Panasonic CZ-TACG1 User manual

Model No. CZ-TACG1

USER’S MANUAL

Controller (Network Adaptor)

POWER LINK STATUS

SETUP

HE K

Safety Precautions .................................................2 ~ 3

System Overview..........................................................4

Before Installing the Adaptor ......................................4

Parts IdentiÞcation .......................................................4

Parts...............................................................................5

Adaptor Installation......................................................5

Connecting Network.....................................................6

Starting Panasonic AC controller ...............................6

Use the Panasonic AC controller................................9

Troubleshooting .........................................................14

Information..................................................................15

Firmware Update Function ........................................15

Software License Information ...................................16

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before using this product, and save this

manual for future use.

Table of Contents

Model No. CZ-TACG1

Controller (Network Adaptor) Safety Precautions

ORead the following “SAFETY PRECAUTIONS” carefully before

installation.

OElectrical work must be installed by a licensed electrician. Be

sure to use the correct rating and main circuit for the model to

be installed.

OThe caution items stated here must be followed because

these important contents are related to safety. The meaning of

each indication used is as below. Incorrect installation due to

ignoring of the instruction will cause harm or damage, and the

seriousness is classiﬁed by the following indications.

OPlease provide this setup guide to the user after installation.

Instruct user to keep it with the instruction manuals of the air

conditioner in safe location.

WARNING This indication shows the possibility

of causing death or serious injury.

CAUTION

This indication shows the possibility

of causing injury or damage to

properties.

The items to be followed are classiﬁed by the symbols:

Symbol with white background denotes item that is

PROHIBITED from doing.

Symbol with dark background denotes item that must

be carried out.

WARNING

ODo not set up in places where there is a lot of

steam, such as bathrooms.

- This can cause electric shock or ignition due to

shorting.

ODo not disassemble or modify.

- This can cause electric shock or ignition.

ODo not touch with wet hands.

- This can cause electric shock or ignition due to

shorting.

ODo not set up in hospitals or places where

electronic medical devices are located.

- Radio waves emitting from this adaptor may interfere

with electronic medical devices and cause them to

malfunction.

ODo not set up where children can reach the adaptor.

- They may pull on it or cause themselves an injury.

ODo not wipe with wet cloths or wash in water.

- This can cause electric shock or ignition.

WARNING

OThis appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

ORequest installation only from the place of purchase

or an installer.

- Not doing so may cause electric shock or ignition.

OShut off the power supply when installing this

adaptor.

- Not doing so may cause electric shock.

OUse only the speciÞed parts when installing the

adaptor and perform the installation correctly by

following the instructions.

- Not doing so may cause electric shock or ignition.

OEnsure cables are installed properly so that external

forces cannot affect them.

- Not doing so may cause overheating which can lead

to ignition.

OStop use as soon as you notice any problems or

malfunctions and shut off the electric supply to the

connected appliance.

- Not doing so may cause smoke, ignition, electric

shock, or burns.

- Examples of problems and malfunctions

• There is a burning smell

• Water or a foreign object has gotten inside

oImmediately request repair from the place of

purchase or the installer.

CAUTION

OThe adaptor is indoor use only. Do not set up

outside or in unsecured locations.

- It may provide an entry point for unauthorised network

access.

ODo not set up in locations exposed to direct

sunlight, where the temperature may exceed 40°C or

go below 0°C.

- This can cause deformation.

ODo not install in locations where oils are used a lot

or where steam or sulphurous gases are emitted.

- This can cause loss of performance or deformation.

OBefore connecting wires and cables, discharge any

static electricity.

- Not doing so may cause malfunction.

System Overview

CAUTION

ODo not stand on an unstable surface when operating

or checking the adaptor.

- This can cause injury from falls.

Indoor unit

Network adaptor

CZ-TACG1

Wireless LAN

Router

Internet

Before Installing the Adaptor

• Requires a Smartphone that is iOS/Android compatible;

• The Network adaptor (adaptor) is designed speciﬁcally as a terminal for the

Panasonic AC controller;

• Do not attach the adaptor to metal as wireless performance will be adversely

affected;

• The adaptor recommended to be installed outside of the indoor unit. (It needs to

be accessed when connecting it or when there is a problem.);

• The Wireless LAN network coverage must include the air conditioner installation

location;

• Do connect the Wireless LAN to a compatible Panasonic Air Conditioner with a

connectivity interface port.

