EdgeStar KC2000SSTWIN User manual

Beer Dispenser

Dual-tap Tower Installation Guide

For more information on other great EdgeStar products on the web, go to http://www.edgestar.com

Models:

KC2000TWIN, KC2000SSTWIN

Introduction

Thank you for choosing EdgeStar. This guide is a supplement to the EdgeStar Beer

Dispenser Guide for your KC2000TWIN or KC2000SSTWIN EdgeStar Full Size Dual Tap

Kegerator & Draft Beer Dispenser. Please follow the EdgeStar Beer Dispenser Guide for

step-by-step instructions.

You may download the latest guide at <http://www.edgestar.com/support/>

Parts Identification

1. 3” Double Tower and Gasket

2. Singe Gauge Regulator

3. Five Pound CO2 Tank with 1 ¾” threads (Supplied empty)

4. 2 American Sankey Keg Couplers

5. 2 Faucets and 2 Handles

6. 2 Four Feet CO2 Hoses (One hose may be precut)

7. CO2 Manifold

8. Set of Bolts, Washers, Hex Nuts to secure tower

9. 6 Snap Clamps for CO2 Hoses

10. Rail (not pictured)

11. 4 Caster wheels and 2 washers (not pictured)

12. Refrigerator (not pictured)

13. Drip Tray

123456789

All the pictures in this manual are for reference

only. Your unit may be slightly different than the

images depicted. Parts included may be subject

to change.

Quick Overview Diagram

The image below should give you a visual reference on setting up your Kegerator.

Install and Secure the Tower

1. Remove the plastic plug from the top of the cabinet by opening the door and pushing up.

2. Place the rubber gasket on the cabinet and align the holes. (Note: Some models may

require you drill holes on the top of the unit.)

3. Unravel the beer line from the inside of the tower and pass it through the rubber gasket

and the hole on the top of the beer refrigerator.

4. Place the tower facing forward and insert the bolts through top of the cabinet.

5. Insert a washer through a bolt and fasten a hex nut. Repeat the process for all bolts.

Drilling holes on the top of the cabinet (If necessary)

51/8”

51/8”

Back of Unit

Rubber Gasket

1. Use the rubber gasket as a template to mark the holes. Center the gasket over the

center hole. The rear holes need to be 5 1/8th from the back of the unit. Mark the holes with

a marker.

2. Remove the gasket, then use a 13/64th” drill bit to drill the holes.

This manual suits for next models

1

Table of contents

Other EdgeStar Kitchen Appliance manuals

EdgeStar

EdgeStar CWR1553DD User manual

EdgeStar

EdgeStar CWR1660SZ User manual

EdgeStar

EdgeStar KC3000 User manual

EdgeStar

EdgeStar TWR120 User manual

EdgeStar

EdgeStar CWR1552DZ User manual

EdgeStar

EdgeStar CWR263DZ User manual

EdgeStar

EdgeStar KC2000TWIN User manual

EdgeStar

EdgeStar BBR901BL User manual

EdgeStar

EdgeStar Wine Cooler TWR215ESS User manual

EdgeStar

EdgeStar CWR1432TZ User manual

EdgeStar

EdgeStar TWR210EBL User manual

EdgeStar

EdgeStar CWR532SZ User manual

EdgeStar

EdgeStar TWR121ES User manual

EdgeStar

EdgeStar KC1000 User manual

EdgeStar

EdgeStar BWR301BL User manual

EdgeStar

EdgeStar BWC71SS User manual

EdgeStar

EdgeStar CWR261DZ User manual

EdgeStar

EdgeStar TWR320E User manual

EdgeStar

EdgeStar CBR1500SG User manual

EdgeStar

EdgeStar TWR282S User manual

EdgeStar

EdgeStar TWR181ES Use and care manual

EdgeStar

EdgeStar CWB7016DZ User manual

EdgeStar

EdgeStar CWR5631FD User manual

EdgeStar

EdgeStar TWR282S User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Philips

Philips HD3133 user manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions