Shuttle FS58 User manual
FS58
Pentium4,LGA775Processor
Based MAIN BOARD
Shuttle®FS58
Pentium 4, LGA 775 Processor Based Mainboard
Copyright
Copyright©2004 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
M981
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName: FS58
S/N:N/A
CPU:
External Frequency: 133 MHz
Intel Pentium 4, LGA 775 Processor: 2.40/ 2.53/ 2.66/ 2.80 GHz
External Frequency: 200 MHz
Intel Pentium 4, LGA 775 Processor: 2.8/ 3/ 3.2/ 3.4/ 3.6 GHz
Serial Port: one port with 9 pins
VGA Port: one port with 15 pins
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB 2.0 Port: four ports with 4 pins respectively
1394 Port: one port with 4 pins and one port with 6 pins respectively
LAN Port: one port with 8 pins (10Mbps/100Mbps)
Center/Bass-Out Port: four ports
Mic-In Ports: one port
Line-In Ports: two ports
SPDIF-Out (Coaxial) Port: one port
SPDIF-Out (Optical) Port: one port
SPDIF-In (Optical) Port: one port
Clear CMOS button: one port
DIMM Memory (optional): DDR 400 256 MB *2
Power Cable: Detachable and Shielded (with a GND pin)
Monitor: CRT+DVI
Maximum Resolution: 1280 X 1024 V:60Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode External Frequency CPU CPU Open/Close
1200MHz P4 3.6 GHz Close
2200MHz P4 3.6 GHz Open
3133MHz P4 2.8 GHz Close
4133MHz P4 2.8 GHz Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X2)/ 25MHz(X6)/32.768KHz(X1)/12MHz(X4)
/24.576MHz(X7)/ 24.576MHz(X5).
ClockGenerator: U4,U5
(D) Supported Host Peripherals:
Host Peripheral Product Name Model Name
# 1 Case FS58
# 2 Power Supply PC40I2503
# 3 SerialATA Westerm Digital WD1200JD-00FYB0
# 4 Panasonic FDD JU-257A606P
# 5 Pioneer DVD Player DVD-116
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Important Safety Information
SAFETY INSTRUCTIONS
1. Pleasereadthese safetyinstructionscarefully.
2. PleasekeepthisUser‘s Manual forlaterreference.
3. PleasedisconnectthisequipmentfromACoutletbeforecleaning.Don‘tuseliquid
orsprayeddetergentfor cleaning.
4. Forpluggableequipment,the socket-outletshallbeinstallednear theequipment
andshallbeeasilyaccessible.
5. Pleasekeepthis equipmentfromhumidity.
6. Laythisequipment onareliablesurface wheninstall.A drop or fallcouldcauseinjury.
7. Donotleavethis equipment inanenvironmentunconditioned,it may damagethe
equipment.
8. Theopeningsonthe enclosure areforairconvectionhence Protect theequipment
fromoverheating.DO NOTCOVERTHEOPENINGS.
9. Makesurethevoltage ofthepowersourcewhen connect theequipmenttothe
poweroutlet.
10. Placethepowercord suchawaythat peoplecannotstep onit.Donot placeanything
overthepower cord.Thepower cordmustberatedfortheproduct andforthevoltage
andcurrentmarkedontheproduct’selectricalratingslabel.Thevoltageandcurrent
ratingofthecord should begreaterthanthevoltage and currentratingmarkedonthe
product.
11. Allcautionsandwarnings on theequipmentshouldbenoted.
12. Iftheequipmentisnotuseforlongtime,disconnectthe equipmentfrommainstoavoid
beingdamagedby transientover-voltage.
13. Neverpouranyliquidintoventilationopenings,thiscouldcausefireorelectricalshock.
14. CAUTION:Thecomputeris provided withabattery-poweredreal-timeclock circuit.
Thereisadangerof explosion if batteryisincorrectlyreplaced.
Replaceonlywith sameorequivalenttype recommendedbythemanufacture.
Discardusedbatteriesaccordingtothe manufacturer’s instructions.
15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITHAPPROPRI-
ATESAFETYSTANDARDSINCLUDINGIEC60825.
CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
CLASS 1 LASER PRODUCT
- 1 -
TABLE OF CONTENTS
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIY USER ........................................................................ 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION.......................................................... 11
3.1 STEP BY STEP INSTALLATION................................................................11
Accessories of FS58..............................................................................11
STEP1CPUInstallation ........................................................................ 12
STEP 2 Set Jumpers............................................................................. 14
STEP3InstallDDRSDRAMSystemMemory........................................ 14
STEP 4Install InternalPeripheralsin System Case ................................ 15
STEP5MounttheMainboardontheComputerChassis........................ 16
STEP6Connect Front-PanelSwitches/LEDs/USBs/1394/Aux-In/Mic-In/
Line-Out ................................................................................................ 16
STEP 7 Connect IDE, Floppy and SerialATADisk Drives ...................... 17
STEP8Connect OtherInternalPeripherals............................................ 18
STEP9InstallAdd-on Cards inExpansion Slots .................................... 20
STEP10ConnectPowerSupply ........................................................... 21
STEP11ConnectExternalPeripheralstoBack-panel ........................... 21
STEP 12 First Time System Boot Up ..................................................... 22
- 2 -
STEP13InstallDriver&SoftwareComponents ..................................... 23
3.2 JUMPER SETTINGS ................................................................................. 24
JUMPERS&CONNECTORSGUIDE.................................................... 25
Back-Panel Connectors
VGAPort............................................................................................... 28
COM Port .............................................................................................. 28
SPDIF-INPort........................................................................................ 28
1394 Port .............................................................................................. 28
PS/2 Keyboard & PS/2 Mouse Ports ..................................................... 28
LANPort ............................................................................................... 29
USB Ports ............................................................................................. 29
SPDIF-OUTRCAPort ........................................................................... 29
Line-InPort ............................................................................................ 29
5.1ChannelBass/Centerport ................................................................ 30
5.1ChannelRear-Outport ..................................................................... 30
5.1ChannelFront-Outport..................................................................... 30
ClearCMOSButton............................................................................... 30
Front-Panel Connector
ATXPowerOn/Off SwitchConnector(PWON) ....................................... 31
HDD LED Connector (HLED) ................................................................ 31
GreenLED/PowerLEDConnector(GLED/PWRLED) ......................... 32
HardwareResetConnector (RST) ......................................................... 32
FrontPanelAUDIO/USB/1394Connector(JP9)................................... 33
Internal Peripherals Connectors
EnhancedIDE,Floppy Connectors ........................................................ 34
Other Connectors
ATXPowerSupplyConnectors(CN5/JP10) .......................................... 35
- 3 -
FanConnectors(FAN1/2/3) ................................................................... 36
SPDIFOUTConnector (JP18)(White).................................................... 36
LINE-IN(J4),CD-IN(CN3),MiniCD-IN(CN4)Connectors ........................ 37
ParallelPortHeader-EXT.PrintPort(JP11) ........................................... 38
WirelessKeyboardandMouseConnectors (JP2).................................. 39
IRConnector(JP13) .............................................................................. 39
USB Header (JP3) ................................................................................ 40
EXT.GPIHeader(JP15)........................................................................ 40
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 41
INSTALLMEMORY................................................................................ 41
UPGRADEMEMORY............................................................................ 41
4 SOFTWARE UTILITY ......................................................................42
4.1 Mainboard CD Overview ......................................................................... 42
4.2 Install Mainboard Software ..................................................................... 43
4.2.A Install SIS AGP Driver ............................................................................ 44
4.2.B Install SIS IDE Driver............................................................................. 44
4.2.C Install SIS VGA Driver ........................................................................... 45
4.2.D Install Realtek LAN Driver..................................................................... 45
4.2.E Install Realtek Audio Driver .................................................................. 46
4.2.F Install SIS USB2.0 Driver....................................................................... 46
4.2.G Install DirectX9 Utility............................................................................ 47
4.3 View the User's Manual........................................................................... 47
5 BIOS SETUP ................................................................................... 48
5.1 Enter the BIOS .......................................................................................... 48
5.2 THE MAIN MENU ...................................................................................... 49
STANDARD CMOS FEATURES ............................................................... 51
- 4 -
ADVANCED BIOS FEATURES ................................................................. 54
ADVANCED CHIPSET FEATURES .......................................................... 58
INTEGRATEDPERIPHERALS .................................................................. 61
POWERMANAGEMENTSETUP.............................................................. 64
PNP/PCICONFIGURATIONS .................................................................... 68
PCHEALTHSTATUS................................................................................ 70
Frequency/VoltageControl......................................................................... 72
LOAD FAIL-SAFE DEFAULTS .................................................................. 74
LOADOPTIMIZEDDEFAULTS ................................................................. 74
SET PASSWORD ..................................................................................... 74
SAVE & EXIT SETUP................................................................................ 75
EXITWITHOUTSAVING ............................................................................ 75
- 5 -
WHAT'S IN THE MANUAL
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look.......................................................Page 24
Drivers/Software Utilities >> How to Install .........................................Page 42
BIOS Setup >> How to Configure.........................................................Page 48
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
Table of contents
Other Shuttle Motherboard manuals
Shuttle
Shuttle AB48 User manual
Shuttle
Shuttle HOT-617 User manual
Shuttle
Shuttle FS56 User manual
Shuttle
Shuttle Spacewalker AB40 User manual
Shuttle
Shuttle MK35 User manual
Shuttle
Shuttle ME21 User manual
Shuttle
Shuttle AB52P User manual
Shuttle
Shuttle FB54 User manual
Shuttle
Shuttle MZ11 User manual
Shuttle
Shuttle FV24 User manual
Shuttle
Shuttle FN95 User manual
Shuttle
Shuttle Spacewalker FE22 User manual
Shuttle
Shuttle ME21 User manual
Shuttle
Shuttle HOT-683 User manual
Shuttle
Shuttle Spacewalker HOT-687 User manual
Shuttle
Shuttle MS52 User manual
Shuttle
Shuttle AB61 User manual
Shuttle
Shuttle Spacewalker AV41 User manual
Shuttle
Shuttle AB60P User manual
Shuttle
Shuttle HOT-433 User manual
