Fac F250 TS-V User manual
100% Made in Italy
1 F250 TS-V - F300TS-VR
2F250 TC-V - F300 TC-VR
3F300 TS-VL - F330 TS-VL - F350 TS-VL - F370 TS-VL
4F300 TC-VL - F330 TC-VL - F350 TC-VL - F370 TC-VL
1 2 3 4
EC Professional Vertical Electrical Slicers
EN
USE AND MAINTENANCE MANUAL
FAC SRL
macchine affettatrici industriali e familiari
Via Morazzone, 137 - 21044 CAVARIA (VA)
Tel. +39 0331 212252 - Fax. +39 0331 216443
www.slicers.it
100% MADE IN ITALY 100%
100% Made in Italy
1 F250 TS-V - F300TS-VR
2F250 TC-V - F300 TC-VR
3F300 TS-VL - F330 TS-VL - F350 TS-VL - F370 TS-VL
4F300 TC-VL - F330 TC-VL - F350 TC-VL - F370 TC-VL
1 2 3 4
EC Professional Vertical Electrical Slicers
EN
USE AND MAINTENANCE MANUAL
3
EN
• USER NOTE ................................................................................................................ Pag. 3
• GENERAL WARNINGS................................................................................................ Pag. 4
• USE WARNINGS ......................................................................................................... Pag. 9
• MANUFACTURER’S WARRANTY AND RESPONSIBILITIES ................................... Pag. 10
• PACKING..................................................................................................................... Pag. 11
• NAMEPLATES - CONFORMITY MARKINGS ............................................................. Pag. 12
• SUPPLIED ACCESSORIES........................................................................................ Pag. 13
• TECHNICAL DESCRIPTION AND INTENDED USE .................................................. Pag. 14
• ELECTRICAL AND MECHANICAL SAFETY DEVICES.............................................. Pag. 15
• MAIN TECHNICAL DATA ............................................................................................ Pag. 16
• MAIN COMPONENTS................................................................................................. Pag. 19
• INSTALLATION AND PRELIMINARY CHECKS.......................................................... Pag. 22
• USING THE MACHINE ............................................................................................... Pag. 24
• SLICER CLEANING .................................................................................................... Pag. 29
• MAINTENANCE .......................................................................................................... Pag. 40
• MOTOR BELT TENSION ADJUSTMENT.................................................................... Pag. 45
• TAKING THE SLICER OUT OF SERVICE.................................................................. Pag. 46
• TROUBLESHOOTING ................................................................................................ Pag. 47
• ELECTRICAL SCHEMES............................................................................................ Pag. 49
• SPARE PARTS............................................................................................................ Pag. 51
•
MOCA DECLARATION
.................................................................................................. Pag. 60
• DECLARATION OF CONFORMITY ............................................................................ Pag. 67
USER NOTE
This publication shall consist of n°72 pages as specied below:
• Title page with Notes for the User (no print back);
• Index of contents, pag. 3;
• From pag. 3 to pag. 67: progressive numeration.
The manufacturer reserves its right to bring changes to the information indicated in the manual
without the obligation to communicate it in advance, as long as they don’t alter safety.
INDEX
4
GENERAL WARNINGSGENERAL WARNINGS
EN
Meaning of warning signs found in booklet
DANGER: Indicates an imminently hazardous situation
which, if not avoided, could result in serious injury
or even death. The use of this term is limited to the
most extreme situations.
ATTENTION: Indicates a potentially hazardous situation
which, if not avoided, could result in serious injury
(and in extreme cases death).
WARNING: Indicates a potentially hazardous situation
which, if not avoided, may result in minor injuries
to personnel or damage to equipment. It also alerts
the user on incorrect operating modes.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Safety warnings
indispensable before use
Carefully read the warnings contained in these instructions
since they supply important safety, use and maintenance
indications of the vertical slicing machines for food use.
The purpose of this publication, simply dened ‘manual’ below, is to
allow the user, especially to the direct operator to take every measure
and to prepare all the necessary human and material resources for
a safe and durable use of the. This booklet MUST be kept for all the
slicer lifetime and in case of need (example: damage tampering even
partially its consultation, etc.) the user must ask for a new copy to
the manufacturer.
☞
5
GENERAL WARNINGSGENERAL WARNINGS
EN
In case of sale of the slicer, deliver to the new owner this manual too.
☞
The installation must be performed following the instructions
of the manufacturer. A wrong installation can cause damages
to people, animals or things, in respect of which the
manufacturer cannot be considered responsible.
Children should not use the device as a
toy and should neither clean nor use the
equipment.
Keep away the children form the device and the power
cord.
The appliance must be used by adults adequately trained
for the purpose who have carefully red the content of this
manual.
