If this is not the case, contact your after-salesservice.

Trouble shooting

•Any electrical work should be carried out by a qualified and

skilled technician.

•The appliance should be repaired by an accredited repair centre, using

only manufacturer’s original spareparts.

The appliance is designed for home use only. The manufacturer declines any liability whatsoever in the case of other

utilisation.

R600a

Safety instructions

This appliance meets the requirements of all applicable European directives and their

amendments.

PROTECTION OF THE ENVIRONMENT

The packaging materials with this appliance may be recycled.

Contribute to their recycling and to the protection of the environment by depositing them in the specific

municipal containers provided for this purpose.

Your appliance also contains many materials that can be recycled. It therefore bears the logo that informs

you that scrapped appliances should not be mixed with other waste. Thus, the appliance will be recycled

by the manufacturer, under optimum conditions, in compliance with European directive 2002/96/EC

relating to Waste Electrical and Electronic Equipment. Contact your local municipal offices or your retailer,

to identify the nearest collection points for scrapped appliances. Thank you for helping to protect the

environment.

Caution: The refrigerating units use isobutane

(R600a), and should not be placed close to ignition

sources (for example, electrical contacts that are

exposed or open contacts that could be closed by the

refrigerating fluid in the event of a leak). The

refrigerating fluid type is specified on the power

cabinet identification plate.

Caution: Do not store explosive substances, such as

aerosol cans containing an inflammable propellant,

in the appliance.

Caution: Do not obstruct the ventilation grills on

the appliance.

Caution: Do not damage the refrigerating circuit in

the appliance.

Caution: Do not use electrical equipment in the

compartments of the appliance, unless they are of

the type recommended by the manufacturer.

INSTALLATION INSTRUCTIONS

➢

Before Using Your Wine Cooler

Remove the exterior and interior packing.

Before connecting the Wine Cooler to the power source, let it stand upright for

approximately 2 hours. This will reduce the possibility of a malfunction in the

cooling system from handling duringtransportation.

Clean the interior surface with lukewarm water using a softcloth.

➢

Installation of Your Wine Cooler

This appliance is designed to be for free standing installation or built-in (fully

recessed) (Refer to sticker location the back of this appliance).

Place your Wine Cooler on a floor that is strong enough to support it when it is

fully loaded. To level your Wine Cooler, adjust the front leveling leg at the

bottom of the Wine Cooler.

Locate the Wine Cooler away from direct sunlight and sources of heat (stove,

heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat

sources may increase electrical consumption. Extreme cold ambient

temperatures may also cause the unit not to performproperly.

Avoid locating the unit in moistareas.

Plug the Wine Cooler into an exclusive, properly installed-grounded wall outlet.

Do not under any circumstances cut or remove the third (ground) prong from

the power cord. Any questions concerning power and/or grounding should be

directed toward a certified electrician or an authorized Products servicecenter.

OPERATING YOUR WINE COOLER

The Wine Cooler should be placed in where the ambient temperature is between 16-

32°C. If the ambient temperature is above or below this range, the performance of the

unit may be affected. For example, placing your unit in extreme cold or hot conditions

may cause interior temperatures to fluctuate. The range of 5-20℃ may not be reached.

The above temperatures may fluctuate depending on whether or not the interior bulb

is ON or OFF or whether the bottles are located on the upper/middle or lowersection.

➢

The controls of your wine Cooler

RUN

Indicator light illuminates to signify the cooling mode is currently in operation.

Light

To control the inner light, turn on/off.

Power

To control this appliance, turn on/off.

•“Set Upper” Button

To set the temperature of the upper chamber.

•“Set Lower” Button

To set the temperature of the lower chamber.

•“Up chamber”

To shows the temperature of the up chamber.

•“Lower chamber”

To shows the temperature of the lower chamber.

➢

Setting the Temperature Control

Each cooling compartment of the wine cooler (upper & lower) is independently

controlled. To set the temperature:

Connect the power cord to a properly grounded outlet. In the event of a power

interruption, all previous temperature settings are automatically erased and each

compartment will default to a preset temperature setting of: 7℃ for upper

compartment and 12℃ for lower compartment.

