Shuttle AB52 User manual
AB52
Pentium4/Celeron
478-pin Processor
Based MAIN BOARD
User's Manual
Shuttle®
AB52
Pentium 4/Celeron , 478-pin processor based Mainboard
Manual Version 1.0
Copyright
Copyright©
2002 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification
purposes only and may be trademarks of their respective owners.
M609
- 1 -
WHAT'S IN THE MANUAL .....................................................................4
Quick Reference................................................................................................4
About This Manual ............................................................................................4
1 INTRODUCTION .................................................................................5
1.1 TO DIFFERENT USERS ..............................................................................5
FIRST-TIMEDIYSYSTEMBUILDER ............................................................5
EXPERIENCEDDIY USER .........................................................................5
SYSTEMINTEGRATOR ...............................................................................5
1.2 ITEM CHECKLIST........................................................................................6
2 FEATURES..........................................................................................7
2.1 SPECIFICATIONS ........................................................................................7
3 HARDWARE INSTALLATION ...........................................................10
3.1 STEP BY STEP INSTALLATION................................................................10
Accessories of AB52.............................................................................10
STEP1 Installthe CPU........................................................................... 11
STEP 2 Set Jumpers..............................................................................13
STEP3 InstallDDR SDRAM SystemMemory ........................................13
STEP4 Install Peripheralsin System Case.............................................14
STEP5 Mount theMainboard on theComputer Chassis ........................15
STEP6 Connect FrontPanel Switches/LEDs/Speaker/USB/Audio ........16
STEP 7 Connect IDE and Floppy Disk Drives.........................................18
STEP8Connect OtherInternal Peripherals ............................................19
STEP9 Connectthe Power Supply ........................................................20
STEP10 Install Add-onCards inExpansion Slots ..................................20
STEP11ConnectExternalPeripherals to Back Panel...........................21
STEP 12 First Time System Boot Up......................................................23
TABLE OF CONTENTS
- 2 -
STEP13 InstallDrivers & SoftwareComponents....................................24
3.2 JUMPER SETTINGS ..................................................................................25
JUMPERS& CONNECTORSGUIDE ....................................................26
Jumpers
Clear CMOS Setting (JP1) ....................................................................28
BIOSFlash ProtectionSetting(JP2).......................................................28
Back-Panel Connectors
PS/2 Keyboard & PS/2 Mouse Connectors ............................................29
USB1/USB2Port Connectors.................................................................29
COM1/2Port Connectors .......................................................................29
ParallelPort Connector...........................................................................29
Line-Out PortConnector ........................................................................30
Line-InPortConnector............................................................................30
Mic-In PortConnector .............................................................................30
MIDI/GAMEPortConnector....................................................................30
Front-Panel Connectors
PanelConnector(Panel1) .......................................................................31
Speaker Connector (Speaker1)..............................................................32
ExtendedUSB Header (USB1) ..............................................................32
Internal Peripherals Connectors
EnhancedIDE andFloppy Connectors ...................................................33
Other Connectors
ATXPower SupplyConnector (ATX1).....................................................34
Cooling Fan Connectors for CPU (CPUFAN1),CAS (CASFAN1), PWR
(PWRFAN1) ...........................................................................................35
IRHeader(SIR1) ....................................................................................35
CD-INConnectors(CD_IN1/2)................................................................36
AudioConnector (Audio1) ......................................................................36
- 3 -
3.3 SYSTEM MEMORY CONFIGURATION ......................................................37
1.INSTALL MEMORY.............................................................................37
2.UPGRADE MEMORY.........................................................................37
4 SOFTWARE UTILITY .......................................................................38