• The elements of the packing (plastic bags, expanded polystyrene, etc.)
must be kept out of reach of children as they are potential sources of
danger.
The electrical safety of this device is ensured only when it’s
correctly connected to an efcient grounding installation
in accordance with the electrical safety standards in force.
• It’s necessary to verify this fundamental safety requirement and, in case
of doubt, ask for an accurate installation safety control by professionally
qualied personnel.
The manufacturer cannot be considered responsible for any
damage caused by lack of installation’s grounding.
6
GENERAL WARNINGSGENERAL WARNINGS
EN
• Before plugging the appliance make sure that the data on the label
correspond to those of the electrical distribution network.
• The plate is on the bottom of the appliance.
•
For your safety, it is recommended to power the device through a circuit
breaker (DRC) with trip current not exceeding 30 mA.
• In case of incompatibility between the socket and the plug of the
appliance have the die-cast wire and plug with another one suitable
by an authorized retailer. In case of tampering the manufacturer
doesn’t answer neither for safety, nor for warranty. Alternatively have
the socket replaced with a suitable type by a qualied professional.
The latter, in particular, will also have to ensure that the section of the
socket cables is suitable for the power absorbed by the appliance.
In general it is not advisable to use adapters, multiple sockets and/or
extensions.
• Do not connect the appliance to the electrical power through external
timers or remote operating systems.
• The use of any electrical appliance requires the observance of some
basic rules. in particular:
- do not touch the appliance with wet hands
- do not use the appliance barefoot
- do not pull the power cord or the appliance itself to remove the plug
from the socket
-
do not leave the appliance exposed to atmospheric agents (rain, sun,
etc.)
- do not move the appliance when is running.
- the appliance was not designed to be used under rain and must not
be deposited outdoor or in damp places.
• In case of failure and/or malfunction of the appliance, turn it off and
don’t tamper it.
For repairs apply only to the manufacturer or to a service centre
authorized by the same and require the use of genuine spare parts.
Failure to comply with the above may compromise the security of the
device.
7
GENERAL WARNINGSGENERAL WARNINGS
EN
• If you decide not to use a device of this type any more, it must be
made inoperative by cutting the power cord after removing the plug
from the socket.
It is also recommended to make harmless those parts of the equipment
which may constitute a danger, especially for children who might use
an abandoned appliance for their games.
• To avoid dangerous overheating, it is recommended to extend the
power cord to its full length and use the appliance as recommended
in “USING THE MACHINE”.
☞
During the functioning, the socket must be easily accesible
in the event that becomes necessary to unplug the appliance.
Do not place the appliance under a socket so that the wire
doesn’t interfere with the correct use of the machine.
• Do not leave the appliance plugged in unnecessarily. Unplug it from
the power supply when the device is not used.
• After use, always switch off the unit and remove the plug from the
socket.
•
After each use, always perform a thorough cleaning of all parts in contact
with food, as mentioned under “Cleaning the slicer”.
• Do not block the openings, ventilation or heat dissipation slots.
• If the power cord of this appliance is damaged, it must be replaced
by a service centre authorized by the manufacturer, as special tools
are required.
Before performing a by operation turn off the appliance
and disconnect the power plug from the socket.
☞
Make sure the power cord does not protrude from the oor
to avoid that someone can pull it also inadvertently knocking
the appliance.
8
GENERAL WARNINGSGENERAL WARNINGS
IT
☞
Place the appliance on a horizontal and rm supporting plane,
whose surface is not sensitive (eg. Lacquered furniture,
tablecloths etc.). Make sure that the appliance is safely
supported.
☞
Do not place the appliance on or near heat sources.
Place the appliance far from sinks and faucets.
☞
The blades are sharp; handle with care.
Do not use the appliance if the blades are damaged.
☞
Never immerse the appliance in water.
☞
Do not use the appliance in environments containing explosive,
combustible gases or ammable liquids (paints, glues, spray cans,
etc.).
DANGER OF EXPLOSION AND FIRE
.
• This device is intended for domestic and professional use.
☞
This appliance must be used only for the purpose for which
it was designed, that is for slicing food products (see page
15) in respect to the directives and regulations reported in
the declaration of conformity (see next to last page).
Do not remove safety devices and do not alter or remove
mechanical and electrical guards.
☞
Always use protective scratch-proof gloves for cleaning and
maintenance.
☞
Do not operate the empty appliance.
This manual suits for next models
11
Table of contents
Other Fac Kitchen Appliance manuals
Popular Kitchen Appliance manuals by other brands
Tayama
Tayama TYG-35AF instruction manual
AEG
AEG 43172V-MN user manual
REBER
REBER Professional 40 Use and maintenance
North American
North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions
Presto
Presto fountain popper instruction manual
Westmark
Westmark 1035 2260 operating instructions
