Cisco LINKSYS WUSB300N User manual

Wireless-N

USB Network Adapter

Model No: WUSB300N

QUICK INSTALLATION

Package Contents

Wireless-N USB Network Adapter

Setup Wizard CD-ROM

User Guide on CD-ROM

Quick Installation

•

INSTRUCTIONS FOR

WINDOWS VISTA™

USERS ONLY

The Adapter is installed and set up using the Setup Wizard that is on the

enclosed Setup Wizard CD.

This Quick Installation is for Windows Vista users only. If you have Windows

XP or 2000, use the other enclosed Quick Installation.

IMPORTANT: Do not install the Adapter in your PC until you are

instructed to do so or the Adapter will not install correctly.

Insert the Setup Wizard CD into

your CD-ROM drive.

NOTE: Windows Vista or other personal rewalls may ask for

permission to run the software or program. You will need to allow

the software to run in order to continue.

The Welcome screen appears on

your monitor.

Click the Click Here to Start

button.

Installation1�

Read the License Agreement

and click Next to continue the

installation.

Locate an available USB port on

your PC. Connect the Adapter in

one of three ways:

Insert the Adapter into the USB

port.

If you want to use the included USB

Extension Base, first connect the

USB Extension Base to the USB port

on the PC, then insert the Adapter

into the USB port on the Base.

If you want to use the included

USB Extension Cable, connect the

Adapter to the female end of the

USB Extension Cable, then connect

the male end of the Cable to the PC.

After you install the Adapter

correctly, the Congratulations

screen appears.

Click Finish.

The first Windows Vista Wireless

Network Configuration utility

screen appears. Select your

network, then click Connect.

If your network has no wireless

security, this screen appears. If your

network has wireless security, go to

step H.

To continue to your unsecured

network, click Connect Anyway

and go to step I.

If your network has wireless

security, this screen appears. Enter

the security key or passphrase (also

known as pre-shared key or WEP

key, depending on your type of

security).

Click Connect.

This screen appears while the

Adapter connects to your network.

Do not cancel, unless you want to

end the installation.

This screen appears when you are

connected to your network.

Select Save this Network, if you

want to save your settings.

Click Close.

The Network Location screen may

appear to help apply the correct

settings for your type of location. If

it doesn’t appear, go to step M.

Select from Home, Work, or Public

location.

Website

http://www.linksys.com/international

For additional information or troubleshooting help, refer to the User Guide on the CD-ROM.

Additional support is also available via e-mail or by phone.

Linksys is a registered trademark or trademark of Cisco Systems,Inc.and/or its

trademarks of their respective holders.

Product Registration

http://www.linksys.com/registration

7073010NC-JL

This screen varies according to the

selected location.

Click Close.

The Windows Vista Wireless

Network Configuration utility

appears on your desktop’s system

tray.

You can use this utility to configure

or change your wireless settings.

NOTE: For help with the Windows Vista Wireless Network

Configuration utility, refer to Windows Vista Help and Support, by

clicking Vista’s Start button > Help and Support.

Installation is complete!

Trådløs-N

USB-netværkskort

Modelnr.: WUSB300N

INSTALLATIONSVEJLEDNING

Pakkens indhold

Trådløs-N USB-netværkskort

Cd-rom med guidet konfiguration

Brugervejledning på cd-rom

Installationsvejledning

•

VEJLEDNING KUN TIL

WINDOWS VISTA™-

BRUGERE

Netværkskortet installeres og konfigureres ved hjælp af den guidede

konfiguration på cd’en Setup Wizard, som medfølger.

Denne installationsvejledning er kun til Windows Vista-brugere. Hvis

du har Windows XP eller 2000, skal du bruge den anden medfølgende

installationsvejledning.

VIGTIGT: Installer ikke netværkskortet på din pc, før du bliver

bedt om det - ellers installeres netværkskortet ikke korrekt.

Placer cd’en med den guidede

konfiguration i cd-rom-drevet.

BEMÆRK: Windows Vista Firewall eller en separat rewall

vil måske anmode om tilladelse til at køre softwaren eller

programmet. Giv softwaren tilladelse til at køre for at fortsætte.

Skærmbilledet Welcome

(Velkommen) vises på skærmen.

Klik på knappen Click Here to Start

(Klik her for at starte).

Installation1�

Læs licensaftalen, og klik på

Next (Næste) for at fortsætte

installationen.

Find en tilgængelig USB-port på din

pc. Tilslut netværkskortet på en af

følgende tre måder:

Sæt det i USB-porten.

Hvis du vil bruge den medfølgende

USB Extension Base, skal du først

slutte USB Extension Base til USB-

porten på pc’en og derefter sætte

netværkskortet i USB-porten på

basen.

Hvis du vil bruge det medfølgende

USB-forlængerkabel, skal du slutte

kortet til hunstikket på USB-

forlængerkablet og derefter sætte

hanstikket i pc’en.

Når kortet er installeret korrekt,

vises skærmbilledet Congratulations

(Tillykke).

Klik på Finish (Udfør).

Det første skærmbillede i Windows

Vista-hjælpeprogrammet

Konfiguration af trådløst netværk

vises. Vælg dit netværk, og klik

derefter på Connect (Opret

forbindelse).

Hvis det trådløse netværk ikke er

beskyttet, vises dette skærmbillede.

Gå til trin H, hvis det trådløse

netværk er beskyttet.

Hvis du vil oprette forbindelse til

det ubeskyttede netværk, skal du

klikke på Connect Anyway (Opret

forbindelse alligevel ) og gå til trin I.

Hvis det trådløse netværk er

beskyttet, vises dette skærmbillede.

Indtast sikkerhedsnøglen eller

adgangsordet (kaldes også

WEP-nøgle eller pre-shared key,

afhængigt af sikkerhedstypen).

Klik på Connect (Opret forbindelse).

Table of contents

Languages:

Other Cisco Adapter manuals

Cisco

Cisco ATA 186 Installation guide

Cisco

Cisco WPC54GS User manual

Cisco

Cisco Cisco Aironet Wireless LAN Client Operator's manual

Cisco

Cisco PA-2E3 Operating and maintenance instructions

Cisco

Cisco SPA112 User manual

Cisco

Cisco PA-2FEISL-TX Operating and maintenance instructions

Cisco

Cisco Linksys PCM1000 User manual

Cisco

Cisco ATA 187 Instruction Manual

Cisco

Cisco ATA 186 User manual

Cisco

Cisco ATA188-I2 Quick guide

Cisco

Cisco ATA 191 Instruction Manual

Cisco

Cisco Linksys AE6000 User manual

Cisco

Cisco SPA100 Series User manual

Cisco

Cisco ATA 186 User manual

Cisco

Cisco AIRONET CB21AG Operator's manual

Cisco

Cisco SPA100 Series Instruction Manual

Cisco

Cisco SPA232D User manual

Cisco

Cisco MWA1221 User manual

Cisco

Cisco Linksys USBBT100 User manual

Cisco

Cisco Linksys AE6000 User manual

Cisco

Cisco PA-4E1G Series Operating and maintenance instructions

Cisco

Cisco WUSB54GS Operation manual

Cisco

Cisco Linksys WUSB600N User manual

Cisco

Cisco ATA 186 Service manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide