Coline LW-6109-UK Quick setup guide
ENGLISHSVENSKANORSKSUOMI
DEUTSCH
Meat Mincer
Ver. 20130418
Köttkvarn • Kjøttkvern
Lihamylly • Fleischwolf
English 2
Svenska 8
Norsk 14
Suomi 20
Deutsch 26
Art. No.: Model. No:
18-4517 LW-6109-UK
34-1382 LW-6109
ENGLISH
2
Meat Mincer
Art.no 18-4517 Model LW-6109-UK
34-1382 LW-6109
Please read theentire instruction manual before using theproduct and then save
it for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact our Customer Services.
Safety
• Never use theproduct for longer than 3 minutes at atime. Switchtheproduct off
and let themotor cool down for aminute before using itagain.
• Incorrect handling of this product could result in personal injury.
• Great care should be exercised when handling and cleaning theblade.
• The product should always be disconnected from themains when it is not in use,
when it is to be assembled/disassembled and when it is to be cleaned.
• The product must not be used by children. Ensurethat theproduct and its mains
lead are kept out of children’sreach.
• Wash thehopper plate, housing, cutting blade, discs, feed screw and other parts
in warm soapywater.
• Switch theproduct off and disconnect it from themains before removing theblade
or any of themoving parts.
• The product may be used by persons with reduced physical, sensory or mental
capability, lack of experience or knowledge which could otherwise jeopardize
their safety, provided they have been given supervision or instruction concerning
thesafe use of theproduct and understand thehazards involved.
• Never let children play with theproduct.
• Ensure that theproduct is used with thecorrect voltage. Referto theproduct’s
rating plate.
• Always remove thehousing from themotor unit before cleaning. Theblade is extremely
sharp and could cause serious personal injury if theproduct were to start accidentally.
• To prevent electric shocks, theproduct and its mains lead should be keptdry.
• Never lay themains lead over hot surfaces, sharp edges or corners.
• Always disconnect theproduct from thepower supply by holding and pulling
theplug. Donot pull themainslead.
• Make sure that all parts are correctly assembled and that theproduct is switched
off before it is connected to thepower supply.
• Never operate theproduct without food in thebowl.
• Never use theproduct close to heat sources.
• Only use theprovided accessories.
• Never use theproduct for anything other than its intended use.
• The mains lead should be checked regularly. Neveruse theproduct if themains
lead or plug is damaged.
ENGLISH
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
• The mains lead must be changed if damaged. Thisis to prevent therisk of electric
shock or fire and should only be carried out by themanufacturer, qualified service
facility or qualified technician.
Warning!
• Forreasons of safety, theproduct must never be connected to atimer so that it
can come on automatically.
• Ifthemotor is stopped and the[REV] button is pressed, themotor will run in
reverse for as long as thebutton is held down. Themotor will run as normal again
once thereverse button has been released.
Product description
1. Foodpusher
2. Hopperplate
3. Housing
4. [
] Housing release button
5. Indicator lamp
6. [REV] Temporary stop/reverse button
7. [ON/OFF] Power switch
8. Motorunit
9. Finemincing disc
10. Mediummincing disc
11. Feedscrew
12. Cutting blade
13. Coarsemincing disc
14. Locking ring
15. Separator
16. Sausage funnel
17. Kebbeattachment
18. Cone
ENGLISH
4
Assembly and use
Mincing
• Do not attempt to mince frozen meat, let it thawfirst.
• Cut themeat into 10 cm long and 2 cm thick pieces.
• Remove as much bone, gristle and sinew as possible before mincing.
1. Fitthefeed screw into
thehousing.
2. Fitthecutting blade onto
thesquare end of thefeed
screw, edge outwards.
3. Fitasuitable mincingdisc
onto thefeed screw
in front of thecutting
blade. Note:Thenotch
in thecutting disc must
fit into theprotrusion on
thehousing.
4. Screwthelocking
ring onto
thehousing, but
do not tighten it
completely.
6. Tighten thelocking ring.5. Inserttherear end of thehousing
into themotor unit with thefeed
opening slightly tilted to
theright (one o’clock position).
Twistthehousing anticlockwise,
so that thefeed opening is vertical
(12 o’clock) and the[
] locks
thehousing inplace.
7. Fitthehopper plate onto thehousing.
ENGLISH
5
8. Placethemeat onto thehopper plate.
9. Startthemotor by pressing [ON/OFF].
10. Pushthemeat down into thehousing using thefood pusher.
11. Ifnecessary, reverse themotor like this: Firstpress [ON/OFF] to switch themotor
off, then press [REV] to reverse themotor.