•

Set the desired cooling temperature by pressing the buttons adjacent to the “set

upper/set lower” program. Each depression of the buttons will scroll through the

available temperature settings (for each compartment) in increments of 1 degree.

The temperature selected will flash in the LED display for approximately 5 seconds,

then revert back to display the temperature of the internalcabinet

Upper compartment: The temperature setting can be adjusted from 5 to 20°C.

Lower compartment: The temperature setting can be adjusted from 5 to 20°C.

•

To view the “set” temperature. (anytime) press and hold the corresponding button

for approximately 5 seconds, the “set” temperature will temporarily “flash” in the

LED display for 5 seconds.

➢

Temperature Alarm

The temperature adjust range is from 5 to 20°C.

•

When temperature is lower than 0, it will have “Beep” sound, and “LO” will show in

display, this is for low temperature alarm. When temperature is higher than 23, it

will have “Beep” sound, and “HI” will show in display, this is for high temperature

alarm. When alarm happens, please call servicer formaintain

➢

Interior Light

You can turn the interior light ON or OFF by pushing the button marked with the “bulb”

symbol or “LIGHT”.

In order to save energy consumption, the light will be automatically off after 10

minutes when turned on.

But if you want to keep the light on permanently, please keep pressing "LIGHT"

button for 5 seconds after a “beep” and the display shows "LP”.

If you want to reset (automatically off after 10 minutes), please keep pressing

"LIGHT" button for 5 seconds again until display shows"LF".

➢

Shelves

To prevent damaging the door gasket, make sure to have the door all the way

opened when pulling shelves out of the rail compartment.

For easy access to the storage content, you must pull the shelves approximately 1/3

out of the rail compartment, however this unit was designed with a notch on each

sides of the shelf tracks to prevent bottles fromfalling.

Put the shelf gap (left and right) under the square plastic block, up tilt the shelf,

then pull the shelf from the Wine Cooler.

➢

Note

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes

before restarting the unit. If you attempt to restart before this time delay, the

Wine Cooler will not start.

When you use the wine cooler for the first time or restart the wine cooler after

having been shut off for a long time, there could be a few degrees variance

between the temperature you select and the one indicated on the LED readout.

This is normal and it is due to the length of the activation time. Once the wine

cooler is running for a few hours everything will be back tonormal.

➢

Door Lock

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the User’s Guide. Insert the key

into the lock and turn it counterclockwise to unlock the door. To lock the door, do the

reverse operation making sure metal pin is engaged completely. Remove the key and

place it in a secure place for safekeeping.

Table of contents

Other La Sommeliere Kitchen Appliance manuals

La Sommeliere

La Sommeliere VIP 180 User manual

La Sommeliere

La Sommeliere VIP 185 User manual

La Sommeliere

La Sommeliere CVD117 User manual

La Sommeliere

La Sommeliere APOGEE150 User manual

La Sommeliere

La Sommeliere CVD121V User manual

La Sommeliere

La Sommeliere CVD50 User manual

La Sommeliere

La Sommeliere VIP 160 User manual

La Sommeliere

La Sommeliere LS51.2Z Operating and maintenance manual

La Sommeliere

La Sommeliere VIP 195 N User manual

La Sommeliere

La Sommeliere SSLS33DZ Quick guide

La Sommeliere

La Sommeliere SLS102DZS Operating and maintenance manual

La Sommeliere

La Sommeliere LS24A User manual

La Sommeliere

La Sommeliere LS36BLACK Operating and maintenance manual

La Sommeliere

La Sommeliere MZ135DZ Operating and maintenance manual

La Sommeliere

La Sommeliere LS 48B User manual

La Sommeliere

La Sommeliere CAF51N User manual

La Sommeliere

La Sommeliere CVD102DZ User manual

La Sommeliere

La Sommeliere APOGEE185DZPRO User manual

La Sommeliere

La Sommeliere SLS106 Operating and maintenance manual

La Sommeliere

La Sommeliere CV7T Quick guide

La Sommeliere

La Sommeliere CVD120 User manual

La Sommeliere

La Sommeliere LSBU51DB2 User manual

La Sommeliere

La Sommeliere SLS32DZBLACK User manual

La Sommeliere

La Sommeliere CAC01 User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions