- 8 -
Instruction Manual
GAS CYLINDER SAFETY INFORMATION
GAS TYPE
Note the labelling of appropriate gases listed on
your Pizza Oven and ascertain that the gas you
have is suitable for your Pizza Oven. Be aware
that several dierent valves for gas cylinders
exist, and that the regulator must connect
appropriately to your gas cylinder.
GAS CONNECTION
• Never try forcing the gas cylinder valve to t
the gas regulator.
• Never make adjustments to low-pressure
regulator and hose coupling.
• The gas hose must be inspected for signs of
damage/leakage prior to being used. If any of
these parts are being replaced, use only parts
specied by the manufacturer.
• The regulator and gas hose should be secured
by using hose clamps, which are tightened
with the use of a screw driver.
• Do not secure any attachments with tape,
or similar materials not meant for gas
applications.
• When the gas cylinder is not in use, it must be
turned o and disconnecting the regulator is
advisable.
HOSE AND REGULATOR REPLACEMENT
In the case of a problem arising with the hose
and regulator please contact your Pizza Oven
supplier for a list of approved replacement
parts. The hose and regulator assembly parts
must comply to CE gas standards.
GAS CYLINDER STORAGE
Gas cylinder not in use are to be stored
outdoors in a well ventilated place, out of reach
from children. Make sure that the gas cylinder is
placed in an upright position and on an evenly
surfaced ground. Additional gas cylinder are
not to be stored underneath or in proximity to
the Pizza Oven.
SAFETY WHEN LEAKAGE OF GAS IS
SUSPECTED
• Turn o the Pizza Oven’s gas supply and
disconnect the regulator from the gas
cylinder.
• Wipe out any open ames and remove
possible ignition sources. If the smell of gas is
sustained, please contact your gas supplier or
the re department immediately.
• If the gas cylinder appears to be the source of
smell/leakage, place this outdoor with good
ventilation and away from possible ignition
sources
