Toro 2770 User manual
Part No. 111-3987 Rev A
R3240T 4WD WIDE AREA MOWER
Model No: 02770-Serial No. from 310000001
Operator’s Manual
Original Instructions (EN)
Date: 21.09.10
ATTENTION
THIS SYMBOL MEANS
BE ALERT!
YOUR SAFETY IS INVOLVED
READ THIS MANUAL BEFORE USING THE R3240T MOWER.
IT IS ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR
OWN SAFETY.
ALL OPERATORS SHOULD SEEK AND OBTAIN PROFESSIONAL AND
PRACTICAL INSTRUCTIONS ON THE SAFE USE OF THE MOWER.
THESE SERVICES ARE AVAILABLE THROUGH TORO APPROVED
COMMERCIAL DEALERS.
1.5 1.5
CONTENTS
CONTENTS Page No.
SAFETY PRECAUTIONS 1.7 - 1.17
Training 1.7
Preparation 1.8
Operation 1.9 - 1.10
Slopes 1.9
Handling and storage of uids 1.11
Maintenance and storage 1.12
Decals 1.13 - 1.18
EC CONFORMITY INFORMATION 1.19 - 1.20
Noise / Vibration levels 1.19
EC Declaration of Conformity 1.20
INTRODUCTION 1.21
SPECIFICATIONS 1.22 - 1.26
Engine 1.22
Transmission system 1.22
Cutterdeck drive system 1.23
Cutterdeck lift system and steering 1.23
Hydraulic system 1.23
Vehicle specications 1.24
Operator controls 1.25
Instrumentation 1.25
Weight and dimensions 1.26
Recommended lubricants and hydraulic uids 1.26
Cutterdeck 1.26
OPERATING THE MOWER 1.27 - 1.43
Safety Notice 1.27
Operator presence controls 1.27
Identication of control panel components 1.28
Braking system 1.29
Throttle control 1.29
Travel 1.29
Work/transport modes 1.30
Transport latches 1.30
Differential lock 1.31
Travel control pedals 1.31
Forward travel speed backstop lever 1.32
Operator platform latching mechanism 1.32
Adjustable steering column 1.33
Folding the R.O.P.S 1.34
Operator seat 1.35
Warning systems 1.36
Audible warning horn 1.36
Ignition key 1.37
Engine pre-heat indicator light 1.37
1.6 1.6
CONTENTS
CONTENTS Page No.
Fuel level gauge 1.37
Hour meter 1.37
Transmission neutral indicator light 1.38
Cutterdeck drive switch indicator light 1.38
Parking brake indicator light 1.38
Hydraulic return lter indicator light 1.38
Hydraulic transmission lter indicator light 1.38
Transmission system ‘Work’ mode indicator light 1.38
Cutterdeck position control 1.39
Cutterdeck drive engagement 1.39
Starting the engine 1.40
Stopping the engine 1.41
General operating hints 1.41
Cutterdeck general information height of cut adjustment - Front cutterdeck 1.42
Cutterdeck general information height of cut adjustment - LH & RH cut-
terdecks 1.43
MAINTENANCE 1.44 - 1.60
Maintenance 1.44 - 1.45
Engine 1.46
Running in period 1.46
Running in period - at rst 50 hours 1.46
Daily and before use 1.47 - 1.50
Every 50 hours 1.51
Every 250 hours 1.52
Every 500 hours 1.53 - 1.54
Cutterdecks 1.55
Cutterblades - Cutterblade Removal 1.56
Cutterblades 1.57
Raising the mower off the ground 1.58
Towing the mower 1.59 - 1.60
GRASS CUTTING FAULTS 1.61
TROUBLE SHOOTING 1.62 - 1.65
ELECTRICAL CIRCUIT DIAGRAM 1.66 - 1.68
TRANSMISSION/BRAKE HYDRAULIC CIRCUIT DIAGRAMS 1.69 - 1.70
HYDRAULIC CIRCUIT DIAGRAMS 1.71 - 1.72
WARRANTY 1.73
NOTES 1.74- 1.77
INTERNATIONAL DISTRIBUTION LIST 1.78
CUSTOMER INFORMATION 1.79 - 1.80
1.7 1.7
Training
Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. Learn how
to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to use the mower. Local regulations may
restrict the age of the operator.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or
their property.
Do not carry passengers.
All drivers should seek and obtain professional and practical instruction. Such instruction should
emphasise:
The need for care and concentration when working with this machine.
The need to slow down when making tight turning manoeuvres. Failure to take adequate care can affect
stability leading to loss of control of the machine particularly when operating in transport mode.
Control of a ride-on-machine sliding on a slope will not be regained by application of the brake.
The main reasons for loss of control are:
- Insufcient wheel grip.
- Being driven too fast.
- Inadequate braking.
- The type of machine is unsuitable for the task.
- Lack of awareness of the effect of ground conditions, especially slopes.
- Incorrect load distribution.
READ THIS MANUAL BEFORE USING THE R3240T MOWER, IT IS
ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR OWN SAFETY.
THE FOLLOWING PRECAUTIONS MUST BE TAKEN TO HELP PREVENT
ACCIDENTS. A CAREFUL OPERATOR WHO USES COMMON SENSE IS THE
SAFEST OPERATOR.
SAFETY PRECAUTIONS
This manual should be regarded as part of the machine, as it gives essential
information regarding machine safety, operation, maintenance and specications.
1.8 1.8
Preparation
Check that the machine complies with all applicable regulations, including those in force when used on the
public highway.
While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when
barefoot or wearing open sandals. Eye protection should be worn.
Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown
by the machine.
Never operate the machine without rst checking that the operator platform latching mechanism is fully
engaged and in good working order, refer to OPERATOR PLATFORM LATCHING MECHANISM.
Ensure that the cutterdecks are fully raised with the latches and safety locks engaged in position before
transporting the mower.
Replace faulty silencers.
Check the condition of the tyres and ensure that they are inated to the correct pressures, refer to
SPECIFICATIONS. This is particularly important if the machine is to be taken on the public highway.
Check that the mower is in good working order, paying particular attention to the brakes and steering. Also
ensure that the forward/reverse speed control pedals move freely to neutral when released.
Before use, always visually inspect to see that the blades, blade bolts and cutterblades are not worn or dam-
aged. Replace worn or damaged components.
Check the mower hydraulic system, particularly the hydraulic hoses, ttings and hose supports. Worn,
crushed or damaged hoses can burst, with risks to health and damage to the machine and surrounding turf
areas.
After refuelling and adding oil to the hydraulic oil tank ensure that the caps are replaced securely.
Check that all linkages, connections and pivot nuts are secure and that wheel nuts are torqued correctly,
refer to SPECIFICATIONS.
Before operating the machine ensure that there are no foreign objects or liquids on the platform or
pedals - ALWAYS KEEP THE OPERATOR PLATFORM CLEAN/CLEAR.
Always make sure that the folding R.O.P.S is secured in its vertical operating position before use.
SAFETY PRECAUTIONS
1.9 1.9
Operation
Do not operate the engine in a conned space where dangerous carbon monoxide fumes can collect.
Mow only in daylight or in good articial light.
Before attempting to start the engine, engage the parking brake, disengage the cutterdeck drive system and
ensure that the forward/reverse speed controls are in the neutral position.
Never operate the machine without rst checking that the operator platform latching mechanism is fully
engaged and in good working order, refer to OPERATOR PLATFORM LATCHING MECHANISM.
Stored energy devices are charged when the outer wing units are in transport position. Always operate the
relevant lift controls to provide hydraulic support for the wing units suspensions before attempting to release
the transport latches.
Slopes
Do not use on a slope of more than 14 degrees. Care should be taken when using the mower on any slope
where ground conditions are such that there may be a risk of the mower rolling over. The requirements of
89/355/EEC, as amended by 95/63/EEC ‘Provision and Use of Work Equipment Directive’ should be
considered.
Stability angles given are maximum gures for a machine equipped with a R.O.P.S and are for guidance only.