4.1 Mainboard CD Overview ..........................................................................38
4.2 Install Mainboard Software ......................................................................39
4.2.A InstallIntelChipsetDriver ..................................................................40
4.2.B InstallIDE Driver ...............................................................................41
4.2.C InstallAudio Driver............................................................................42
4.3 View the User's Manual............................................................................43
5 BIOS SETUP.....................................................................................44
5.1 ENTER BIOS ..............................................................................................44
5.2 THE MAIN MENU .......................................................................................45
STANDARD CMOS FEATURES ................................................................47
ADVANCED BIOS FEATURES..................................................................51
ADVANCED CHIPSET FEATURES...........................................................55
INTEGRATED PERIPHERALS ...................................................................58
POWERMANAGEMENT SETUP ..............................................................62
PNP/PCICONFIGURATION .......................................................................65
PC HEALTH STATUS.................................................................................67
FREQUENCY/VOLTAGECONTROL..........................................................68
LOAD FAIL-SAFE DEFAULTS ...................................................................69
LOADOPTIMIZED DEFAULTS ..................................................................69
SET SUPERVISOR PASSWORD ..............................................................70
SET USER PASSWORD ...........................................................................70
SAVE & EXIT SETUP.................................................................................72
EXITWITHOUTSAVING.............................................................................72
- 4 -
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 10
Jumper Settings >> A Closer Look ...................................................... Page 25
Drivers/Software Utilities >> How to Install ......................................... Page 38
BIOS Setup >> How to Configure ........................................................ Page 44
About This Manual
For First-Time DIY System Builder......................................................... Page 5
For Experienced DIY User ...................................................................... Page 5
For System Integrator ............................................................................. Page 5
WHAT'S IN THE MANUAL
- 5 -
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation3.1 Hardware Installation
3.1 Hardware Installation3.1 Hardware Installation
3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle AB52 mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle AB52 mainboard. You will find
that installing your new Shuttle AB52 mainboard is just easy. Bundled with an
array of onboard functions, the highly-integrated AB52 mainboard provides
you with a total solution to build the most stable and reliable system. Refer to
sections 3.2 Jumper Settings3.2 Jumper Settings
3.2 Jumper Settings3.2 Jumper Settings
3.2 Jumper Settings and Chapter 4 Drivers/Software UtilitiesChapter 4 Drivers/Software Utilities
Chapter 4 Drivers/Software UtilitiesChapter 4 Drivers/Software Utilities
Chapter 4 Drivers/Software Utilities to
find out how to get the best out of your new mainboard. Chapter 5 BIOSChapter 5 BIOS
Chapter 5 BIOSChapter 5 BIOS
Chapter 5 BIOS
SetupSetup
SetupSetup
Setup also contains the relevant information on how to tune up your system to
achieve higher performance.
System Integrator
You have wisely chosen Shuttle AB52 to construct your system. Shuttle AB52
incorporates all the state-of-the-art technology of the Brookdale chipset from
Intel. It integrates the most advanced functions you can find to date in a
compact ATX board.
1INTRODUCTION
- 6 -
1.2 Item Checklist
Check all items with you AB52 mainboard to make sure nothing is missing.
The complete package should include:
One piece of Shuttle AB52 Mainboard
One piece of ATA 100/66100/66
100/66100/66
100/66 Ribbon Cable
One piece of Floppy Ribbon Cable
One piece of twin ports USB Cable (optional)(optional)
(optional)(optional)
(optional)
AB52 User's Manual
One piece of Bundled CD-ROM with containing:
AB52 user's manual saved in PDF format
Intel Chipset System Driver
Onboard Audio controller driver
IDE driver
Award Flashing Utility
IT8712F-A
0227-G
XS
Mf2120
A
mM
e
ga
87
-9
6
c
KB_MS
USB
COM1
COM2 PRT
AUDIO1
DIMM2DIMM1
1
1
1
K
T
S
L
IT
H
IU
M
B
AT
T
E
RY
JA
PA
N
S
T
D
C
r2030
FW
8
280
1B
A
F2
04
013
0
S
L5W
K
IN
TE
L 0Q
C
P
HIL
IPP
IN
ES
S
IR1
1
1
1
1
1
C
A
S
FAN1
C
P
U
FAN1PWRFAN1
IDE1
IDE2
1
1
1
A
T
X
1
RG8
284
5
QC22E
S
C
D
-IN
1
C
D
-IN
2
SP
E
AK
E
R
1
PCI1
AGP
PCI2
PCI3
PCI4
PCI5
PCI6
JP15
US
B1
JP1
PANEL1
FDD1
- 7 -
AB52 mainboard is carefully designed for the demanding PC user who wants high perfor-
mance and maximum intelligent features in a compact package.
