Philips HR1367/01 User manual
HR1367/01
2
3
A
B
C
D
E
F
G
H
I
Q
P
N
O
M
L
K
J
1
4
6
12
18
24
한국어 30
36
43
ภาษาไทย 49
54
繁體中文 60
简体中文 66
77
83
6
Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips offers, register your product at .
Normal speed button
Turbo speed button
Motor unit
Release buttons
Blender bar
Beaker
Beaker lid
Whisk
Whisk coupling unit
Protective cover of blade unit
Pusher
Lid of bowl
Combination disc (slicing/shredding)
Tool holder
Blade unit
Lid release button
Bowl
Read this user manual carefully before you use the appliance and save it for future reference.
- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Only use
a moist cloth to clean the motor unit.
- Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
- Do not use the appliance if the plug, the mains cord or other parts are damaged.
- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Never use your ngers or an object (e.g. a spatula) to push ingredients down the feeding tube
while the appliance is running. Only use the pusher for this purpose.
- Do not touch the blades of the blender bar, especially when the appliance is plugged in. The
blades are very sharp.
- If the blades get stuck, unplug the appliance before you remove the ingredients that block the
blades.
- Be very careful when you handle or clean the blade unit or the combination disc. Their cutting
edges are very sharp. Be especially careful when you clean them and when you empty the bowl.
- Always unplug the appliance after use, before you change accessories or before you approach
parts that move during use.
- This appliance is intended for household use only.
- Do not exceed the quantities and processing times indicated in the tables.
- Do not exceed the maximum level indication on the bowl.
- Do not process more than three batches without interruption. Let the appliance cool down to
room temperature before you continue processing.
- Never use any accessories or parts from other manufacturers or that Philips does
not specically recommend. If you use such accessories or parts, your guarantee becomes
invalid.
- The bowl is not suitable for use in microwave ovens.
This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
This appliance is equipped with overheat protection. If the appliance overheats, it switches off
automatically. Then put the mains
plug back into the wall socket and switch on the appliance again. Please contact your Philips dealer
or an authorised Philips service centre if the overheat protection is activated too often.
Thoroughly clean the parts that come into contact with food before you use the appliance for the
rst time (see chapter ‘Cleaning’).
1 Assemble the appliance properly before you put the plug in the wall socket.
2 Cut large ingredients into pieces of approximately 2cm before you process them.
3 Let hot ingredients cool down before you chop them or pour them into the beaker (max.
temperature 80°C).
The hand blender is intended for:
- blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks and shakes.
- mixing soft ingredients, e.g. pancake batter or mayonnaise.
- pureeing cooked ingredients, e.g. for making baby food.
1 Attach the blender bar to the motor unit (‘click’) (Fig. 2).
2 Put the ingredients in the beaker.
See the table below for the recommended quantities and processing times.
Ingredients Blending quantity Time
Fruits & vegetables 100-200g 30sec.
Baby food, soups & sauces 100-400ml 60sec.
Batters 100-500ml 60sec.
Shakes & mixed drinks 100-1000ml 60sec.
7
3 Immerse the blade guard completely in the ingredients to avoid splashing (Fig. 3).
4 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
Note: When you use the turbo speed button, the appliance operates at maximum speed.
5 Blend the ingredients by moving the appliance slowly up and down and in circles (Fig. 5).
The blade unit is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc.
The blades are very sharp! Be very careful when you handle the blade unit, especially when you
remove it from the bowl, when you empty the bowl and during cleaning.
1 Place the tool holder in the bowl (Fig. 6).
2 Remove the protective cover from the blade unit.
3 Put the blade unit on the tool holder (Fig. 7).
4 Put the ingredients in the bowl.
See the table below for the recommended quantities and processing times.
Ingredients Quantity Time
Parsley 100g 30sec.
Onions & eggs 500g 7 x 1sec.(pulse)
Meat 300g 30sec.
Parmesan 300g ~ 60sec.
Nuts 500g ~ 30sec.
Dark chocolate 200g ~ 45-60sec.
5 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to x it (‘click’) (Fig. 8).
6 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 9).
7 Put the pusher in the feeding tube.
Note: The pusher prevents spillage.
8 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and
loosen the ingredients with a spatula or add some liquid.
Note: Always let the appliance cool down after chopping meat with the blade unit.
9 After processing, press the lid release button on the bowl (1) and then turn the lid clockwise
to remove it (2). (Fig. 10)
- The appliance chops very quickly. Use the normal speed button or the turbo speed button. If
you use the turbo speed button, use it briey to prevent the food from becoming too nely
chopped.
