Texas XC140-98 User manual

Original instructions

TEXAS XC140-98

OWNER’S MANUAL

WARNING!

Read this manual carefully before using the machine

Texas A/S - Knullen 22 - DK-5260 Odense S - Denmark Version 18.1

Tel. +45 6395 5555 - [email protected] - www.texas.dk

INTRODUCTION

Dear Customer,

Thank you for having chosen one of our products. We hope that you

will get complete satisfaction from using your new machine and that it will

fully meet all your expectations.

This manual has been written to help you become familiar with the

machine and use it safely and efficiently. Do not forget that it is an

integral part of the machine, so keep it close at hand for future reference

and pass it on to the purchaser if you sell the machine.

This new lawn mower has been designed and built in compliance

with current standards, and is safe and reliable if used for cutting and

collecting grass following the instructions given in this manual (proper

usage). If you use the machine in any other way or ignore the

instructions for safe use, maintenance and repair, it is considered

"incorrect usage". In this case, the warranty is automatically voided and

the manufacturer is not held responsible for damage or injury to oneself

or others.

Since we regular improve our products, you may find slight

differences between your machine and the descriptions contained in this

manual. Modifications can be made to the machine without notice and

without the obligation to update the manual, although the essential safety

and function characteristics will remain unaltered. If in doubt, do not

hesitate to contact your dealer. And now enjoy your work!

AFTER-SALES SERVICE

This manual gives all the necessary instructions for using the

machine and carrying out basic maintenance.

Any adjustments or maintenance operations not described in

this manual must be carried out by your Dealer or a specialized

Service Centre. Both have the necessary knowledge and equipment

to ensure that the work is done correctly without affecting the safety

of the machine.

This will help you keep your new purchase in peak performance and

maintain its value over time.

INTRODUCTION

IMPORTANT

The lawnmower must always be used with utmost caution. So that

safety precautions and operating instructions are always readily on hand,

labels have been affixed to the machine showing pictographs illustrating

the main operating precautions

Because these labels, according to applicable safety standards, are

considered an integral part of the machine, the user is therefore

responsible for replacing them in the event of their becoming detached or

illegible.

For any replacement, contact your dealer.

INTRODUCTION

LABEL POSITION

TABLE OF CONTENTS

1. SAFETY..............................................................................................1

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS

.....................7

3. UNPACKING AND ASSEMBLY..........................................................8

4. CONTROLS AND INSTRUMENTS...................................................13

5. HOW TO USE THE MACHINE..........................................................15

5.1 SAFETY RECOMMENDATIONS.............................................15

5.2 WHY THE SAFETY DEVICES CUT IN....................................16

5.3 DIRECTIONS BEFORE STARTING WORK............................16

5.4 USING THE MACHINE............................................................17

5.5 USING ON SLOPING GROUND..............................................22

5.6 TRANSPORTING.....................................................................22

5.7 LAWN MAINTENANCE............................................................23

6. MAINTENANCE................................................................................24

6.1 SAFETY RECOMMENDATIONS.............................................24

6.2 SCHEDULED MAINTENANCE................................................24

6.3 CHECKS AND ADJUSTMENTS..............................................26

6.4 DISMANTLING AND REPLACEMENT.....................................28

6.5 LUBRICATION .........................................................................30

7. SPECIFICATIONS ............................................................................31

SAFETY

1. SAFETY

1.1 HOW TO READ THE MANUAL

Some paragraphs in the manual containing important information

regarding safety and operation are emphasized in the following ways.

NOTE or IMPORTANT These give details or further information on

what has already been said, in the aim to prevent damage to the

machine. Non-observance will result in the risk of injury to

oneself or others.

Non-observance will result in the risk of serious

injury or death to oneself or others.

This manual describes various versions of the machine

Positions on the machine, such as “front”, “back”, “left”

or “right” hand side, refer to the direction of

forward travel For all operations regarding

the use and maintenance of

the engine not described in this manual, refer

to the relevant manuals which form an integral

part of all the documentation supplied with the

machine.

1.2 GENERAL SAFETY REGULATIONS

Read carefully before using the machine.

A) TRAINING

1) Read the instructions carefully. Be familiar with the controls and

how to use the equipment properly.

2) Never let children or people unfamiliar with these instructions use

the machine. Local regulations can restrict the age of the user.

3) Never mow while people, especially children, or

pets nearby; Never mow while dark.

4) Keep in mind that the operator or user is responsible

for accidents or hazards occurring to other people or their property.

SAFETY

5) Do not carry passengers.

6) All drivers should seek and obtain professional and practical

instruction. Such instruction should emphasize:

– the need for care and concentration when working with ride-on

machines;

– you can not use the brake to regain control of a ride-on machine

sliding down a slope. The main reasons for loss of control are:

– insufficient wheel grip;

– overspeeding;

– inadequate braking;

– the type of machine is unsuitable for its task;

– unawareness of the effect of ground conditions, especially slopes;

– incorrect hitching and load distribution

B) PREPARATION

1) While mowing, always wear sturdy footwear

and long trousers. Do not operate the equipment

barefoot or wearing open sandals.

2) Thoroughly inspect the area where the equipment is to be used

and remove all objects which can be ejected from the machine.

