Clarke CBS4 User manual

3 IN 1 ROLLER STAND

MODEL No: CBS4

Part No: 6500958

ASSEMBLY

INSTRUCTIONS

1108

2

INTRODUCTION

Thank you for purchasing this CLARKE 3 in 1 roller stand.

Before using the roller stand, please read this instruction manual thoroughly

and carefully follow all directions given. This is for your own safety and for

that of others around you, and will also help you achieve long and trouble

free service from your roller stand.

GUARANTEE

• This product is guaranteed against faulty manufacture for a period

of 12 months. Please keep your receipt as proof of purchase.

• This guarantee is invalid if the product is found to have been

abused or tampered with in any way, or not used for the purpose

for which it was intended.

• Faulty goods should be returned to their place of purchase, no

product can be returned to us without prior permission.

• This guarantee does not effect your statutory rights.

ASSEMBLY

1. Remove the roller stand from the box.

2. Open the legs of the stand as shown

on the right.

• The legs must be fully opened

before the roller stand is used

3

ADJUSTMENTS

ADJUSTING THE HEIGHT

1. Rotate the handle anticlockwise until

it is loose.

2. Lift the roller head to the desired

height.

• Minimum height is 700 mm

• Maximum height is 1100 mm

3. Rotate the handle clockwise to lock

the roller into position.

MAXIMUM WEIGHT CAPACITY

The weight capacity of this unit varies according to the height of the roller.

• Height is set to minimum Maximum load = 90 kg

• Height is set to mid way Maximum load = 60 kg

• Height is set to maximum Maximum load = 45 kg

USING THE ROLLER STAND

When feeding the workpiece over the

roller stand, always feed it from the rear

of the stand as shown on the right, this

will increase the stability of the stand.

CONFIGURATION

There are 3 configurations in which you

can use this roller stand, simply rotate the

head to the required configuration.

ROLLER CONFIGURATION:

Allows the workpiece to be moved

along one plane

BALL ROLLER CONFIGURATION:

Allows the workpiece to be moved

along two planes

STAND CONFIGURATION:

Provides basic support of the workpiece

Handle

This manual suits for next models

1

Table of contents

Other Clarke Tools manuals

Clarke

Clarke CAR8P User manual

Clarke

Clarke Strong-Arm CFB600 User manual

Clarke

Clarke CAT66 User manual

Clarke

Clarke Metalworker CPTN1 Instruction Manual

Clarke

Clarke METALWORKER CMSSCS User manual

Clarke

Clarke CHT204 User manual

Clarke

Clarke CAT33B Installation and operation manual

Clarke

Clarke KIT700 Instruction Manual

Clarke

Clarke CHT172 User manual

Clarke

Clarke CHT 455 User manual

Clarke

Clarke CEA150 Installation and operation manual

Clarke

Clarke IT1500 Instruction Manual

Clarke

Clarke CHT637 Installation and operation manual

Clarke

Clarke CSB20B User manual

Clarke

Clarke CRT 40 User manual

Clarke

Clarke CONTRACTOR CLJ120 Instruction Manual

Clarke

Clarke CDTJ12 Instruction Manual

Clarke

Clarke CMFT250 Instruction Manual

Clarke

Clarke TPG30P User manual

Clarke

Clarke Air CHR9P User manual

Clarke

Clarke CAT120 Instruction Manual

Clarke

Clarke METALWORKER CTR1 Instruction Manual

Clarke

Clarke CMC36B User manual

Clarke

Clarke CAT151 Installation and operation manual

Popular Tools manuals by other brands

Martor

Martor SECUNORM 175 quick start guide

ERKCO

ERKCO 1000 user manual

jbc

jbc N4473 instruction manual

FEINMETALL

FEINMETALL FZWZ-SET-001 quick start guide

Worx Professional

Worx Professional Sonicrafter WU676 Original instructions

Gage Bilt

Gage Bilt GB713SH Original instructions

Hilti

Hilti DX 9-ENP Original operating instructions

norbar

norbar NORTRONIC 34399 Operator's manual

BGS technic

BGS technic 8578 manual

Makita

Makita DHR241 instruction manual

Motor Guard

Motor Guard JMB-1250 instructions

Power Adhesives

Power Adhesives 805-12 operating instructions

Clemco

Clemco 24189 quick start guide

VVG

VVG VNG 903 Series instruction manual

Hilti

Hilti FX 3-A operating instructions

Grizzly

Grizzly H6472 Manual insert

axing

axing BWZ 5-02 Operation instructions

Dh-Robotics

Dh-Robotics RGI-100 Short manual