12. Press[ON/OFF] to switch themotor on again and resume mincing.
Making sausages
1. Fitthefeed screw into thehousing.
2. Placetheseparator onto
thesquare shank of thefeed screw.
Note:Thenotch in theseparator
must fit into theprotrusion on
thehousing.
3. Placethesausage funnel onto
theseparator.
4. Screwthelocking ring onto
thehousing, but do not tighten
itcompletely.
5. Inserttherear end of thehousing
into themotor unit with thefeed
opening slightly tilted to
theright (one o’clock position).
Twistthehousing anticlockwise,
so that thefeed opening is vertical
(12 o’clock) and the[
] locks
thehousing inplace.
6. Tighten thelocking ring.
7. Fitthehopper plate onto thehousing.
8. Placeall theingredients onto thehopper plate.
9. Soakthesausage skin in warm water for about 10 minutes. Oncesoaked,
slidethesausage skin onto thefunnel.
10. Startthemotor by pressing [ON/OFF].
11. Carefully feed thesausage meat into thehousing using thefood pusher.
If thesausage skin sticks to thefunnel, wet it with some warmwater.
ENGLISH
6
Using the Kebbe attachment
1. Fitthefeed screw into thehousing.
2. FittheKebbe attachment onto
thesquare shank of thefeed screw.
Note:Thenotch in theKebbe
attachment must fit into theprotrusion
on thehousing.
3. Fitthecone onto end of
thefeedscrew.
4. Screwthelocking ring onto
thehousing, but do not tighten
itcompletely.
5. Inserttherear end of thehousing
into themotor unit with thefeed
opening slightly tilted to theright (one
o’clock position). Twistthehousing
anticlockwise, so that thefeed opening
is vertical (12 o’clock) and the[
]
locks thehousing inplace.
6. Tighten thelocking ring.
7. Fitthehopper plate onto thehousing.
8. PlacetheKebbe mix onto thehopper plate.
9. Startthemotor by pressing [ON/OFF].
10. Carefully feed theKebbe mix into thehousing using thefood pusher.
Tips
• The mains lead can be tidied away under themotorunit.
• Reverse function: First press [ON/OFF] to switch themotor off, then press [REV]
to reverse themotor. Press[ON/OFF] to switch themotor on again and resume
mincing.
• Parts 15–18 can be stored inside thefood pusher.
ENGLISH
7
Cleaning
Unplug themains lead before cleaning theproduct.
Clean theoutside of theproduct using asoft, moist cloth. Useamild detergent and
never use solvents or strong, abrasive cleaning agents for cleaning as these can
damage theproduct.
Cleaning theparts which come into contact with foodstuffs:
1. Turnoff and unplug themeat mincer from thewall socket before cleaning it.
2. Holdin therelease button [] and twist thehousing clockwise until it comesfree.
3. Removethehopper plate and thefood pusher.
4. Removethelocking ring from theend of thehousing and take out theparts inside.
DoNOT put these parts in thedishwasher.
5. Washall parts which come into contact with foodstuffs in hot soapy water.
Cleanall parts immediately afteruse.
6. Rinseall parts in hot clean water and then dry them immediately.
7. Itis advisable to coat thecutting blade and all thediscs with vegetable oil.
Disposal
This product should be disposed of in accordance with local regulations.
Ifyou are unsure how to proceed, contact your local authority.
Specifications
Model LW-6109
Voltage 220–240 V, 50/60Hz
Power 800W
Size W×D×H 350×180×355 mm
SVENSKA
8
Köttkvarn
Art.nr 18-4517 Modell LW-6109-UK
34-1382 LW-6109
Läs igenom hela bruksanvisningen före användning och spara den sedan för fram-
tida bruk. Vireserverar oss för ev. text- och bildfel samt ändringar av tekniska data.
Vidtekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter
påbaksidan).
Säkerhet
• Använd aldrig produkten längre än 3 minuter åt gången. Stängav motorn och låt
den kylas ner någon minut innan du använder denigen.
• Felaktig användning av produkten kan medföra personskada.
• Var försiktig när du hanterar och rengör kniven.
• Koppla alltid bort produkten från elnätet när den inte används, när du monterar
ihop/isär delarna och när den ska rengöras.
• Produkten får inte användas av barn. Setill att produkten och dess nätsladd är
utom räckhåll förbarn.