Particular conditions such as wet grass or uneven ground may not permit safe operation on the slope limits
stated.
Remember there is no such thing as a ‘safe’ slope. Travel on grass slopes requires particular care. To guard
against overturning or loss of traction when travelling or mowing on a slope:
- Exercise extreme care when changing direction on a slope.
- Do not stop or start suddenly.
- Engage drive slowly.
- Keep machine speed low.
- Avoid tight turns.
- Stay alert for humps, hollows and other hidden hazards.
- Keep away from sharp inclines and steep drops.
- A thorough risk assessment should be carried out by a competent
person before travelling or mowing on a slope.
Never park on a slope.
SAFETY PRECAUTIONS
14 Degree Slope
Ground level
Fig 1
1.10 1.10
Operation continued
Watch out for trafc when crossing or near roadways.
Use extreme caution when reversing.
Disengage the cutterdeck drive system before crossing surfaces other than grass.
When using the machine, never direct discharge of material towards bystanders or allow anyone near the
machine while in operation.
Never operate the mower with defective guards, shields or without safety protective devices in place and in
good working order.
Do not change the engine governor settings or overspeed the engine. Operating an engine at excessive speed
may increase the risk of personal injury.
Before leaving the operator’s position:
- Disengage the drive to the cutterdecks.
- Lift cutterdecks to the transport position and securely lock the safety latches
or alternatively lower cutterdecks to the ground.
- Ensure the transmission is in neutral and engage the parking brake.
- Stop the engine and remove the ignition key.
Engage the parking brake, disengage the drive to the cutterdecks, stop the engine and remove ignition key:
- Before releasing blockages.
- Before checking, cleaning or working on the mower.
- After striking a foreign object. Inspect the mower for damage and make
repairs before restarting and operating the equipment.
- If the machine starts to vibrate abnormally (check immediately).
- Before refuelling.
- Before making cutterdeck adjustments.
Disengage the drive to the cutterdecks when transporting or not in use.
Reduce the throttle setting during engine run-out.
Never work on the mower when the engine is running.
Always keep feet and hands well away from the cutterblades when making adjustments.
Never operate the mower without rst checking that the operator platform is securely latched.
Always wear the seat belt when the folding R.O.P.S is in its vertical operating position.
Never wear the seat belt when the folding R.O.P.S is NOT in its vertical operating position.
Pay particular attention when operating due to the additional weight towards the front of the machine.
SAFETY PRECAUTIONS
This manual suits for next models
1
Table of contents
Other Toro Lawn Mower manuals
Toro
Toro GreensPro 1260 Greens Roller User manual
Toro
Toro 20833 User manual
Toro
Toro Groundsmaster 3400 User manual
Toro
Toro Greensmaster eTriFlex 3360 User manual
Toro
Toro 22282 Series User manual
Toro
Toro Super Recycler 20794 User manual
Toro
Toro ProLine 30333 User manual
Toro
Toro 71226 User manual
Toro
Toro 78363 User manual
Toro
Toro 4384 User manual
Toro
Toro Greensmaster Flex 1800 User manual
Toro
Toro 650D User manual
Toro
Toro 74723 User manual
Toro
Toro 20333 - BBC Personal Pace Walk Power Mower Instruction Manual
Toro
Toro HoverPro 550 User manual
Toro
Toro 74643 User manual
Toro
Toro Recycler 20954 User manual
Toro
Toro Wheel Horse 15 38 HXL User manual
Toro
Toro 13-32H Wheel Horse User manual
Toro
Toro Titan 5400C User manual
Popular Lawn Mower manuals by other brands
TALEN TOOLS
TALEN TOOLS AVR HGM30 manual
DEWEZE
DEWEZE ATM-725 Operation and service manual
Weed Eater
Weed Eater 180083 owner's manual
Husqvarna
Husqvarna Poulan Pro PP185A42 Operator's manual
Better Outdoor Products
Better Outdoor Products Quick Series Operator's manual
Cub Cadet
Cub Cadet 23HP Z-Force 60 Operator's and service manual