8
- Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise
these ingredients become too hot, start to melt and turn lumpy.
- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and
ice cubes, as this may cause the blade to get blunt.
The combination disc is intended for slicing and shredding vegetables like cucumber, carrots,
potatoes, leek and onions and certain kinds of cheese. One side is intended for slicing and the other
side for shredding. You can switch from slicing to shredding and the other way round by simply
turning the disc.
Never process hard ingredients like ice cubes with the disc.
The cutting edges of the disc are very sharp. Do not touch them.
1 Place the tool holder in the bowl (Fig. 6).
2 Place the combination disc on the tool holder with the slicing or shredding side facing up,
depending on the result you want (Fig. 11).
3 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to x it (‘click’) (Fig. 8).
4 Put the ingredients in the feeding tube.
- Pre-cut large ingredients into chunks that t in the feeding tube.
- Fill the feeding tube evenly for the best results.
- When you have to process a large amount of ingredients, process small batches and empty the
bowl between batches.
- To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator
temperature.
5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 9).
6 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
7 Press the pusher lightly onto the ingredients in the feeding tube.
The whisk is intended for whipping cream, whisking egg whites, desserts etc.
1 Connect the whisk to the coupling unit (Fig. 12).
2 Connect the coupling unit to the motor unit (‘click’) (Fig. 13).
3 Put the ingredients in a bowl.
Ingredients Quantity Time
Cream 250ml 70-90sec.
Egg white 4 eggs 120sec.
Note: Do not process more than 1 batch without interruption. Let the appliance cool down to room
temperature before you continue processing.
4 Immerse the whisk completely in the ingredients. To avoid splashing, start processing at
normal speed by pressing the normal speed button. (Fig. 14)
5 Continue with turbo speed after approx. 1 minute by pressing the turbo speed button.
9
Do not immerse the motor unit, the whisk coupling unit or the lid of the bowl in water. Clean
these parts with a moist cloth.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Clean the blender bar blades, the blade unit and the combination disc very carefully. Their cutting
edges are very sharp.
1 Unplug the appliance.
2 Press the release buttons on the motor unit to remove the blender bar, the whisk coupling
unit or to detach the motor unit from the lid of the bowl.
3 Remove the detachable parts, if any.
4 See the separate cleaning table for further instructions.
5 Put the protective cover on the blade unit after cleaning.
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this you help to preserve the
environment (Fig. 16).
If you need service or information or if you have a problem, please visit the Philips website at
or contact the Philips Consumer Care Centre in your country (you nd its
phone number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
1 Put the blade unit and the combination disc on the tool holder and store them in the bowl.
2 Place the lid on the bowl.
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Solution
The appliance does not
work.
This appliance is equipped with overheat protection. If the appliance
overheats, it switches off automatically. Unplug the appliance and let
it cool down for 5 minutes. Then put the mains plug back into the
wall socket and switch on the appliance again. Please contact your
Philips dealer or an authorised Philips service centre if the overheat
protection is activated too often
The motor unit gives off
an unpleasant smell the
rst few times the
appliance is used.
This is not unusual. If the appliance continues to give off this smell
after a few times, check the quantities you are processing and the
processing time.
10
Table of contents
Languages:
Other Philips Kitchen Appliance manuals
Philips
Philips HR2752 User manual
Philips
Philips HD4518 User manual
Philips
Philips HD3167 User manual
Philips
Philips CA6500 User manual
Philips
Philips HD9650 series User manual
Philips
Philips HR2702/00 User manual
Philips
Philips HD9270 User manual
Philips
Philips HR7954 User manual
Philips
Philips HD4731 User manual
Philips
Philips Cirtus Press HR2737 User manual
Philips
Philips HD3115 User manual
Philips
Philips HD3175 User manual
Philips
Philips HD3095 User manual
Philips
Philips HD3036 User manual
Philips
Philips CA6502/62 User manual
Philips
Philips HD2420/60 User manual
Philips
Philips HD4424 User manual
Philips
Philips SCF280/39 User manual
Philips
Philips GC299 User manual
Philips
Philips HD927X User manual
Popular Kitchen Appliance manuals by other brands
Tayama
Tayama TYG-35AF instruction manual
AEG
AEG 43172V-MN user manual
REBER
REBER Professional 40 Use and maintenance
North American
North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions
Presto
Presto fountain popper instruction manual
Westmark
Westmark 1035 2260 operating instructions
