Krups VB215850 User manual

EN ............................................ P. 1

ES............................................ P. 13

FR............................................ P. 25

www.krups.com

RÉF. NC00018209

WWW.KRUPS.COM

VB2158

notice_krups_beertender_nafta.indd 1-3 10/08/10 11:48:11

4 inches

54°F

86°F

2,5 inches2,5 inches

fig. 1 fig. 2 fig. 3

fig. 4 fig. 5 fig. 6

fig. 16 fig. 17 fig. 18

fig. 19 fig. 20 fig. 21

fig. 7 fig. 8 fig. 9

fig. 10 fig. 11 fig. 12

fig. 13 fig. 14 fig. 15 fig. 22 fig. 23

DO NOT - CUIDAR PARA EVITAR RIESGOS - À NE PAS FAIRE

notice_krups_beertender_nafta.indd 4-6 10/08/10 11:48:12

English

Important safeguards............................................................................................................................ 2

General Information................................................................................................................................ 3

Product description.................................................................................................................................. 4

Before use .......................................................................................................................................................... 4

Using the BeerTender®......................................................................................................................... 5

Troubleshooting........................................................................................................................................... 8

Disposal..............................................................................................................................................................10

Consumer service....................................................................................................................................10

Limited warranty.......................................................................................................................................11

notice_krups_beertender_nafta.indd 1 10/08/10 11:49:11

English

IMPORTANT SAFEGUARDS

nWhen using electrical appliances, basic safety precautions should always

be followed to reduce the risk of ﬁre, electric shock, and/or injury to persons

including the following:

1. Read all instructions.

2. To protect against ﬁre, electric shock and injury to persons, do not place

cord, plugs or appliance in water or other liquid.

3. Close supervision is necessary when any appliance is used near children.

Keep appliance out of reach of children. Product not intended for use by

children.

4. Unplug from outlet when not in use and before cleaning. Allow to cool

before putting on or taking off parts, and before cleaning the rest of the

appliance.

5. Do not operate any appliance with a damaged cord or plug or after

the appliance malfunctions, or has been damaged in any manner.

Return appliance to your nearest authorized Krups Service Center for

examination, repair or adjustment (see Limited Warranty).

6. The use of an accessory not evaluated for use with this appliance by

Krups may result in ﬁre, electric shock or injury to persons.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or counter, or touch hot

surfaces.

9. Do not place on or near a hot gas or electric burner, or in a heated oven.

10. To disconnect, turn the control to «off» then remove plug from wall

outlet.

11. Do not use appliance for other than intended use.

12. Appliance for household indoor use only.

13. Do not immerse in water.

notice_krups_beertender_nafta.indd 2 10/08/10 11:49:11

English

SAVE THESE INSTRUCTIONS

CAUTION: This appliance is for household use only. Any servicing other

than cleaning and user maintenance should be performed by an authorized

service representative.

nTo reduce the risk of ﬁre or electric shock, do not remove the base. No

user serviceable parts inside. Repair should be done by authorized service

personnel only.

nCheck voltage to be sure that the voltage indicated on the name plate is

compatible with your voltage.

nNever clean with scouring powders or harsh chemicals.

nNever make technical changes or use the appliance in any manner other

than as directed.

SHORT CORD INSTRUCTIONS

A. We do not recommend using an extension cord with this device.

B. If an extension cord is absolutely necessary:

1 - The marked electrical rating of the extension cord should be at least as

great as the electrical rating of the appliance.

2 - To reduce the risk of injury, do not drape cord over the counter top or table

top where it can be pulled on by children or tripped over unintentionally.

3 - The extension cord should be at least 18 AWG.

GENERAL INFORMATION

The BeerTender®is designed to dispense chilled beer in a domestic setting.

Only a Heineken®DraughtKegTM, Heineken Premium Light®DraughtKegTM

and Newcastle Brown Ale®DraughtKeg™ can be used with the BeerTender®.

You should not use any other commercially available beer containers or

kegs. Do not introduce any materials other than the DraughtKegTM inside the

appliance.

BeerTender®is designed for use by responsible adults of legal

drinking age.

GUIDELINES FOR READING THESE INSTRUCTIONS

THE WARNING INDICATES INSTRUCTIONS THAT ARE

IMPORTANT FOR THE USER’S SAFETY.

nPlease adhere strictly to these directions to ensure proper use and avoid

serious injury!

