OPERATOR’S MANUAL
8/ INTRODUCTION
mini GAC
®
2500
6010546 Rev C
BATTERY
A 9V lithium battery is included in select models only. A low
battery voltage menu will appear when battery life has almost
reached capacity. The unit is still capable of making accurate
measurements, but the battery should be replaced soon.
IMPORTANT: Leaving Bluetooth in the “Always On” mode
has the potential to drain the battery (select
models only)
A dead battery warning displays when the battery has reached
its end of life and is no longer capable of making accurate
measurements. The unit will no longer perform any functions
other than to power off the device. If a dead battery warning
displays prior to saving some settings, the information could
potentially be lost.
Battery life is prolonged by reducing the Power Down setting of
inactivity. The power down setting range is selectable from 10 to
90 seconds. The default setting is 30 seconds. Lithium battery
replacements are recommended when required.
on/off
home
IMPORTANT: Follow your local government
regulations on disposal and recycling of
lithiumbatteries.
SWITCHPAD FUNCTIONS
ON/OFF/HOME
The On/Off/Home button is pressed momentarily to power the
unit On and held for 2 seconds to power the unit Off.
Pressing the Home button on any page will discard any changes
and return to the Home menu.
ENTER
The Enter button is pressed to start a measurement from the
Home menu. The Enter button is also used to make a menu
selection, and if applicable, save the selection and return to
the Home menu.
In addition, pressing the Enter button from the Home
menu and holding for 4 seconds activates the Bluetooth
communication function and begins searching for a paired
device (select models only).
