Luminance Meter / EN
09/15/17 Version No. 00 5
4. key:
1Backlight function key, press this key to turn on and off the backlight will
switch off automatically after the backlight setting time.
2Press this key for 3 seconds to disable the auto backlight timeout.
5. MX/MN key:
MAX MIN Recording Mode:Press this keytoenterthis recording mode.
Press this key to circulate the reading of Current, Maximum, Minimum,
Maximum-Minimum, and Average.Press this key3 seconds to exit this mode.
6. SET key: Press this key to enter the setting mode.
Press this key for 3 seconds to exit this mode.
SET01 : Measurement unit cd/m
2
or fL setting mode.
SET02 : Real time setting mode.
SET03 : Comparator High/Lowvalue setting mode.
SET04 : User calibration factor value setting mode.
SET05 : Color-correction factor value setting mode.
SET06 : Accumulate luminance measurement on-off setting mode.
SET07 : Auto datalogging interval time setting mode.
SET08 : No-cycle timer datalogging setting mode.
SET09 : Auto-cycle timer datalogging setting mode.
SET10 : Auto power off time setting mode.
SET11 : Backlight time setting mode.
SET12 : Clear the manual memorized data.
SET13 : Clear the auto memorized data.
7. H / AVG key:
1H HOLD key: Press this key momentarily to freeze or unfreeze the
displayed reading.
2AVG key: Press this key for 3 seconds to enter or exit point average
measurement function.
8. △
/
%key:
1Reference quantity measurement mode ( A/B %A B-A ).
Press this key to enter this mode, press this key for 3 seconds to exit this
mode.
2Relative & percent measurement mode (△,%). Press this key for 3 seconds
to enter or exit this mode.
9. ↵key:
1Store the displayed setting value or exit a setting mode.
2Recall the CAF, CCF or other for use in measurement.