This symbol highlights information that is especially important for making the

best use of the machine.

notice_krups_beertender_nafta.indd 3 10/08/10 11:49:11

English

PRODUCT DESCRIPTION

BeerTender®components

1. BeerTender®at home draughting system

2. Refrigerating chamber

3. Lid

4. Lid opening handle

5. Control panel

6. Tap cover

7. Dispensing spout

8. Beer tap handle

9. Drip grate

10. Drip tray

11. Main power switch

12. Power cord with plug

Other Components

13. 5 Liter DraughtKegTM (not included)

14. Replaceable Draught Beer tube (Should be changed with each new

DraughtKegTM) (5 included with purchase)

BEFORE USE

CHILD SAFETY LOCK

nMake sure that children can not play with the appliance.

nDo not leave the materials used to pack the appliance within children’s

reach.

nTo prevent children from using the appliance, you can remove the tap

handle. To remove the handle, make sure that it is in an upright position and

pull upward - ﬁg. 1.

FIRE PREVENTION

nIn the event of a ﬁre, use carbon dioxide (CO2) extinguishers.

nDo not use water or powder extinguishers.

notice_krups_beertender_nafta.indd 4 10/08/10 11:49:11

English

SETUP AND MAINTENANCE

nInstall the BeerTender®in an upright position in a safe place.

To ensure that the BeerTender®works correctly and efﬁciently, the following

is strongly advised:

nPlace it on a perfectly level and stable surface.

nChoose a clean, well-lit area with an easily accessible electric socket.

nKeep the appliance at a minimum distance (4 inches) from the stove as

shown in the diagram - ﬁg. 2.

nKeep the appliance at a minimum distance (2 ½ inches) from the walls.

nStore the DraughtKegTM at room temperature or in the refrigerator.

nMake sure the BeerTender®is not exposed to direct sunlight.

nDo not use the BeerTender®outdoors.

nDo not place the BeerTender®on very hot surfaces or near open ﬂames, as

these may melt or damage the casing.

nYour BeerTender®uses a technology that delivers ultimate cooling results

when the ambient temperature is between 54°F and 86°F. At colder

temperatures, the appliance cooling system could be damaged. At

warmer temperatures, the cooling system will not be able to reach the pre-

programmed temperature - ﬁg. 3.

WARNING! To avoid overheating, always keep the BeerTender®appliance

out of direct sunlight. To obtain good cooling performance, never install your

machine in a room with an ambient temperature above 86°F.

USING THE BEERTENDER®SYSTEM

nAlways hold the appliance by the bottom edge when lifting - ﬁg. 4.

nTo obtain draught beer of optimal quality you should keep two basic factors

in mind, the temperature of the beer and hygienic conditions. Follow these

few simple steps for the ideal use of BeerTender®.

A new draught beer tube should be used with each DraughtKegTM.

A bag of 5 tubes is included with the BeerTender®appliance. To order

additional beer tubes, please contact www.beertender.com or call

1-888-KRUPS.

notice_krups_beertender_nafta.indd 5 10/08/10 11:49:11

English

CHILLING THE DRAUGHTKEGTM

1. Before pouring a draught beer, it is very important that the Heineken®,

Heineken Premium Light®DraughtKegTM and Newcastle Brown Ale®

DraughtKeg™ reach the correct temperature.

2. Ensure DraughtKegTM is sufﬁciently chilled before pouring a draught beer.

Insufﬁciently chilled DraughtKegsTM will produce too much foam. It is ideal

to purchase the DraughtKegTM pre-chilled or pre-chill over night before

intended use.

If the DraughtKegTM needs additional chilling, there are 2 recommended

options:

a. Inside the BeerTender®– Depending on the temperature of the DraughtKegTM,

it will take up to 18 hours to chill to the ideal serving temperature.

b. In a refrigerator – Depending on the temperature of your refrigerator, it will

take up to 12 hours to chill to the ideal serving temperature.

Tip: We recommend that you always keep an extra DraughtKegTM in your

refrigerator to always have a chilled keg available.

PREPARING THE BEERTENDER®

IMPORTANT: It is important that the BeerTender®power switch is turned

on before inserting the DraughtKegTM.

nAfter setting up the BeerTender®and before use, it is vital to clean the

detachable pour spout – this is the only part of the appliance that will

come into contact with the beer. The spout should be rinsed by hand. After

cleaning, screw back into place - ﬁg. 5.

nBefore inserting the DraughtKegTM into the BeerTender®, simply snap

the patented disposable draught beer tube (5 tubes included) onto the

DraughtKegTM - ﬁg. 6.

nOpen the BeerTender®cover by pressing in the release panel on the top of

the machine and remove the tap spout cover - ﬁg. 7-8-9.

nPlace DraughtKegTM into BeerTender®- ﬁg. 10.

nPosition the draught beer tube as shown in drawing - ﬁg. 11-12.

nPut the tap spout cover back into place - ﬁg. 13.

nCarefully close the lid - ﬁg. 14.

nSet the drip tray and grate in place at the front of the appliance. Make sure

the drip tray is properly ﬁtted and positioned.

