SOLTEK SL-65D User manual
i
Notice to End Users
This User’s Guide & Technical Reference is for assisting system
manufacturers and end users in setting up and installing the
mainboard.
Every effort has been made to ensure that the information in this
manual is accurate. Soltek Computer Inc. is not responsible for
printing or clerical errors. Information in this document is subject to
change without notice and does not represent a commitment on the
part of Soltek Computer Inc.
No part of this manual may be reproduced, transmitted, translated into any
language in any form or by any means, electronic or mechanical, including
photocopying and recording, for any purpose without the express written
permission of Soltek Computer Inc.
Companies and products mentioned in this manual are for
identification purposes only. Product names appearing in this
manual may or may not be registered trademarks or copyrights of
their respective companies.
SOLTEK COMPUTER INC. PROVIDES THIS MANUAL “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL SOLTEK COMPUTER
INC. BE LIABLE FOR ANY LOSS OR PROFITS, LOSS OF BUSINESS, LOSS
OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
KIND, EVEN IF SOLTEK COMPUTER INC. HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
© Copyright 1999 Soltek Computer Inc. All right reserved
Web site: http://www.soltek.com.tw
email: [email protected]
Edition: March 1999
Version: 1.0
SL-65D SERIALS
ii
iii
Contents
Chapter 1: Introduction ----------------------------------------------------- 1
Features------------------------------------------------------------- 1
CPU ---------------------------------------------------------------- 1
Chipset ---------------------------------------------------- 1
L2 Cache ----------------------------------------------------------- 1
Main Memory ------------------------------------------------------- 1
BIOS--------------------------------------------------------------- 2
Super I/O Function ----------------------------------------------- 2
Other Functions -------------------------------------------------- 2
Mainboard Layout with Default Settings --------------------- 3
Chapter 2: Hardware Setup---------------------------------------------- 4
CPU Type Configuration----------------------------------------- 4
CPU 4.5X Clock Setting --------------------------------------- 4
Celeron370-300/66MHz --------------------------------------- 4
CPU 5.0X Clock Setting ------------------------------------- 4
Celeron370-333/66MHz --------------------------------------- 4
CPU 5.5X Clock Setting ------------------------------------- 5
Celeron370-366/66MHz --------------------------------------- 5
CPU 6.0X Clock Setting ------------------------------------ 5
Celeron370-400/66MHz --------------------------------------- 5
System Memory Configuration-------------------------------- 5
Jumper Settings --------------------------------------------------- 6
JP2/JPA1: Onboard Sound Chip(AC97 Codec)Enabled/Disable------------6
JFAN:Onboard FAN (12V)Connector ------------------------------------6
JBAT1:Clear CMOS Data-------------------------------------------------------6
JP10:Cpower Lost Resume--------------------------------------------------- 7
SW1:5-6 Bus Clock Select------------------------------------------------- 7
SW1: 1-4: Bus Ratio Select ---------------------------------------------------- 8
Sound Connector--------------------------------------------------------------8
J7/CD-IN1: CD-ROM Audio Connector-------------------------------------8
Game/MIDI port---------------------------------------------------------------- 8
Mic:Microphone Jack------------------------------------------------------------- 8
Line in:Audio in Jack-------------------------------------------------------------- 8
iv
Line Out:Audio Out Jack--------------------------------------------------------- 8
RT1:Thermal Sensor Cable Connector------------------------------------------ 8
IDE LED Activity Light: (J2 pin1-4)--------------------------- --------------- 8
Infrared Port Module Connector (J2 pin6-10) -------------------------------- 9
J2 pin12, 13: PWR Switch--------------------------------------------------- 9
SLEEP Switch (J2 pin14, 15) ---------------------------------------------------- 9
Speaker Connector (J1 pin1-4) ----------------------------------------------- 9
Reset Switch (J1 pin5, 6)---------------------------------- ---------------------- 9
Power LED and Keylock Switch (J1 pin8-12)------------ --------------------- 9
JWOL1: Wake On Lan (WOL) Connector ----------------------------------- 10
Green LED (J1 pin14, 15)------------------------------ ------------------------- 10
J2 Switch Signal Summary ---------------------------------------------------- 11
J1 Switch Signal Summary ---------------------------------------------------- 11
Chapter 3: Award BIOS Setup --------------------------------------- 12
Standard CMOS Setup -------------------------------------------------------- 13
Date (mm:dd:yy) ---------------------------------------------------------------14
Time (hh:mm:ss) ---------------------------------------------------------------- 14
