Philips Essence HR7755 Manual

Essence HR7755

Recipes & Directions for use

Przepisy i instrukcja obsługi

Reţete şi Instrucţiuni de utilizare

Рецепты и Инструкции по эксплуатации

Recepty & Návod k použití

Recepti in navodila za uporabo

Рецепти та інструкції з використання приладу

Pечепти и инструкчии за употреба

Recepti i uputstvo za upotrebu

ENGLISH 6

POL KI 25

ROMÂNĂ 44

РУССКИЙ 62

ČE KY 85

MAGYAR 103

LOVEN KY 122

УКР ЇНСЬКІЙ 141

БЪЛГ РСКИ 161

RP KI 182

HR7755

ENGLISH6

Introduction

This appliance is equipped with an automatic

thermal cut-out system.This system will

automatically cut off the power supply to the

appliance in case of overheating.

General description

AMotor unit

BSpeed control

- P= pulse

- 0 = off

- 1 = lowest speed

- 2 = highest speed

CScrew cap (must be placed to be able to use

food-processing functions)

DFood processing bowl

ETool holder

FLid of food processing bowl

GBlender jar

HBlender jar lid

IFeed tube

JPusher

KStopper

LKneading accessory

MMetal blade + protective cover

NSlicing insert medium

OShredding insert medium

PInsert holder

QEmulsifying disc

RGear housing meat mincer

SCutter housing meat mincer

TWorm shaft

UScrew ring

VCutter unit

WMedium grinding disc, 4 mm dia.

XCoarse grinding disc, 8 mm dia.

YSeparator

ZSausage horn

aTr ay

bPusher

cRelease lever

Important

Read these instructions for use carefully before

using the appliance and save them for future

reference.

◗Check if the voltage indicated on the

appliance corresponds to the local mains

voltage before you connect the appliance.

◗Never use any accessories or parts from

other manufacturers or that have not been

specifically advised by Philips.Your guarantee

will become invalid if such accessories or

parts have been used.

◗In order to avoid a hazardous situation, this

appliance must never be connected to a timer

switch.

◗Do not use the appliance if the mains cord,

the plug or other parts are damaged.

◗If the mains cord is damaged, it must be

replaced by Philips, a service centre

authorised by Philips or similarly qualified

persons in order to avoid a hazard.

ENGLISH 7

◗Thoroughly clean the parts that will come

into contact with food before you use the

appliance for the first time.

◗Do not exceed the quantities and preparation

times indicated in the table.

◗Do not exceed the maximum content

indicated on the food-processing bowl or

blender jar., i.e. do not fill beyond the top

graduation.

◗Unplug the appliance immediately after use.

◗Never use your fingers or an object (e.g. a

spatula) to push ingredients down the feed

tube while the appliance is running. Only the

pusher is to be used for this purpose.

◗Always unplug the appliance before reaching

into the blender jar with your fingers or an

object (e.g. a spatula).

◗Keep the appliance out of the reach of

children.

◗Never let the appliance run unattended.

◗The food-processing functions only work if

the dot on the screw cap is opposite the dot

on the motor unit, the dot on the bowl is

opposite the dot on the motor unit and the

line on the lid is opposite the line on the

bowl. If this is the case, the built-in safety lock

will be deblocked and the appliance can be

switched on.

◗Switch the appliance off before detaching any

accessory.

◗Always switch the appliance off by setting the

speed control to position 0.

◗Wait until moving parts have stopped running

before you remove the lid of the appliance.

◗Never immerse the motor unit in water or any

other liquid, nor rinse it under the tap. Use

only a moist cloth to clean the motor unit.

◗Remove the protective cover from the blade

before use.

◗Never use the cutter unit in combination with

the separator and sausage horn.

◗Do not attempt to grind bones, nuts or other

hard items.

◗Never reach into the tray with your fingers.

Always use the pusher.

◗Let hot ingredients cool down before

processing them in the blender jar (max.

temperature 80cC/175cF).

◗If you are processing a liquid that tends to

foam, do not put more than 1 litre in the

blender jar to avoid spillage.

◗For quantities and preparation times, please

consult the tables in these instructions for

use.

◗Note that it is not possible to use the food-

processing bowl when the blender jar is

mounted on the motor unit.

◗Noise level: Lc= 89 dB [A]

Using the appliance

Thermal safety cut-out

In order to avoid a hazardous situation, this

appliance must never be connected to a timer

switch.

If your appliance suddenly stops running:

ENGLISH8

1Pull the mains plug out of the socket.

2Let the appliance cool down for 60 minutes.

3Put the mains plug in the socket.

4Switch the appliance on again.

BPlease contact your Philips dealer or an authorised

Philips service centre if the automatic thermal cut-

out system is activated very often.

Food-processing bowl

The food-processing bowl only works if the

blender jar is not mounted on the motor unit and

if the screw cap has been screwed onto the

motor unit in such a way that the dot on the

screw cap is directly opposite the dot on the

motor unit.

C1Mount the bowl on the food processor by

turning the handle in the direction of the

arrow until you hear a click.

C2Put the lid on the bowl.Turn the lid in the

direction of the arrow until you hear a

click (this requires some force).

CLICK 2

CLICK

Built-in safety lock

The motor unit, the bowl and the lid have been

provided with marks.The appliance will only

function if the dot on the bowl is directly

opposite the dot on the motor unit.

C1Make sure that the line on the lid and the

line on the bowl are directly opposite each

other.When this is the case, the projection

of the lid will complete the shape of the

handgrip.

