D-Link DCS-6620G - Network Camera User manual
2 D-Link Systems, Inc.
DCS-6620G Install GuideSystem Requirements
System Requirements
Minimum System Requirements:
Internet Explorer Version 6.0 or above
CPU Pentium 4, 2.0GHz plus processor
Memory Size: 128MB or above
32MB AGP Video Card
Package Contents
D-Link Systems, Inc. 3
DCS-6620G Install Guide Hardware Overview
Hardware Overview
Front
Power LED
Link LED
Built-In
Microphone
Motorized Zoom Lens
4 D-Link Systems, Inc.
DCS-6620G Install GuideHardware Overview
Rear
Connect the power adapter jack to the 802.11g PTZ Internet Camera
before
plugging in to the power socket. This will reduce the risk of accidental
electric shock.
A/V out
External I/O Port
External Mic.
Ethernet 10/100 RJ45 socket
Power Cord socket
Antennas
D-Link Systems, Inc. 5
DCS-6620G Install Guide Hardware Installation
Hardware Installation
Connect the Ethernet Cable
Connect one end of the Ethernet cable to the
network cable connector located on the back
panel of the DCS-6620G, and attach the other
end to a router, switch, or
gateway on the
network.
If you connect this camera directly
to a PC, you will need a cross-over
Ethernet cable. If you plug the camera into
a hub or router,
you will be able to use the
cable included
with your camera.
Attach the External Power Supply
Attach the external power supply to the DC power
input connector located on the backpanel
of the
DCS-6620G (labeled 12V), and connect it to
an AC power outlet.
Power source is confirmed
when the LED Power Indicator
on the 802.11g PTZ Internet Camera
is illuminated.
Both the red and green LEDs will flash alternately
and only the red LED will remain lit. The green
LED will not come on until you have configured
your
camera.
Attach the Antennas
Attach the two antennas to the connectors
located on the back panel of the DCS-6620G
.
It is required that an Ethernet cable
is used during initial setup
. Once
your wireless
configuration is set, you may
disconnect the Ethernet cable and reboot
your camera to connect to your wireless
network.
6 D-Link Systems, Inc.
DCS-6620G Install GuideHardware Installation (continued)
Attach the A/V cable to the A/V out
connector if you wish to connect the
DCS-6620G to your TV set.
Attach the yellow RCA connector to
the “video” connector on your TV.
Attach the white RCA cable to the
“audio” connector on your TV set.
D-Link Systems, Inc. 7
DCS-6620G Install Guide Installation Wizard
Installation Wizard
Insert the DCS-6620G CD into
the CD-ROM drive of your PC.
Click on Install Software
Click on Install Wizard
Click Next
8 D-Link Systems, Inc.
DCS-6620G Install GuideInstallation Wizard (continued)
Click Next
Click Next
Click Finish
D-Link Systems, Inc. 9
DCS-6620G Install Guide Camera Configuration
Camera Configuration
The software will search for cameras.
Double-click on the Installation
Wizard icon, which should have
been created on your desktop.
The Installation Wizard will now show
a MAC address of the DCS-6620G
and an IP Address (which may or may
not be correct depending on what you
have your DCS-6620G connected to).
If you have a DHCP* server on your
network
, there will be a valid IP Address
displayed
here. After a few seconds, the
“assigned” column will display yes
,
indicating that the displayed IP
Address
is now assigned to the camera.
*A DHCP server is a device that supplies IP Addresses to
its clients that are on the same network.
10 D-Link Systems, Inc.
DCS-6620G Install GuideCamera Configuration (continued)
If the Installation Wizard does not display
any devices, you will need to find a
tool small enough to fit into the reset
hole and softly press down a switch for
2 cycles (about 5-7 seconds). The red
and green LEDs will blink continuously
and stop twice. Let go when the red
LED starts to flash the second time.
Once the camera appears,
select the camera by placing
a Checkmark in the box.
Click Search to refresh the
list of cameras if needed.
Other manuals for DCS-6620G - Network Camera
3
Table of contents
Other D-Link IP Camera manuals
D-Link
D-Link DCS-5610 User manual
D-Link
D-Link SECURICAM Network DCS-2100+ User manual
D-Link
D-Link DCS-942L Installation guide
D-Link
D-Link DCS-1000 User manual
D-Link
D-Link SECURICAM Network DCS-900 User manual
D-Link
D-Link SECURICAM Network DCS-3220G User manual
D-Link
D-Link DCS-3420 User manual
D-Link
D-Link DHA-390 User manual
D-Link
D-Link SECURICAM Network DCS-5300W User manual
D-Link
D-Link SECURICAM Network DCS-6620 User manual
D-Link
D-Link SECURICAM Network DCS-900 User manual
D-Link
D-Link WIRELESS G DCS-950G User manual
D-Link
D-Link SECURICAM Network DCS-2100+ User manual
D-Link
D-Link DCS-5222L User manual
D-Link
D-Link DCS-1000 User manual
D-Link
D-Link Air DCS-1000W User manual
D-Link
D-Link SECURICAM Network DCS-5300W User manual
D-Link
D-Link DCS-6620G - Network Camera User manual
D-Link
D-Link WIRELESS G DCS-950G User manual
D-Link
D-Link DCS-1110 - Network Camera User manual
