Digitus DN-30210 User manual
BLUETOOTH 4.0
TINY USB ADAPTER
User Manual
DN-30210
Content
INSTALLING THE BLUETOOTH STACK .....................................................................................1
PAIRING YOUR BLUETOOTH DEVICES ...................................................................................7
SENDING DATA FROM YOUR PHONE .....................................................................................14
SENDING FILES FROM YOUR PC .............................................................................................16
MAKING YOUR PC DISCOVERABLE........................................................................................19
PRINTING TO A BLUETOOTH PRINTER ..................................................................................20
CONNECTING TO A BLUETOOTH AUDIO................................................................................20
BLUETOOTH SHARE..................................................................................................................22
BLUETOOTH PIM INTERFACE ................................................................................................ 23
BLUETOOTH DIAL UP.............................................................................................................. 24
BLUETOOTH OPTIONS ..............................................................................................................25
BLUETOOTH HARDWARE.........................................................................................................26
1
Installing
the
Bluetooth
Stack
Note: Before you install, please remove any Bluetooth software and
hardware.
The installation & driver CD will automatically activate the autorun installation program
after you insert the disk into your CD drive.
Setup Wizard
Screen – AutoPlay
• Click Run setup.exe to continue installation.
Screen – Preparing installation
2
Screen – Plug Bluetooth device
• Plug Bluetooth device to USB interface
Screen – Continue to installation
Screen – Welcome to install Bluetooth stack
3
Screen – Read End User License Agreement
Screen – Choose Bluetooth installation folder
4
Screen – Ready to installation
Screen – Coping files process
5
Screen – Installation Completed
Screen – Activate Bluetooth device after rebooting
6
Using the Bluetooth Stack
When you plug in your Bluetooth adaptor for the first time Windows will detect it and install
the Bluetooth stack. At this point it will ask you to give your PC a name. This is the name
that other devices will see if you make your PC visible to them. Use a name that is
memorable.
Once the USB adaptor is installed you will see a Bluetooth icon on the task bar at the
bottom right of the screen. If you click on it (both right and left click work the same way),
you will get a list of options.
If you do not have a Bluetooth icon, open up Control Panel -> Hardware & Sound ->
Setup a Bluetooth enabled device. Go to the Options Tab and check the final box on
the page – Show the Bluetooth icon in the notification area
7
Pairing your Bluetooth
devices
Pairing is a feature of Bluetooth that allows devices to make secure connections. Although
you do not always need to pair devices to exchange data, if you are likely to send
information between them on a regular basis it is a good idea to do so.
To pair a device using the Bluetooth stack you need to click on the Bluetooth Icon in the
task bar and then select Add a Bluetooth Device.
Click Add. Read the instructions, and once you’ve done these, check the box My device is
set up and ready to be found and press Next.
8
Your PC will then start looking for Bluetooth devices that are discoverable and within
range.This may take up to a minute. You will then be given a list of the devices that
have been found. If your phone or PDA does not appear on the list then it is probably
because it has been set up as hidden or non-discoverable. Dig out the manual (that thing
you didn’t get around to reading) and find out how to make it visible. Then try again by
pressing Search Again.
Once your device has appeared on the list, highlight it and press Next.
To ensure a secure connection between the devices, you will need to enter a passkey on
both the other Bluetooth device and your PC. This is used to generate a secure code that
will be used to authenticate the device and your PC every time they connect to each other.
For phones and PDAs you can make this passkey up yourself. You don’t need to
remember it - it is only ever needed the first time you pair the devices.
To make things easier (and more secure) Windows can generate a random number for
you to use as the passcode. Choose that option (Choose a passkey for me) and press
Next.
Table of contents
Other Digitus Adapter manuals
Digitus
Digitus DN-15021 User manual
Digitus
Digitus AC600 User manual
Digitus
Digitus DN-10150-1 User manual
Digitus
Digitus DA-10070 User manual
Digitus
Digitus DN-70560 User manual
Digitus
Digitus Type-C DA-70166 User manual
Digitus
Digitus DN-70543 User manual
Digitus
Digitus DN-70566-1 User manual
Digitus
Digitus DA-70300-1 User manual
Digitus
Digitus DA-70453 User manual
Digitus
Digitus DA-10060 User manual
Digitus
Digitus DN-7056 User manual
Digitus
Digitus DN-70560 User manual
Digitus
Digitus USB 2.0 User manual
Digitus
Digitus DA-71101 User manual
Digitus
Digitus DA-70844 User manual
Digitus
Digitus DA-70855 User manual
Digitus
Digitus DN-3024 User manual
Digitus
Digitus DN-7003GS User manual
Digitus
Digitus DA-70148-2 User manual