Speciﬁcation

Input Voltage DC 12V (From air conditioner indoor unit)

Power consumption Max: 660 mW

Size 66 mm (H) x 36 mm (W) x 12 mm (D)

Weight Approx. 85g

Interface 1x Wireless LAN

Wireless LAN standard IEEE 802.11 b/g/n

Frequency range 2.4 GHz band

Encryption WPA2-PSK (TKIP/AES)

Parts IdentiÞcation

321

No Item Description

1 Power LED Indicates that the adaptor is being supplied with

power.

2 Link LED Indicate the communication status of adaptor to

the server.

3 Status LED Indicate the communication status of adaptor to

the air-conditional.

Green: status without weekly timer

Orange: status with weekly timer

Red: Abnormality

Red oOrange oGreen : Auto updating

adaptor ﬁrmware

During signal strength checking:-

Strong: OO{OO{OO{{{{{{

Medium: OO{OO{{{{{{

Weak: OO{{{{{{

No signal: {{{{{

4 Setup Switch* Connection setup mode switching

5 Check Switch* Signal strength checking (press and hold for 5

seconds then release)

Disable LEDs display (press and hold for 10

seconds then release)

6 Reset* Soft reset

* The device factory reset can be done by press and hold CHECK and SETUP

button for 10 seconds. After release the CHECK and SETUP button, press the

reset button.

Parts

Adaptor Unit

(CZ-TACG1)

POWER LINK STATUS

SETUP

HE K

Screw for mounting

(M4 x 20 – 1 piece)

Mounting cord clamp

(1 piece)

Cable tie (1 piece)

Double-sided

adhesive tape

Wall plug

Adaptor Installation

1. Attach the Adaptor unit with double-sided adhesive tape

on the wall near the indoor unit.

- Shut off the power supply when installing this adaptor.

- Make sure the wall is clean and free from dirt.

Adaptor

Adhesive tape

Wall

2. Use the cord clamp to Þx the cable to the wall.

Pull the cable around as shown in the diagram so that the external force cannot

act on the connector in the adaptor. Furthermore, on the indoor unit end, use

the included cable tie to ﬁx the cables together when necessary.

L N 1 2 3 Cable tie

Cord clamp

General illustration for

installation use

3. Connect the cable to the CN-CNT connector at the indoor

unit.

Take note each indoor unit CN-CNT connector location might be different.

Please consult authorized dealer.

Connecting Network

Establish network connection to the internet via Wireless mode.

1. Turn on the power supply to the indoor unit.

- The Power LED lights (green).

- The Status LED blinking (green).

S TA T U S L I N K P O W E R

2. Download and install the Panasonic AC controller.

3. Follow the instruction of the app to complete the

installation setup. Refer to next page.

- All LEDs lights (green).

S TA T U S L I N K P O W E R

Starting Panasonic AC controller

Use a Smartphone that is iOS/Android compatible.

• User interface image may change without notiﬁcation.

• There is no charge for using this application. However, other charges may be

incurred for connection and operation.

• Updates to the service may mean there are changes to the design of the screen

and display.

1. Login to the Panasonic AC controller

Panasonic ID can be registered free from the link on the

page or at the following URL.

(https://csapl.pcpf.panasonic.com/Account/Register 001)

2. Connection Guide

i. At My Home screen, tap “+” to add new product.

ii. Select the product that you want to add.

iii. Tap “Start” to begin the connection setup.

iv. Tap “Next” after conﬁrming the POWER LED of the

network adaptor is ON.

v. If you are the ﬁrst user (administrator) to operate the

air conditioner via this application, reset the network

adaptor with a pin and tap “Next”.

vi. Choose the button that matches the status of LINK

LED on the network adaptor.

vii. Tap on the preferred connection setup mode.

