Doyon DL12S User manual
DOUGH SHEETER
DL12S & DL18S
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TABLE OF CONTENTS
SECTION « A » DESCRIPTION PAGE
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A4
Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A4
Foot Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A5
For more information, please call our office: . . . . . . . . . . . . . . . . . . . . . . . A6
SECTION « B » DIMENSIONS
DL12S 3D DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1
DL12S FRONT & SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2
DL18S 3D DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3
DL18S- FRONT & SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B4
SECTION « E » COMPONENT PARTS
DL12S- COMPONENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E1
DL18S- COMPONENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E3
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DL12S&DL18S-A.DOC Rev. 05/2007
A1
CAUTION
READ ALL INSTRUCTIONS
INTRODUCTION
This dough sheeter is manufactured with first quality material by experienced technicians. Proper
installation and maintenance will guarantee a reliable service for years to come.
A nameplate specifies the model number, serial number, voltage, amperage, frequency and
manufacturing date.
Drawings, electrical diagram and replacement part numbers are included in this manual.
WARNING
DOYON is not responsible for damages to the property or the equipment caused
by personnel who is not certified by known organisations.
A2
SHIPPING
For your safety, this equipment has been verified by qualified technicians and carefully crated before
shipment. The freight company assumes full responsibility concerning the delivery in good condition
of the equipment in accepting to transport it.
IMPORTANT
RECEPTION OF THE MERCHANDISE
Take care to verify that the received equipment is not damaged before signing the delivery receipt. If
a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier has
left, contact immediately the freight company in order for them to their inspection.
We do not assume the responsibility for damages or losses that may occur during transportation.
IN GENERAL
Take off the packaging material with care. Take off all the material used for packing and
accessories.
This equipment can be plugged on any network offering a protection of 15 amps.
INSTALLATION WARNINGS
INSTALLATION AND SERVICE
The dough sheeter must be connected to the utility and electrically grounded in conformity to the
effective local regulations. If these are not established, the dough sheeter must be connected
according to the National Electrical Code (NFPA 70-XX). This equipment has a male plug that
meets those requirements.
A3
IMPORTANT SAFEGUARDS
Read all instructions.
Do not use outdoors.
Do not let cord hang over edge of table or counter or touch hot surfaces.
Save these instructions.
To protect against electrical shock, do not immerse cord, plugs, portable appliance in water or
other liquids.
Remove plug from the outlet when the appliance is not in use, before putting on or taking off
parts, and before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or is dropped or damaged in any manner. Return appliance to the nearest authorized service
facility for examination, repair or electrical or mechanical adjustment.
Do not place on or near a hot gas or electric burner or in a heated oven.
The use of accessory attachments not recommended by the appliance manufacturer may cause
injuries.
Always check if the control switch is OFF before plugging cord into wall outlet. To disconnect,
turn the control switch to OFF, then remove plug from wall outlet.
Do not use appliance for other than intended use.
Avoid contacting moving parts.
A4
DL12S OPERATION
1Press the green button to start the machine. (A pilot light will light up when the machine is on.)
2Adjust the opening of the roller to obtain the desired dough thickness.
3Put some flour in the chute and on the rollers to prevent the dough from sticking on the rollers.
4Flatten the dough ball with your hands before.
5Cover the dough with flour.
6Put the dough in the chute.
7When the dough comes out of the rollers, finish it manually at desired size, or do a second pass
in the roller to have a round shape if needed.
8To stop the machine, press the red button.
DL18S OPERATION
1Press the green button to start the machine. (A pilot light will light up when the machine is on.)
2Adjust the opening of the roller to obtain the desired dough thickness.
3Put some flour in the chute and on the rollers to prevent the dough from sticking on the rollers.
4Flatten the dough ball with the hands before.
5Cover the dough with flour.
6Put the dough in the chute.
7When the dough comes out of the first set of rollers, guide the dough with your hand to the second
set of rollers to obtain a round shape when the dough comes out of the second set of rollers.
8When the dough comes out, finish it manually at desired size, if needed.
9To stop the machine press the red button.
WARNING
Never remove the safety guard on the machine. Never try to push or remove the dough from
the rollers with your hands. Always turn off the power on the machine before cleaning or
trying to take out some dough.
MAINTENANCE AND CLEANING
Remove the plastic security cover on the rollers to clean the rollers.
Clean the machine with a brush or a vacuum to take out the excess flour. Remove stain with soap
and water.
A5
FOOT PEDAL ( optional)
The pedal connects by a special non-invertible tri-polar connector to the
electric/electronic circuit (low voltage) of the rolling machine.
After connecting the pedal control to the rolling machine, it is always
necessary to press the green start button to confirm the operation. The
machine is now ready and when the pedal is pressed one gives the start
command to release the stop. The socket next to the machine has been
positioned to protect it from blows; disconnection of the plug from the
socket during operation will cause the machine to stop.
A6
FOR MORE INFORMATION,
PLEASE CONTACT OUR OFFICE:
DOYON EQUIPMENT INC.
1255, rue Principale
Linière, Qc, Canada G0M 1J0
Tel. : 1 (418) 685-3431
Canada : 1 (800) 463-1636
U.S. : 1 (800) 463-4273
FAX : 1 (418) 685-3948
Internet: http://www.doyon.qc.ca
SECTION
B
DIMENSIONS
B1
G:\ACAD10\DL12\DL12S.dft
DL12S
B2
G:\ACAD10\DL12\DL12S.dft
DL12S
16 7/8
12 1/8
18 1/8
13
15
17 5/8
This manual suits for next models
1
Table of contents
Other Doyon Kitchen Appliance manuals
Popular Kitchen Appliance manuals by other brands
Tayama
Tayama TYG-35AF instruction manual
AEG
AEG 43172V-MN user manual
REBER
REBER Professional 40 Use and maintenance
North American
North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions
Presto
Presto fountain popper instruction manual
Westmark
Westmark 1035 2260 operating instructions
