BLOTZ B20-ME-002 User manual
20mm Middle Eastern Building #2
B20-ME-002
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and
remember to cut away from yourself at all times.
During the construction of this model you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
Remove the two main walls and the front wall for the
larger structure from the sprue.
Fasten then together in an “H” shape as shown and
glue them to the base using the guidelines to help
position them.
Take the centre and rear walls of the main building..
.. and glue them into position.
Remove the final three walls
Attach these to form the smaller structure.
Remove the two doors and the roof supports.
The smaller structure uses the two short roof supports
and two of the longer supports. Also attach the
supports inside the main structure.
Glue the trapdoors to the roof sections and place (do
not glue) them on top of the roof supports.
Glue the gateway piece into place.
The finished building
Table of contents
Other BLOTZ Toy manuals
BLOTZ
BLOTZ B06-CS-100 User manual
BLOTZ
BLOTZ B20-MD-019 User manual
BLOTZ
BLOTZ B15-CS-251 User manual
BLOTZ
BLOTZ B06-CS-003 User manual
BLOTZ
BLOTZ B28-OW-113 User manual
BLOTZ
BLOTZ B28-ST-127 User manual
BLOTZ
BLOTZ B10-MW-108 User manual
BLOTZ
BLOTZ B15-PS-004 User manual
BLOTZ
BLOTZ B06-MW-101 User manual
BLOTZ
BLOTZ B10-CS-202 User manual
BLOTZ
BLOTZ B28-VSF-010 User manual
BLOTZ
BLOTZ B10-MW-110 User manual
BLOTZ
BLOTZ B10-ME-009 User manual
BLOTZ
BLOTZ B10-RD-103 User manual
BLOTZ
BLOTZ Middle Eastern Building 9 User manual
BLOTZ
BLOTZ B10-ME-010 User manual
BLOTZ
BLOTZ B10-MW-005 User manual
BLOTZ
BLOTZ B28-WW2-301 User manual
BLOTZ
BLOTZ B10-CS-208 User manual
BLOTZ
BLOTZ B06-CS-006 User manual