WARNING! The drip tray must be positioned on a level surface and must

not jut out from the surface it is resting on.

notice_krups_beertender_nafta.indd 6 10/08/10 11:49:11

English

CONTROL PANEL

nYour appliance features a display providing you with important and useful

information.

nTwo LEDs on the top of the lid provide important indications:

- Green (ON/OFF) LED on the left of the panel: when lit, it indicates that the

appliance is operating - ﬁg. 15.

- Green beer-temperature LED on the right side of the panel: when the

DraughtKegTM has reached the ideal temperature the LED switches on and

the appliance goes into “stand-by” cooling mode - ﬁg. 16.

WARNING: never use your BeerTender®with ambient temperature above

86°F. Above that level, the ideal serving temperature can not be attained.

POURING A BEER FROM THE BEERTENDER®

nBefore pouring a beer, rinse a clean glass in cold water which chills the

glass and wets the inside to enable a perfectly smooth draught pour. Use

of 8 oz glasses is recommended to maintain the ideal serving temperature

- ﬁg. 17.

DRAUGHT AND DRINK

nBe aware that the ﬁrst glass you pour from every new DraughtKegTM will

contain mostly foam. This is typical of draught beer. Allow the foam to settle

and continue to pour.

nTilt and pour: Tilt your glass at a 45 degree angle as you pour and adjust

upright as the glass ﬁlls - ﬁg. 18.

nEnsure you pull the tap handle all the way down. Not opening the handle all

the way will result in excessive foam.

nFor the optimal draught beer drinking experience, serve your beer with a

foam head of 2 ﬁngers in height (approximately 1.5”).

PROPER CARE AND CLEANING OF YOUR BEERTENDER®

nThe drip tray and grate should be emptied and cleaned after each use

- ﬁg. 19.

nBefore cleaning the appliance, it is essential to turn off the ON/OFF switch

and then pull the plug out of the socket.

nKeep in mind that during use the drip tray will have to be emptied and rinsed

regularly. The tray and grate are dishwasher safe or can be washed by hand

with a mild detergent. Dry completely.

nAlways wipe down the interior of the BeerTender®after use - ﬁg. 20. Beer

is a natural product that can spoil. Therefore, you should always keep the

appliance clean to maintain the quality of the beer dispensed and avoid

unpleasant odors.

notice_krups_beertender_nafta.indd 7 10/08/10 11:49:12

English

nRinse the pour spout between uses for optimal results. Handwash with

warm soapy water. Do not wash in dishwasher - ﬁg. 21.

nTo remove, unscrew turning counterclockwise from main unit. To re-attach,

simply screw back in place turning clockwise.

nYou should never attempt to access internal parts of the appliance.

IMPORTANT: After cleaning, ensure all parts of your BeerTender®have

completely dried before closing the lid.

STORING THE BEERTENDER®

nWhen the BeerTender®is not being used for a long period of time, remove

the DraughtKegTM and turn the control to “off”.

nRemove the plug from the power outlet.

nStore the BeerTender®at room temperature in a dry place out of children’s

reach.

nProtect from dust and dirt.

TROUBLESHOOTING

Problem Possible causes Remedies

The appliance does not

come on. The appliance is not

connected to the outlet. Connect the appliance

to the outlet.

You cannot position the

tap cover correctly. You may have opened

the draught beer tube

(white plastic part at

the end of the serving

tube) by hand. If so, the

tap cover will not close

correctly and there is

a risk for the beer to

ﬂow out.

Before installing the

draught beer tube

onto the BeerTender®

tapping mechanism,

make sure that the

draught beer tube is

closed.

The DraughtKegTM tap

or tube is not inserted

correctly.

If the draught beer

tube is not installed

properly in the tapping

mechanism or if the

tube is pinched, this

will affect the beer ﬂow.

Please refer to Section:

Using the BeerTender®

System to check that

you have properly set

up the BeerTender®.

notice_krups_beertender_nafta.indd 8 10/08/10 11:49:12

This manual suits for next models

Table of contents

Languages:

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions