BLOTZ B06-CS-006 User manual
6mm Car park
B06-CS-006
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember
to cut away from yourself at all times.
During the construction of this model you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
Take the base floor and four walls (as shown above)
from the sprue.
Glue the walls to the base as shown using the
lugs/holes provided to align the sections.
Remove each set of “leg” pieces (pair on the left) from
the sprue and glue them together to form the piece on
the right.
Glue the legs to the underside of the upper storey’s
floor (as shown).
Each end of the supper storey is formed from the
pieces shown.
Glue the inner piece into place.
Then add the small wall and ramp.
Then the outer wall.
Glue the two long side walls into place.
Stack the pieces to form the finished Car Park.
Table of contents
Other BLOTZ Toy manuals
BLOTZ
BLOTZ 10mm Skyscraper Dice Tower User manual
BLOTZ
BLOTZ B15-MW-007 User manual
BLOTZ
BLOTZ B10-PS-004 User manual
BLOTZ
BLOTZ B06-CS-101 User manual
BLOTZ
BLOTZ B06-MW-100 User manual
BLOTZ
BLOTZ B06-CS-003 User manual
BLOTZ
BLOTZ B28-OW-108 User manual
BLOTZ
BLOTZ B28-ME-004 User manual
BLOTZ
BLOTZ B15-PS-004 User manual
BLOTZ
BLOTZ Old West Store #7 User manual
BLOTZ
BLOTZ B28-AF-102 User manual
BLOTZ
BLOTZ Old West Store 8 User manual
BLOTZ
BLOTZ B28-ME-009 User manual
BLOTZ
BLOTZ B28-SF-228 User manual
BLOTZ
BLOTZ B10-RD-104 User manual
BLOTZ
BLOTZ 28mm Old West Store 4 User manual
BLOTZ
BLOTZ B00-ACC-400 User manual
BLOTZ
BLOTZ B10-MW-114 User manual
BLOTZ
BLOTZ B10-MW-110 User manual
BLOTZ
BLOTZ B10-ME-010 User manual