2.1 Specifications
CPU Support
Intel Pentium 4/Celeron, 478-pin processors with 400 MHz FSB.
Chipset
Features Intel i82845 (MCH) N.B. and Intel 82801BA (ICH2) S.B..
CPU FSB Configuration
Soft-configuration FSB (The FSB speed is software configurable from 100MHz
to 160MHz).
On Board Channel Hardware Audio Controller
The AC' 97 Audio codec is compliant with the AC'97 2.2 specification, and
supports 18-bit ADC(Analog Digital Converter) and DAC(Digital Analog
Converter) resolution as well as 18-bit stereo full-duplex codec with indepen-
dent and variable sampling rates.
Versatile Memory Support
This mainboard can accommodate 2.5V DDR SDRAM. It accommodates
two unbuffered 2.5V 184 pin slots with total maximum capacity of 2GB.
Expansion Slots
Provides one 32-bit AGP slot which supports 4X AGP devices.( support 1.5V
only)
Provides six 32-bit PCI slots.
4 USB Interface Onboard
2 X USB connectors on back-panel and one sets of dual USB ports headers
on mid-board.
I/O Interface
Provides a variety of I/O interfaces:
1 X Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
1 X PS/2 mouse connector.
2 FEATURES
- 8 -
1 X PS/2 Keyboard connector.
4 X USB ports.
1 X DB9 Serial connectors 16550 UART compatible.
1 X DB25 Parallel port supports Standard Parallel Port and Bi-directional
(SPP), Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
1 X Line-Out port.
1 X Line-In port.
1 X Mic-In port.
1 X MIDI/GAME port.
PCI Bus Master IDE Controller Onboard
Two Ultra DMA 100/66100/66
100/66100/66
100/66 Bus Master Dual-channel IDE ports provide support
to a maximum of four IDE devices (one Master and one Slave per channel).
The IDE Bus implements data transfer speeds of up to 100/66100/66
100/66100/66
100/66 MB/sec and also
supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.
System BIOS
Provides licensed Award BIOS V6.0 PG on Intel Firmware Hub 2Mb Flash
core and supports Green PC, Desktop Management Interface (DMI).
ATX Form Factor
System board conforms to ATX specification.
Board dimension: 305mm X 220mm.
Advanced Features
Low EMI -Low EMI -
Low EMI -Low EMI -
Low EMI - Built in spread spectrum and automatic clock shut-off of
unused PCI/DDR-SDRAMS slots to reduce EMI.
Dual Function Power Button -Dual Function Power Button -
Dual Function Power Button -Dual Function Power Button -
Dual Function Power Button - The system can be in one of two states,
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode.
When the power button is pressed for longer than 4 seconds, the system
enters Soft-Off mode.
Table of contents
Other Shuttle Motherboard manuals
Shuttle
Shuttle SH610R4 Series User manual
Shuttle
Shuttle FN41U User manual
Shuttle
Shuttle ME62 User manual
Shuttle
Shuttle FN45 User manual
Shuttle
Shuttle AB52P User manual
Shuttle
Shuttle FB95 User manual
Shuttle
Shuttle HOT-675Z User manual
Shuttle
Shuttle AB60/R User manual
Shuttle
Shuttle MT63 User manual
Shuttle
Shuttle MS52 User manual
Shuttle
Shuttle AK32A User manual
Shuttle
Shuttle HOT-595 User manual
Shuttle
Shuttle FX83 User manual
Shuttle
Shuttle Spacewalker HOT-685Z User manual
Shuttle
Shuttle HOT-675V User manual
Shuttle
Shuttle MK35V User manual
Shuttle
Shuttle FN25 User manual
Shuttle
Shuttle Spacewalker FE22 User manual
Shuttle
Shuttle AI61 User manual
Shuttle
Shuttle AE25 User manual
