Vitek VTC-IR403-212NP User manual
FEATURES:
• 1/2.8” Sony® 3.23 MegaPixel RGB Bayer Array CMOS
• Up to 30fps live view @ 2048 x 1536 (3.15 MegaPixel)
• MegaPixel IR Corrected 2.8-12mm Motorized Varifocal Lens with 1 click
focus for easy Configuration or MegaPixel IR Corrected 5-50mm Varifocal
Auto Iris Lens with External Adjustments for Focus and Zoom
• 40 Dynamic Infrared LEDs at 850nm enable viewing in total darkness up to
150 feet
• Dual Glass Compartments to Eliminate IR Reflection
• XD-DNR (2D-DNR + 3D-DNR) Noise Reduction
• True Day/Night by ICR - Dual Filter Switch
• Triple Streaming (H.264/MJPEG) offering Extensive Integration Possibilities
• Real-time Lens Distortion Correction (LDC) for an optically correct picture
• Compliance with the latest Onvif Profile S
• On-board network security with IP address filtering
• Advanced OSD Features including Image Stabilization & Corridor Mode
• MicroSD memory card slot for Local recording supporting up to 128GB
MicroSDXC cards
• 3-Axis mount with Simple One Turn Positioning Lock for Ease of Installation
• IP-68 Rated Water Resistance
• 12VDC, 24VAC and PoE (Power over Ethernet) Operation
VTC-IR403-212NP
VTC-IR403-550NP
Virtuoso Series 3.15MP WDR
IP Cameras with 40 IR LEDs
QUICK START GUIDE
PLEASE NOTE:
Complete user guide available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Manuals/Virtuoso-IP_Operation-Manual.pdf
VITEK
VITEK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Safety Precaution
2 3
Composition
Dimensions
Installation CD
Coupler for
RJ45 Cable (1pc)
Wiring Connector
(1pc)
Cable Signal
Sticker
Torque Wrench:
3mm (1pc)
Mounting Screw:
4 x 40mm (3pcs)
Plastic Anchor:
6 x 30mm (3pcs)
Mounting Template
Quich Start
Guide
Camera
Easy
Bracket
Assembly Screw:
4 x 15mm (4pcs)
4.35”
3.53”
4.37”
3.94”
3.31”
3.39”
3.15”
10.11”
3
Part Names
• Extreme care should be taken NOT to scratch the window in front of lens.
• Care should be taken that the cable is NOT damaged, kinked, or exposed in
a hazardous area.
• Do not point the camera lens directly at the sun or a spot light.
CAUTION
Cover Open
Micro
SD Card Slot
Reset Button
DUAL WINDOW
SUNSHIELD BOLT
SUNSHIELD
FRONT CASE
BRACKET
EASY
BRACKET
REAR CASE
POWER CABLE
4 5
Installation Instructions
Mounting Screw
: 4x30mm
Plastic Anchor
: 6x30mm
1
2
Torque Wrench
REAR VIEW
3
Cable exit
4
Assembly Screw
: 4x14mm
1. Place the mounting template at the installation position and drill the ceiling or
wall if needed. ( *The easy bracket can not be installed on the ceiling)
2. Place the easy bracket on pre-drilled position and attach using mounting
screws(4x30mm). Skip this step when an easy bracket is not installed.
3. Route the power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.
4. Attach the camera bracket using assembly screws (4x14mm).
5. Set the camera’s viewing angle.
6. Install the sunshield on to the camera unit and tighten the sunshield-bolt.
5
Installation Instructions
Pan & Tilt adjustments
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
• Unlock the screw on the camera bracket using the torque wrench supplied
• Set the camera’s viewing angle then lock the screw on the bracket.
90° 90°
80°
90°
•on the wall•on the ceiling
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
±90°
Torque
wrench
Lock/Unlock
Screw
■Adjustment of viewing angle
with one-touch 3-Axis bracket
Zoom & Focus adjustments (VTC-IR403-550NP Only)
• Turn the Focus gear to “N”(Near) or “∞”(Far)
until the sharpest focus is made.
• To widen the viewing angle, turn the Zoom to
“W”(Wide) and to obtain a closer view, turn it
to “T”(Tele)
Use the torque wrench supplied.
