Biostar M7VIT Bravo Operating and installation instructions

FCC Statement and Copyright

This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. There is no guarantee that interference will not occur in a

particular installation.

The vendor makes no representations or warranties with respect to the

contents here of and specially disclaims any implied warranties of

merchantability or fitness for any purpose. Further the vendor reserves the

right to revise this publication and to make changes to the contents here of

without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole is not allowed without

first obtaining the vendor’s approval in writing.

The content of this user’s is subject to be changed without notice and we

will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

ENGLISH..................................................................................................... 1

M7VIT Features..................................................................................................................1

Package contents..............................................................................................................2

Layout of M7VIT.................................................................................................................3

CPU Installation.................................................................................................................4

DDR DIMM Modules: DIMM1-2-3 ......................................................................................5

Jumpers, Headers, Connectors & Slots..........................................................................7

ESPAÑOL ................................................................................................. 12

Características del M7VIT...............................................................................................12

Contenido del Paquete.................................................................................................... 13

Disposición del M7VIT ....................................................................................................14

Instalación de la CPU......................................................................................................15

Módulos DDR DIMM: DIMM1-2-3 ....................................................................................16

Puentes, Cabezales, Conectores y Ranuras.................................................................18

WARPSPEEDER ...................................................................................... 23

Introduction......................................................................................................................23

System Requirement....................................................................................................... 24

Installation........................................................................................................................24

Usage................................................................................................................................26

TROUBLE SHOOTING............................................................................. 34

SOLUCIÓN DE PROBLEMAS ................................................................. 35

iip

iio

English

M7VIT Features

 Use VIA VT8377 (KT400)/ VT8235 Chipset, Winbond W83697HF.

 Contains on board I/O facilities, which include two serial ports, a parallel

port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a

game port.

 Supports Single Socket-A for an AMD Athlon/ Duron Family processor,

running at 200/266/333 MHz Front Side Bus frequency.

 The AMD Athlon/ Duron system bus supports the 200/266/333 MHz

high-speed, split-transaction AMD Athlon/ Duron system bus interface.

 Supports Ultra DMA 33/66/100/133 Bus Master Modes, PIO Mode 4,

Master Mode, and high performance hard disk drives.

 Supports USB2.0 6 ports High Speed Device, 2 ports in Rear Panel and 4

ports in Front Panel.

 The VT8377 (KT400) system controller is designed to support

200/266/333/400 MHz DDR SDRAM DIMMs.

 Support a maximun memory size up to 3GB.

 Supports one CNR Slot (Type B only), one AGP 4X/ 8X Slot, and five 32-bit

PCI Bus slots.

 Complies with PC ATX form factor specifications.

 Supports popular operating systems such as Windows NT, Windows 98SE,

Windows 2000, Windows ME, Windows XP and LINUX.

 CPU over temperature protection.

 Intel® AC’97 2.2 compatible. High S/N ratio meets PC 99 requirements.

 Line-in phonejack and Mic-in jack share with rear Audio out for 6 channels

Audio.

 6-Channel Hardware Audio or Codec. (Change Line-In to Back-Audio Out

and Mic-In to Bass/ Center Out by Audio Utility.) (Optional)

iip

iio

 Support Front Audio pin head functions.

 CMI 8738 Hardware Audio Features (Optional):

＊ 6CH DAC for AC3® 5.1CH purpose.

＊ HRTF-based 3D positional audio, supporting DirectSound™ 3D and

A3D™ interface.

＊ Supports 4.1/5.1 speakers, C3DX positional audio in 4/ 6 CH speaker

mode.

＊ MPU-401 port.

＊ Built-in ZV port.

Package contents

 HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1

 Flash Memory Writer for BIOS update X 1

 USB Cable X 2 (Optional)

 Rear I/O Panel for ATX Case X 1 (Optional)

iip

iio

Layout of M7VIT

CPU

Socket A

VT8377

(KT400)

VT8235

JATXPWR1

JKBV1

JUSBV1

AGP SLOT

PCI1

PCI2

PCI SLOT

PCI3

PCI4

PCI5

PCI SLOT

CNR1

JWOL1

CNR SLOT

JAUDIO1

Codec

JPANEL1

JSFAN1

223

JUSB2

BAT1

JCMOS1

JUSBV2

JGAME1

GAME Port

SP-OUTMIC-IN LINE-IN

JUSB3

IDE1IDE2

FDD1

BIOS

Hardware

Audio

Winbond

I/O

664

iip

iio

CPU Installation

1. Pull the lever sideways away from the socket then raise the lever up

to 90-degree angle.

2. Locate Pin A in the socket and lock for the white dot or cut edge in

the CPU. Match Pin A with the white dot/cut edge then insert the

CPU.

3. Press the lever down. Then Put the fan on the CPU and buckle it

and put the fan’s power port into the JCFAN1, then to complete the

installation.

CPU/ System Fan Headers: JCFAN1/ JSFAN1

JCFAN1

1Ground

12V

Sense

JSFAN1

Ground12V

Sense

CPU

iip

iio

DDR DIMM Modules: DIMM1-2-3

DRAM Access Time: 2.5V Unbuffered/ Registered DDR 1600/ 2100/

2700/ 3200 Type required.

DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184

pin)

Only support 4 bank for DDR PC3200 (2pcs Double-Side or 3

pcs Single-Side).

DIMM Socket

Location DDR Module Total Memory

Size (MB)

DIMM 1 64MB

128MB/256MB/512MB/1GB

DIMM 2 64MB/128MB/256MB/512MB/1GB

DIMM3 64MB/128MB/256MB/512MB/1GB

Max is

3GB

* The list shown above for DRAM configuration is only for reference.

 If use FSB333MHz CPU, the Memory support only

DDR333 (PC2700).

List of the status of DDR 400 already passed

Clock Vender Serial No. (Chip) Module

Size MEMTEST

1 DDR400 KINGMAX KDL684T4AA-50 256M Pass

2 DDR400 SAMSUNG K4H560838D-TCC4 256M Pass

3 DDR400 TwinMOS TMD7608F8E50B 256M Pass

4 DDR400 Winbond W942508BH-5 256M Pass

5 DDR400 Winbond W942508BH-5 512M Pass

iip

iio

How to install a DIMM Module

1. The DIMM socket has a

“ Plastic Safety Tab”, and the

DIMM memory module has an

“Asymmetrical notch”, so the

DIMM memory module can only

fit into the slot in one direction.

2. Push the tabs out. Insert the

DIMM memory modules into the

socket at a 90-degree angle, then

push down vertically so that it will

fit into the place.

3. The Mounting Holes and plastic

tabs should fit over the edge and

hold the DIMM memory modules

in place.

iip

iio

Jumpers, Headers, Connectors & Slots

Hard Disk Connectors: IDE1/ IDE2

The motherboard has a 32-bit Enhanced PCI IDE Controller that

provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/ 66/ 100/ 133

functionality. It has two HDD connectors IDE1 (primary), IDE2

(secondary) and IDE3.

The IDE connectors can connect a master and a slave drive, so you can

connect up to four hard disk drives. The first hard drive should always be

connected to IDE1.

Floppy Disk Connector: FDD1

The motherboard provides a standard floppy disk connector that

supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This

connector supports the provided floppy drive ribbon cables.

Accelerated Graphics Port Slot: AGP1 (only support AGP

power 1.5V)

Your monitor will attach directly to that video card. This motherboard

supports video cards for PCI slots, but it is also equipped with an

Accelerated Graphics Port (AGP). An AGP card will take advantage of

AGP technology for improved video efficiency and performance,

especially with 3D graphics.

Communication Network Riser Slot: CNR1

The CNR specification is an open Industry Standard Architecture, and it

defines a hardware scalable riser card interface, which supports audio,

network and modem only.

Peripheral Component Interconnect Slots: PCI1-5

This motherboard is equipped with 5 standard PCI slots. PCI stands for

Peripheral Component Interconnect, and it is a bus standard for

expansion cards, which has, supplanted the older ISA bus standard in

most ports. This PCI slot is designated as 32 bits.

iip

iio

Power Connectors: JATXPWR1

Wake On LAN Header: JWOL1

Front USB Header: JUSB2/3

5V/ 5VSB Selection for USB/KB: JUSBV1/2/ JKBV1

JATXPWR1

(ATX Main Power Conn.)

JATXPWR1

(ATX Power Conn.)

JUSB2/3

Pin1,2 ==> +5V

Pin3,4 ==> Data(-)

Pin5,6 ==> Data(+)

Pin7,8 ==> Ground

Pin9 ==> KEY

Pin10 ==> NA

JWOL1

5V_SB Wake up

Ground

JKBV1

Pin 1-2 on ==> 5V

Pin 2-3 on ==> 5V_SB

JUSBV1/2

Other manuals for M7VIT Bravo

Table of contents

Other Biostar Motherboard manuals

Biostar

Biostar TPOWER N750 Manual

Biostar

Biostar P4M800-M7 A User manual

Biostar

Biostar M6TWC User manual

Biostar

Biostar INTEL B760 STANDARD Series User manual

Biostar

Biostar M5ATC User manual

Biostar

Biostar TA770E - BIOS User manual

Biostar

Biostar NF61V Micro AM2 SE User guide

Biostar

Biostar TA790GX A3+ User guide

Biostar

Biostar Z590GTA User manual

Biostar

Biostar TF560 A2 User guide

Biostar

Biostar M6TBA User manual

Biostar

Biostar M7VIT Bravo User guide

Biostar

Biostar TF7025-M2 User manual

Biostar

Biostar H310MDG2 User manual

Biostar

Biostar P4TDQ Pro Operating and installation instructions

Biostar

Biostar I865G-M7 User manual

Biostar

Biostar X570GT8 User manual

Biostar

Biostar A770L3 - BIOS User manual

Biostar

Biostar M7TDA User manual

Biostar

Biostar K8NHA Grand User guide

Biostar

Biostar P4SDQ User manual

Biostar

Biostar G31-M7 User guide

Biostar

Biostar Racing X470GTN User manual

Biostar

Biostar BI94GS-IA User guide

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 user guide