• Diska tråg, kvarnhus, kniv, hålskivor, skruv och andra tillbehör med varmt vatten
och diskmedel.
• Slå av produkten och koppla bort den från elnätet innan du byter tillbehör eller
handskas med de rörliga delarna.
• Produkten får användas av personer med någon form av funktionsnedsättning,
brist på erfarenhet eller kunskap som skulle kunna äventyra säkerheten, om de har
fått instruktioner om hur den på ettsäkert sätt ska användas och förstår faror och
risker som kan uppkomma.
• Låt aldrig barn leka med produkten.
• Kontrollera att rätt nätspänning används. Seproduktens märkskylt.
• Ta bort kvarnhuset från motordelen före rengöring. Knivenär mycket vass och
kanorsaka personskada om produkten skulle startas oavsiktligt.
• För att undvika elektrisk stöt, skydda produkten och dess nätsladd från fukt
ochväta.
• Placera aldrig nätsladden över heta ytor, skarpa kanter ellerhörn.
• Koppla aldrig bort produkten från elnätet genom att dra inätsladden, dra alltid
istickproppen.
• Se till att produktens delar är korrekt monterade och att produkten är avstängd
före anslutning till elnätet.
• Använd aldrig produkten utan innehåll ibehållaren.
• Använd aldrig produkten inärheten av värmekällor.
• Använd endast medföljande tillbehör.
• Använd endast produkten till det den är avsedd för.
• Nätsladden bör regelbundet kontrolleras. Användaldrig produkten om nätsladden
eller stickproppen är skadade.
• Om nätsladden skadats får den, för att undvika risk för elektrisk stöt eller brand,
endast bytas av tillverkaren, dess serviceställe eller av enkvalificerad yrkesman.
SVENSKA
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Varning!
• För att undvika fara får produkten aldrig anslutas till entimer så att den kan startas
automatiskt.
• Om du stoppar motorn och trycker på [ REV ] för att backa, kommer motorn att gå
baklänges men återgår sedan till normal drift igen när du släpper knappen.
Produktbeskrivning
1. Påmatare
2. Tråg
3. Kvarnhus
4. [
] Frigöringsknapp till kvarnhus
5. Indikatorlampa
6. [REV] Temporär stopp-/backknapp
7. [ON/OFF] Strömbrytare på/av
8. Motorenhet
9. Hålskiva fin
10. Hålskiva medium
11. Skruv
12. Kniv
13. Hålskiva grov
14. Fästring
15. Separator
16. Korvhorn
17. Form
18. Kon
SVENSKA
10
Montering och användning
Malning
• Använd inte fruset kött, låt det tinaförst.
• Skär köttet ica 10 cm långa och 2 cm tjocka bitar.
• Ta bort så mycket ben, brosk och senor som möjligt innan malning.
1. För in skruven ikvarnhuset.
2. Placera kniven med
eggen utåt på skruvens
fyrkantsanhåll.
3. Placera lämplig hålskiva
på kniven. Obs!Urtaget
ihålskivan måste passas
in mot förhöjningen
ikvarnhuset.
4. Skruva fast
fästringen medurs
på kvarnhuset,
men skruva inte
åthelt.
6. Skruva åt fästringen.5. Tryck fast kvarnhuset
mot motorenheten med
inmatningsöppningen placerad
aningen till höger (motsv. klockan1).
Vridkvarnhuset moturs, rakt upp
(motsv.klockan 12) tills knappen
[
] låser fast kvarnhuset.
7. Sätt fast tråget ovanpå kvarnhuset.
This manual suits for next models
3
Table of contents
Languages:
Other Coline Kitchen Appliance manuals
Coline
Coline HB978 User manual
Coline
Coline PC323-UK User manual
Coline
Coline SC-35A-R-UK User manual
Coline
Coline LW-6108 User manual
Coline
Coline NT-0311-UK User manual
Coline
Coline 42810ON.CLAS User manual
Coline
Coline MC0135-UK User manual
Coline
Coline 34-1768 User manual
Coline
Coline XB523 User manual
Coline
Coline KR251250 User manual
Popular Kitchen Appliance manuals by other brands
Tayama
Tayama TYG-35AF instruction manual
AEG
AEG 43172V-MN user manual
REBER
REBER Professional 40 Use and maintenance
North American
North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions
Presto
Presto fountain popper instruction manual
Westmark
Westmark 1035 2260 operating instructions