3) DANGER! Petrol is highly flammable:

– store fuel in containers specifically designed for this

purpose;

– refuel outdoors only and do not smoke while refuelling;

–add fuel before starting the engine. Never remove the

cap of the fuel tank or add petrol while the engine is

running or when the engine is hot;

– if you spill petrol, do not start the engine and move the

machine away from the area of spillage. Do not create any source of

ignition until the petrol vapors have evaporated;

– put back and tighten all fuel tank and container caps securely.

4) Replace faulty silencers.

5) Before use, always inspect the machine to check that the blades,

blade bolts and cutter assembly are not worn or damaged. Replace worn

or damaged blades and bolts in sets to preserve balance.

6) On multi-bladed machines, remember that the rotation of one

blade can cause other blades to rotate

SAFETY

C) OPERATION 1) Do not start the engine in a confined space where

dangerous carbon monoxide fumes can collect.

2) Mow only in daylight or good artificial light.

3) Before starting the engine, disengage the blades and shift into

neutral.

4) Do not use the machine on lawns with gradients of more than

15°(27%)；do not use the machine on lawns with side gradients

above 10°(18%).

5) Remember there is no such thing as a “safe” slope. Travelling

on grass slopes requires particular care. To guard against overturning:

– do not stop or start suddenly when going up or downhill;

– engage the drive slowly and always keep the machine in gear,

especially when travelling downhill;

– machine speeds should be kept low on slopes and during tight

turns;

– stay alert for humps and hollows and other hidden hazards;

–never mow across the face of the slope.

6) Use care when pulling loads or using heavy equipment:

– use only approved drawbar hitch points;

– limit loads to those you can safely control;

– do not turn sharply. Use care when reversing;

– use counterweight(s) or wheel weights whenever advised in the

instructions manual.

7) Stop the blades before crossing surfaces other than grass.

8) Never use the machine with damaged guards, or without the

safety protective devices in place.

9) Do not change the engine governor settings or overspeed the

engine. Operating the engine at excessive speed can increase the risk of

personal injury.

10) Before leaving the driving seat:

– disengage the blades and lower the attachments;

– go into neutral and apply the parking brake;

– stop the engine and remove the ignition key.

11) Disengage the blades, stop the engine and remove the

ignition key:

– before clearing blockages or unclogging the collector channel;

– before cleaning, checking or servicing the machine;

SAFETY

– after striking a foreign object. Inspect the machine for damage and

make repairs before restarting and operating the machine;

– If the machine starts to vibrate abnormally (check for the causes

immediately).

12) Disengage the blades for transport or whenever they are not in

use.13) Stop the engine and disengage the blades:

– before refuelling;

– before making height adjustment unless adjustment can be made

from the operator’s position.

14) Reduce the throttle during engine run-out. If the engine is

provided with a shut-off valve, cut off the fuel when you have finished

mowing.

15) Watch out for traffic when crossing or near roadways.

16) Never direct discharge of material toward bystanders nor allow

anyone near the machine while in operation.

D) MAINTENANCE AND STORAGE

1) Keep all nuts, bolts and screws tight to be sure the equipment is in

safe working condition.

2) Never store the equipment with petrol in the tank inside a building

where fumes may reach an open flame or spark.

3) Allow the engine to cool before storing in any enclosure.

4) To reduce fire hazards, keep the engine, silencer, battery

compartment and petrol storage area free of grass, leaves, or excessive

grease.

5) Check the grass-catcher frequently for wear or deterioration.

6) Replace worn or damaged parts for safety purposes.

7) If the fuel tank has to be drained, this should be done outdoors.

8) On multi-bladed machines, remember that the rotation of one

blade can cause other blades to rotate.

9) When the machine is to be parked, stored or left unattended,

lower the cutting means unless a positive mechanical lock is used.

SAFETY

1.3 SAFETY LABELS

Your machine must be used with care. This is why labels with

illustrations have been placed on the machine, to remind you of the main

precautions to take during use.

These labels are to be considered an integral part of the machine.

Should a label come off or become illegible, contact your dealer to

replace it. Their meaning is explained below.

Table of contents

Popular Lawn Mower manuals by other brands

RHINO

RHINO 1958 parts manual

Wolf Garten

Wolf Garten Compact plus 40 B instruction manual

Cub Cadet

Cub Cadet LTX 1045 brochure

Craftsman

Craftsman 917.378461 owner's manual

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Operator's manual

Challenge

Challenge CH18V2 Original manual

TALEN TOOLS

TALEN TOOLS AVR HGM30 manual

DEWEZE

DEWEZE ATM-725 Operation and service manual

Weed Eater

Weed Eater 180083 owner's manual

Husqvarna

Husqvarna Poulan Pro PP185A42 Operator's manual

Better Outdoor Products

Better Outdoor Products Quick Series Operator's manual

Cub Cadet

Cub Cadet 23HP Z-Force 60 Operator's and service manual

MTD

MTD 795, 792, 791, 790 Operator's manual

Toro

Toro Groundsmaster 3505-D Service manual

Dennis

Dennis FT 610 instruction manual

AIRFORCE

AIRFORCE F-15 Gen 3 owner's manual

MTD

MTD 126-220-000 owner's guide

Toro

Toro 74806 Operator's manual