- To “Connect with WPS mode”, proceed to

instruction 3.1 (For router that supports WPS)

- To “Connect with AP mode”, proceed to instruction

3.2 (For router that does not support WPS)

3.1 Connect with WPS Mode

i. Press the “WPS” button on the router to establish

connection.

ii. Tap “Next” after the router is ready for connection.

iii. Press and hold the “SETUP” button on the network

adaptor for 5 seconds.

iv. Release the “SETUP” button when both STATUS

LED and LINK LED start to blink. Tap “NEXT”.

v. Wait until LINK LED is ON indicates the connection

setup is complete. Tap “NEXT” and proceed to

instruction 4.

3.2 Connect with AP Mode

i. Press and hold the “SETUP” button on the network

adaptor for 10 seconds.

ii. Release the “SETUP” button when the STATUS LED

starts to blink in orange.

iii. Tap “NEXT”.

iv. Tap “To wireless network settings of the smartphone”

to change the wireless network connection of the

smartphone to the following network, the smartphone

will connect to the network adaptor.

SSID: Panasonic-CZ-T-wirelessAP

Password: Rac8pswa

v. A window will prompt, tap “Copy password and next”

to proceed to smartphone wireless network setting.

vi. Connect to “Panasonic-CZ-T-wirelessAP” network

and back to the application to continue with the

setup.

vii. Tap “To wireless network setting” to setup the

wireless network connection of the network

adaptor.

viii. Connect the network adaptor to wireless router.

Select your wireless router.

ix. Enter the password of the selected wireless router.

x. The LINK LED will light up when the network

adaptor successfully connects to the server.

Tap “NEXT” and proceed to instruction 4.



 



 







 





 

























 































 























































 



















  

4. Setup completion

i. Input the Device ID. Device ID is written at name

plate attached to the network adaptor or label

attached on the packaging.

ii. Set the password for the network adaptor.

iii. Tap “Register” to complete the setup.

iv. You can name the air conditioner unit to help you

identify it.

Use the Panasonic AC controller

User's manual can be found under Menu tab.

The Panasonic AC controller is connected to the

network adaptor and ready for use.

Install and launch the app

Panasonic AC controller

(Android 4.4 and above)

Panasonic AC controller

(iOS 9 and above)

Home Screen

Panasonic ID

Password

Reset Panasonic ID / Password

Start a demostration

Main Menu (Page 10)

1st Group

Device

2nd Group

Add new device

Main Menu

Options for administrator only

User list (Page 10)

Change device password (Page 10)

Replace the device (Page 11)

Change router setting (Page 11)

List of device (Page 11)

List of group (Page 12)

Change the language of the app

User Manual

Logout from current Panasonic ID

User list

Change of device password

Edit the name of the user

Enable control of user

User’s control rights

Input old password

Input new password

Retype new password

Edit / delete the user control

Other manuals for CZ-TACG1

Other Panasonic Controllers manuals

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic FP0H Series User manual

Panasonic

Panasonic AFP7CPS4E User manual

Panasonic

Panasonic GM1 Series User manual

Panasonic

Panasonic MINAS S-series User manual

Panasonic

Panasonic FP-E Owner's manual

Panasonic

Panasonic PAW-HPM 1 User manual

Panasonic

Panasonic SQ4-C11 User manual

Panasonic

Panasonic FV-WCCS1-W User manual

Panasonic

Panasonic CZ-256ESMC2U User manual

Panasonic

Panasonic AFP7MC16EC User manual

Panasonic

Panasonic FP0 Series User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic FP0-A21 User manual

Panasonic

Panasonic FP7 Series Parts list manual

Panasonic

Panasonic CZ-64ESMC3 User manual

Panasonic

Panasonic FMU User manual

Panasonic

Panasonic CZ-ANC3 User manual

Panasonic

Panasonic CZ-256ESMC1U User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic AW-RP60GJS User manual

Panasonic

Panasonic CZ-64ESMC2 User manual

Panasonic

Panasonic FP7 Series User manual

Panasonic

Panasonic FP7 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide

KUHN

KUHN TKS user manual