Primary(Secondary)Master/Slave---------------------------------------- 14
Video ---------------------------------------------------------- 14
Halton----------------------------------------------------------- 14
BIOS Features Setup ------------------------------------------------------------ 15
Virus Warning--------------------------------------------------------16
CPU Internal --------------------------------------------------------- 16
Cache ----------------------------------------------------- 16
External Cache ----------------------------------------------------- 16
Quick Power on self Test ----------------------------------------------------- 16
Boot Sequence -------------------------------------------------------------------- 17
Swap Floppy Drive ------------------------------------------------------------ 17
Boot Up Floppy Seek ---------------------------------------------------------- 17
Boot UP Numlock Status---------------------------------------------------- 17
IDE HDD Block Mode-------------------------------------------------------- 17
Gate A20 Option -------------------------------------------------------- 17
Memory Parity/ECC Check------------------------------------------------- 17
Typematic Rate Setting------------------------------------------------------ 18
Typematic Rate (Chars/Sec) ------------------------------------------------- 18
Typematic Delay (Msec) ------------------------------------------------------ 18
Security Option--------------------------------------------------------------------- 18
PCI/VGA palette Snoop---------------------------------------------------------- 18
v
OS Select for DRAM > 64MB--------------------------------------------------- 18
Report No FDD------------------------------------------------------------------- 18
For WIN95------------------------------------------------------------------------ 18
Video BIOS Shadow------------------------------------------------------------- 18
C8000-CBFFF to----------------------------------------------------------------- 19
DC000-DFFF Shadow----------------------------------------------------------- 19
Chipset Features Setup------------------------------------------------------ 20
Bank 0/1 2/3 4/5 Dram timing-------------------------------------------------- 20
SDRAM Cycle------------------------------------------------------------------------ 21
Memory Hole ------------------------------------------------------------------------ 21
Read Around Write------------------------------------------------------------------- 21
Concurrent PCI/HOST-------------------------------------------------------------- 21
System BIOS Cacheable----------------------------------------------------- 21
Video RAM Cacheable-------------------------------------------------------------- 22
AGP Aperture Size (MB) --------------------------------------------------------- 22
AGP-2X Mode---------------------------------------------------------------------- 22
OnChip USB------------------------------------------------------------------------ 22
USB Keyboard Support------------------------------------------------------------ 22
OnChip Sound --------------------------------------------------------------------- 22
OnChip Modem-------------------------------------------------------------------- 23
CPU Host Clock(CPU/PCI)--------------------------------------------------------- 23
Power Management Setup ----------------------------------------------- 24
ACPI Function------------------------------------------------------------------------ 24
Power Management ----------------------------------------------------------------- 24
PM Control by APM---------------------------------------------------------------- 24
Video Off Method ------------------------------------------------------------------ 25
Video Off After----------------------------------------------------------------------- 25
MODEM Use IRQ -------------------------------------------------------------------25
Soft-Off by PWR-BTTN------------------------------------------------------------ 25
Doze Mode ------------------------------------------------------------------------- 25
Standby Mode---------------------------------------------------------------------- 26
Suspend Mode----------------------------------------------------------------------- 26
HDD Power Down ------------------------------------------------------------------ 26
Modem Ring Resume---------------------------------------------------------------- 26
RTC Alarm Resume Wake On LAN ----------------------------------------------- 26
IRQ (#), NMI; ------------------------------------------------------------------------ 26
Primary IDE 0------------------------------------------------------------------------ 26
Primary IDE 1; ---------------------------------------------------------------- 26
Secondary IDE 0--------------------------------------------------------------- 26
vi
Secondary IDE 1; ------------------------------------------------------------- 26
Floppy Disk; ------------------------------------------------------------------- 26