6 7
Virtuoso Quick Start Guide
1. Operating System
• Windows Vista (32 bit) Ultimate, Business Edition
• Windows 7, 8, 10 (32/64 bit) Ultimate, Professional Edition
2. Processor
• Intel Core 2 Duo 2.4 GHz or higher (for using 1920*1080 30 fps)
• Intel Core i7 2.8 GHz or higher (for using 2048*1536 30fps)
3. Memory
• 2 GB or more
4. Resolution
• 1280X1024 pixels or higher (32 bit color)
5. Web Browser
• Microsoft Internet Explorer Ver. 9.0, 10.0 or Higher
• Safari Ver. 4.0 (Plug-in free viewer only)
• Google Chrome Ver. 4.0 (Plug-in free viewer only)
1. PC Requirements
1. Open IP MANAGER
2. Highlight the camera and right click
3. Click the “Change IP” button.
4. Input IP Address and Subnet, Gateway and click the button “OK”.
2. IP Manager
The IP Manager can be installed by locating the program on the enclosed CD or
visiting: www.vitekcctv.com/support/downloads
7
Virtuoso Quick Start Guide
1. Open Web browser
2. Type IP address
• Enter the camera’s IP address in
Internet Explorer® address bar.
• The default IP address is 192.168.0.10
• The default User ID and Password is
admin / admin
3. Accessing the IP Camera
4. Live View Page
The network camera’s Live View page appears in your browser after successful login.
ICONS:
Live: Displays live video.
Setup: Enters setup menu.
Exit: Exit current login and/or Enter new login.
Snapshot: Take a picture of the video image currently on display. Supports
original image size, view, print, and save feature.
Zoom: Supports a digital zoom in live video image.
Full screen: Expand the current windows into maximum monitor size.
Information: Shows the current major setting status.
LEFT COLUMN SETTINGS:
Stream: Specify the viewable video stream source to display in live view page.
Screen Ratio: Specify the viewable video size to display in live view page.
Event Action: Used to start or stop an event manually according to event
8 9
Virtuoso Quick Start Guide
The Information shows the camera basic information such as Model name, MAC
address, IP address, Zeroconf IP address and Firmware version.
5. Quick Setup Menu
5-1. Information
5-2. Users
5-2-1. Add
User accounts can be added or modified or removed. The authority depends upon user
group automatically and shows the permission status to access the menus.
Click the Add, Edit, or Delete button for managing user account.
• Name: Shows the name registered name to access the camera.
• Group: Shows the assigned permission given to users.
• Authority: Shows the permission status to access the menus.
To add a new user:
1. Click the Add tab, and type a new user name. (1 to 14 alphanumeric characters).
• User names are not case sensitive.
2. Type a password and retype confirm password. (1 to 8 alphanumeric characters).
• Passwords are case sensitive.
3. Select one of the groups you wish to assign to the user.
4. Click the OK button to save the settings and add a new user
Enter the setup menu icon on the Web Viewer.
Setting the Quick setup menu.
9
Virtuoso Quick Start Guide
5-3. Network
IP Address:
The DHCP (Dynamic Host Configuration Protocol) server has a feature that
automatically assigns an IP address to the device if there is a device on the
network.
5-2-3. Delete
To delete a user:
1. Select one of the User Names in the User List you want to remove.
2. Click the Delete tab. A dialog box appears with confirmation message.
3. Click the OK button. The user profile is removed from the User List profile.
5-2-2. Edit
To edit a user:
1. Select one of the User Names in the User List you want to modify.
2. Click the Edit tab, then new pop-up window appears.
3. Type a password (1 to 8 alphanumeric characters) and retype confirm password.
• The user name can’t be modified.
4. Select one of the groups you wish to assign to the user.
5. Click the OK button to save the settings and modify a user.
10 11
This manual suits for next models
1
Table of contents
Other Vitek IP Camera manuals
Vitek
Vitek VTC-TNB42R3F User manual
Vitek
Vitek VT-PIRC2T User manual
Vitek
Vitek VTC-IR303-212NP User manual
Vitek
Vitek VTD-MS2810DN User manual
Vitek
Vitek Transcendent Series User manual
Vitek
Vitek VTD-TND30R3V User manual
Vitek
Vitek Transcendent 5 Series User manual
Vitek
Vitek VTD-THD2RFE User manual
Vitek
Vitek Transcendent VT-TPTZ-B10X5N User manual
Vitek
Vitek Transcendent VTC-TNB8RFA3-2 User manual
