Schmidt RM Series User manual

Thickness Gauge

RM Series

Model RMU-30

RMU-50

RMU-75

RMP-30

Edition RM 01.0.E

Instruction Manual

Valid as of: 05.07.2012• Please keep the manual for future reference!

1 Preparation

Before using the thickness gauge, check the cleanliness of the measuring surface and the

measuring pin. If necessary, clean with a dry, lint-free cloth.

2 Setup

The measuring pin with the upper measuring insert is pressed onto the lower measuring

insert and held in this position or locked with the locking screw.

By pressing the key „OFF / ON“, the measuring instrument is switched on and with the key

„0“ the zero point is adjusted.

With the function key „mm / inch“ you can select the desired scaling.

3 Measuring

The thickness gauge is ergonomically designed and allows a precise and fast measuring

with one hand.

The entire measuring range is available because the movable measuring pin is constantly

guided by spring force in the upper position.

During the measuring process, the material to be measured is scanned by the measuring

inserts.

By means of a finger, the measuring pin is carefully pressed onto the test material and the

measured value is determined.

The function key „0“ allows to set the zero point at any point in the measurement

range. This allows very fast measurements to deviations from given

Tolerances etc. are performed.

The thickness gauge can be switched of by pressing the ON / OFF key.

S C H M I D T

c o n t r o l i n s t r u m e n t s

4 Notes to maintenance

The thickness gauge should be kept dry all the time. Water and other liquids should be kept

away as they endanger the electronics.

The device should not be cleaned with acetone.

Battery replacement is carried out as follows:

1. Open battery compartment in direction of the arrow, remove the lid

2. Replace the old battery, altough paying attention to the correct position of the poles.

Insert the new battery.

3. Insert the battery cover and push toward.

5 Specifications

Measuring Range 0 - 30 mm, 0 - 50 mm, 0 - 75 mm

Scaling 0.01 mm / 0.0005 inch

Display Liquid crystal, height of digits 10 mm

sign (-)

Battery 1 Stück SR 44

Jaw Aluminium alloy, high-strength

Finishing plasticized/galvan. Ni

Mailing address:

P. O. B. 1154

84464 Waldkraiburg Germany

Shipping address:

Schichtstr. 16

84478 Waldkraiburg Germany

Hans Schmidt & Co GmbH

Phone:

int. + 49 / (0)8638 / 9410-0

Fax:

int. + 49 / (0)8638 / 4825

int. + 49 / (0)8638 / 67898

More than 70 years - Worldwide -

e-mail:

[email protected]

Internet:

http://www.hans-schmidt.com

This manual suits for next models

Table of contents

Other Schmidt Measuring Instrument manuals

Schmidt

Schmidt RS8000 User manual

Schmidt

Schmidt MD 10.010 User manual

Schmidt

Schmidt FS Series User manual

Schmidt

Schmidt SS 20.515 User manual

Schmidt

Schmidt FG Series User manual

Schmidt

Schmidt G4 User manual

Schmidt

Schmidt OS8000 User manual

Schmidt

Schmidt IL 30.0 Series User manual

Schmidt

Schmidt DHT-3 User manual

Schmidt

Schmidt ET Series User manual

Schmidt

Schmidt SS 20.415 Twin User manual

Schmidt

Schmidt G2 TRIGGER DEADMAN User manual

Schmidt

Schmidt DNW-100K User manual

Schmidt

Schmidt SS 20.250 User manual

Schmidt

Schmidt DW-D User manual

Schmidt

Schmidt FGP 01.E User manual

Schmidt

Schmidt HTG Series User manual

Schmidt

Schmidt MZ-422 Series User manual

Schmidt

Schmidt Z Series User manual

Schmidt

Schmidt FS1-422 User manual

Schmidt

Schmidt OS8000 User manual

Schmidt

Schmidt D-2005 Series User manual

Schmidt

Schmidt SC Series User manual

Schmidt

Schmidt SS 20.515 LED User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual