Digitus Type-C DA-70166 User manual
USB Type-C™ to Serial Adapter
Quick Installation Guide
DA-70166
This is elegant way to connect serial devices, for example weather stations,
sensors, motor controls, set-top-boxes, gaming consoles…etc. via USB. The high
compatibility guarantees transfer rates from more than 1Mbps.
For Windows
Installing Drivers
To install drivers for a DA-70166 device under Windows 7, follow the instructions below:
Connect the device to a spare USB port on your PC.
If there is an available Internet connection, Windows 7 will connect to the
Windows Update website and install any suitable driver it finds for the device.
If the automatic installation takes place there is no need to continue with the
procedure outlined below.
If no suitable driver is automatically found then the following procedure should
be followed. Press the Windows start button to bring up the start menu and
select “Control Panel”.
From the Control Panel window select Hardware and Sound
At the next screen select Device Manager:
In the Device Manager window there will be a device under Other Devices with a
yellow warning symbol to indicate a problem, i.e. no driver installed. The text next to
this device will depend on the device attached. In this example the device was a
TTL232R device.
Right click on the other device (TTL232R in this example) to bring up a menu as
shown below.
From the displayed menu select “Update Driver Software…”
This then displays the option for an automatic search or a manual search.
Select the second option to browse manually.
In the address box put the exact location where the drivers have been saved to. This
may be on a CD or in a folder on the PC. It is not necessarily the exact same location
as shown in the screenshot. The drivers could have been saved anywhere of the
users choosing.
After entering the address select “NEXT” to start the installation.
When the installation has finished a completion screen is displayed.
Press Close to close this window and go back to the Device Manager Window.
The Device Manager will still show a device under Other Devices but in addition to
this there is a new entry under Universal Serial Bus Controllers indicated in the
screenshot above as the USB Serial Converter. This indicates the bus layer of the
driver is installed. Installing the Virtual Com Port layer of the driver is almost a repeat
of the last few steps. Right click on the other device (TTL232R in this example) to
bring up a menu as shown below.
From the displayed menu select “Update Driver Software…” This displays the option
for an automatic search or a manual search.
Select the second option to browse manually.
In the address box put the exact location where the drivers have been saved to. This
may be on a CD or in a folder on the PC. It is not necessarily the exact same location
as shown in the screenshot. The drivers could have been saved anywhere of the
users choosing. After entering the address select “NEXT” to start the installation.
When the installation is finished a completion screen is displayed.
Note this screen also displays the COM port assigned to the device.
Press Close to close this window and go back to the Device Manager Window.
This time the Device Manager does not have a TTL232R entry under Other Devices
but does show entries under Universal Serial Bus Controllers and Ports (COM & LPT).
The above screen shot displays a correct installation. The device is now ready to use
on COM3.
NOTE: Not all devices will install to COM3. The COM port allocation is determined by
the installation wizard on the basis of the next free com port as designated in the PC
registry.
Uninstalling DA-70166 Devices
DA-70166 has produced an uninstaller application called CDM Uninstaller.
Devices can also be removed by using the Device Manager by simply right-clicking on
the mouse and selecting "Uninstall". This will delete the associated registry entries
for that device only. Windows 7 provides an automatic method to delete
This stage is done twice. Once for the device under Ports (COM & LPT) and once for
the device under Universal Serial USB Controllers. Windows 2000, XP and Server
2003 do not have this check box, so driver files and OEM INF and PNF files must be
removed manually or by using a custom application.
Table of contents
Other Digitus Adapter manuals
Digitus
Digitus DA-10070 User manual
Digitus
Digitus DA-71101 User manual
Digitus
Digitus DA-70878 User manual
Digitus
Digitus DN-70542 User manual
Digitus
Digitus DA-70850 User manual
Digitus
Digitus DN-7056 User manual
Digitus
Digitus DN-10180 User manual
Digitus
Digitus DA-10170 User manual
Digitus
Digitus DN-15021 User manual
Digitus
Digitus DN-70566-1 User manual
Digitus
Digitus DN-3027 User manual
Digitus
Digitus DA-10196 User manual
Digitus
Digitus DA-70156 User manual
Digitus
Digitus DA-70853 User manual
Digitus
Digitus DA-70200-1 User manual
Digitus
Digitus WIRELESS 300N AUTO INSTALLATION USB ADAPTER User manual
Digitus
Digitus DN-10050-1 User manual
Digitus
Digitus DA-70617 User manual
Digitus
Digitus DA-10060 User manual
Digitus
Digitus Wireless 150N PCI Adapter User manual