Serial Port; ---------------------------------------------------------------------- 27
Parallel Port--------------------------------------------------------------------- 27
PNP/PCI configuration Setup---------------------------------------------------- 28
Resources Controlled By---------------------------------------------------------- 29
Reset Configuration Data---------------------------------------------------------- 29
IRQ-x assigned to------------------------------------------------------------------ 29
DMA-x assigned to----------------------------------------------------------------- 29
Assign IRQ for USB--------------------------------------------------------------- 29
Assign IRQ for VGA------------------------------------------------------------- 29
Load Setup Defaults------------------------------------------------------------- 30
CPU SPEED SETTING--------------------------------------------------------- 30
USB Keyboard Support---------------------------------------------------------- 31
Integrated Peripherals---------------------------------------------------- 31
IDE Primary---------------------------------------------------- 32
Master/Slave PIO---------------------------------------------------- 32
IR Function Duplex ----------------------------------------------------- 32
Onboard Parallel Port ----------------------------------------------------- 32
Onboard Parallel Mode-------------------------------------------------- 33
ECP Mode Use DMA ----------------------------------------------------------- 33
Parallel Port EPP Type ---------------------------------------------------------- 33
Supervisor/User Password------------------------------------------------------ 34
IDE HDD Auto Detection ------------------------------------------------------ 35
Save & Exit Setup --------------------------------------------------------------- 35
Exit Without Saving ----------------------------------------------------------- 35
1
Chapter 1
Introduction
Features
CPU1. Supports Celeron 370 CPUs using Socket 370 at 300 ~
800MHz
2. Supports CPU voltage autodetect circuit
3. Supports 66/100MHz Bus Clock with autodetect (BIOS
provides 75/83/103/112 MHz Bus Clock without auto detect)
Chipset
1. VIA 693Apollo Pro-Plus chipset
2. PCI Rev 2.1, 5V, 33MHz interface compliant
3. Supports 66/133 MHz, 3.3V AGP(Accelerated Graphics
Port) slot
L2 Cache
1. Celeron 370 supports 128K write back cache
with Pipelined Burst SRAMs
Main Memory
1. Memory range from 8MB (minimum) to 768MB(SDRAM)
(maximum) with DRAM Table Free configurations
2. Supports SDRAM with 12/10/8ns speed
3. Supports 3 pcs 168pin DIMM sockets (3.3V
Unbuffered and 4 clock type)
4.DRAM supports ECC or Parity function
2
BIOS
1. AWARD Plug and Play BIOS
2. Supports ACPI and legacy APM
3. Flash Memory for easy upgrade
Super I/O Function
1. Integrated USB (Universal Serial Bus) controller with
two USB ports.(USB V1-1 and Universal HCI V1.1
Compliant)
2. Supports 2 IDE channels with 4IDE devices (including
ZIP/LS-120 devices)
3. Provides PCI IDE Bus Master function and supports
Ultra DMA33 and Ultra DMA66 function
4. One floppy port
5. Two high speed 16550 FIFO UART ports
6. One parallel port with EPP/ECP/SPP capabilities
7. PS/2 mouse connector
8. Built-in RTC, CMOS, keyboard controller on single I/O
chip
9. Peripherals boot function (with ATX power)
Other Functions
1. ATX size 17cm x 30.5cm
2. 4 PCI Master slots, 2 ISA slots, 1 AGP slot and 1
AMR(Audio Modem Riser) Slot
3. Onboard built-in hardware monitor controller that monitor
temperature, fan speed and power supply voltage
4. Provides DIP switch setting
5. Supports 66/100MHz Bus Clock
6. Integrated PCI-master dual full-duplex direct-sound AC97-
link-compatible sound system
7. Supports Wake On LAN function
8. Supports Power Lost Resume function
9. BIOS supports 103/112MHz Bus clock.
10. Onboard bundle with thermal sensor cable
3
Mainboard Layout with Default Settings
The default settings of the following figure is for the
Celeron370-300/66MHz
Figure 1-1. Motherboard Layout
Note: For 100MHz CPU environment the SDRAM must comply
with PC-100 spec.
4
Chapter 2
Hardware Setup
CPU Type Configuration
CPU 4.5X Clock Setting
Celeron 370-300/66MHz
Figure 2-1. CPU Type Configuration
CPU 5.0X Clock Setting
Celeron 370-333/66MHz
Figure 2-2. CPU Type Configuration
Table of contents
Other SOLTEK Motherboard manuals
SOLTEK
SOLTEK SL-75KAV User manual
SOLTEK
SOLTEK SL-K8T-939FL User manual
SOLTEK
SOLTEK SL-65LIV-T User manual
SOLTEK
SOLTEK SL-PM800I User manual
SOLTEK
SOLTEK SL-63AV Use and care manual
SOLTEK
SOLTEK SL-K890-754G User manual
SOLTEK
SOLTEK SL-65EP+-T User manual
SOLTEK
SOLTEK SL-65DVB User manual
SOLTEK
SOLTEK 85DIR User manual
SOLTEK
SOLTEK SL-54A2 User manual
SOLTEK
SOLTEK SL-65ME User manual
SOLTEK
SOLTEK SL-54A2-S User manual
SOLTEK
SOLTEK 82440FX User manual
SOLTEK
SOLTEK SL-85DRV+ User manual
SOLTEK
SOLTEK SL-85DR User manual
SOLTEK
SOLTEK SL-85SID User manual
SOLTEK
SOLTEK SL-75KAV User manual
SOLTEK
SOLTEK SL-B8E-FG User manual
SOLTEK
SOLTEK SL-865G3 User manual
SOLTEK
SOLTEK SL-65GS User manual