Feed tube and pusher

C1Use the feed tube to add liquid and/or

solid ingredients. Use the pusher to push

solid ingredients through the feed tube.

C2You can also use the pusher to close the

feed tube in order to prevent ingredients

from escaping through the feed tube.

Metal blade

The metal blade can be used for chopping, mixing,

blending and pureeing.

The cutting edges of the blade are very sharp

Avoid touching them!

CLICK

ENGLISH 9

C1Remove the protective cover from the

blade.

C2Put the tool holder in the bowl and place

the blade on the tool holder that stands in

the bowl.

3Put the ingredients in the bowl.

BPre-cut large pieces of food into pieces of approx.

3 x 3 x 3 cm. Put the lid on the bowl.

4Put the pusher in the feed tube.

C5Set the speed control to maximum speed

(position 2).

- The process continues until the speed control

is set to position 0 (off).

◗Set the speed control to position 1 to

decrease the speed.

Tips

◗When you chop onions, use the pulse setting

several times to prevent the onions from

becoming too finely chopped.

◗Do not let the appliance run too long when

you are chopping (hard) cheese.The cheese

will become too hot, will start to melt and

will turn lumpy.

◗Do not use the blade to chop very hard

ingredients like coffee beans, nutmeg, turmeric

and ice cubes, as this may cause the blade to

get blunt.

If food sticks to the blade or to the inside of the

bowl:

1Turn the appliance off.

2Remove the lid from the bowl.

3Remove the ingredients from the blade or

from the wall of the bowl with a spatula.

Inserts: slicing and shredding insert

Never process hard ingredients like ice cubes

with the inserts.

The cutting edges of the inserts are very sharp

Avoid touching them!

C1Put the desired insert in the insert holder.

C2Place the insert holder onto the tool

holder that stands in the bowl.

3Put the lid on the bowl.

4Put the ingredients in the feed tube.

BCut large ingredients into pieces that fit into the

feed tube.

CLICK

ENGLISH10

C5Fill the feed tube evenly for the best

results.

BWhen you have to slice or shred large amounts of

food, process only small batches at a time and

empty the bowl regularly between the batches.

C6Set the speed control to maximum speed

(position 2).

The process continues until the speed control is

set to position 0 (off).

◗Set the speed control to position 1 to

decrease the speed.

C7Press the pusher lightly onto the

ingredients in the feed tube.

◗If you are shredding soft vegetables or fruits,

you can decrease the speed by setting the

speed control to position 1 to prevent the

shredded vegetables and fruits from turning

into puree.

C8To remove the insert from the insert

holder, take the insert holder in your

hands with its back pointing towards you.

Push the edges of the insert with your

thumbs to make the insert fall out of the

holder.

Kneading accessory

The kneading accessory can be used for kneading

bread dough and for mixing batters and cake

mixtures.

C1Put the bowl on the motor unit and place

the kneading accessory onto the tool

holder that stands in the bowl.

2Put the ingredients in the bowl and fasten

the lid onto the bowl. Place the pusher in

the feed tube to prevent ingredients from

escaping through the feed tube during the

kneading process.

C3Set the speed control to maximum speed

(position 2).

See the table for the appropriate processing

times.

Emulsifying disc

You can use the emulsifying disc to prepare

mayonnaise, to whip cream and to whisk egg

whites.

C1Put the emulsifying disc onto the tool

holder that stands in the bowl.

2Put the ingredients in the bowl and put the

lid on the bowl.

Table of contents

Languages:

Other Philips Kitchen Appliance manuals

Philips

Philips HD3038 User manual

Philips

Philips HR2939/09 User manual

Philips

Philips HR1055 User manual

Philips

Philips QuickTouch GC515/25 User manual

Philips

Philips HD4749 User manual

Philips

Philips HD3075 User manual

Philips

Philips HR7951 User manual

Philips

Philips HD7006/97 User manual

Philips

Philips HR 1841/CC User manual

Philips

Philips HR7976 User manual

Philips

Philips HD3137 User manual

Philips

Philips HD7008/00 User manual

Philips

Philips HR1377/92 User manual

Philips

Philips HD927X User manual

Philips

Philips Steam&Go GC320 Series User manual

Philips

Philips HD6971 User manual

Philips

Philips HD9226 User manual

Philips

Philips HD4419 User manual

Philips

Philips HD2417/90 User manual

Philips

Philips HD9230 User manual

Philips

Philips HR2826 User manual

Philips

Philips GC362/80 User manual

Philips

Philips HD9227/52 User manual

Philips

Philips HD986 Series User manual

Popular Kitchen Appliance manuals by other brands

Tayama

Tayama TYG-35AF instruction manual

AEG

AEG 43172V-MN user manual

REBER

REBER Professional 40 Use and maintenance

North American

North American BB12482G / TR-F-04-B-NCT-1 Assembly and operating instructions

Presto

Presto fountain popper instruction manual

Westmark

Westmark 1035 2260 operating instructions

Zanussi

Zanussi ZCG64396XA user manual

HOFFEN

HOFFEN SM-9302M instruction manual

Ronco

Ronco Beef Jerky User guide and recipes

Hendi

Hendi 470411 user manual

Livoo

Livoo MEN386 user manual

Vogue

Vogue D446 instruction manual

croydon

croydon WR-10313-700 instruction manual

ADE

ADE AUTOMATIC-L operating instructions

Chefman

Chefman RJ43-SQ Series user guide

Vacmaster

Vacmaster VP680 user guide

Jetmaster

Jetmaster 900HG operating instructions

Küppersbusch

Küppersbusch EEH 610.0 Instructions for use and installation instructions