BLOTZ B06-MW-101 User manual

6mm 3x3 Residential Foyer

B06-MW-101

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Foyer (B06-MW-101)

Remove the two “C” shaped sections and the

four shop fronts from the sprue.

Glue the shop fronts to the “C” sections as shown

(etched detail facing outwards) using the lugs on the

top edge of the shop fronts. The lugs on the ends of

the shop fronts will slot together. Leave to allow glue

to dry.

Now remove the four outer sections from the

sprue. Note two of these pieces have 4 lug-holes

in them and two only have two-lug-holes in

them.

Once the inner section has dried turn it over and glue

the outer sections onto it as shown ensuring the outer

sections with the 4 lug-holes are glued to the 4 lugs on

the “C” sections.

Repeat for the other two outer sections.

Finally glue the decorative strips just above the

columns so they cover the lug-holes. Note – two

strips are the same length as the walls and two

overlap slightly to give a continuous band.

6mm 3x3 Residential Middle

B06-MW-151

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Mid-Section (B06-MW-151)

Remove the four walls and two bracers from the

sprue. Glue the bracers to the non-etched side

of two identical walls (checking the end lugs to

be sure they are the same) as shown in the

example above. Leave to dry.

Once the bracers are dry apply a little glue to the side

lugs and glue the other walls in place as shown above.

You should now have a hollow square structure.

Leave it to dry.

Finally glue the decorative strips just above the

bottom windows so they cover the lug-holes.

Note – two strips are the same length as the

walls and two overlap slightly to give a

continuous band.

6mm 3x3 Residential Roof

B06-MW-201

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Roof Section (B06-MW-201)

Remove the four walls and roof from the sprue.

Apply glue to the edges of the roof and attach

the walls to it using the lugs provided (etched

detail outwards).

Now remove the four rectangles from the sprue.

Each of these has a line etched across it. Apply glue to

one side of the line only and attach it (as shown in the

example above) to the centre ottom edge of each

wall.

Finally glue the decorative strips at the top of

each wall so they cover the lug-holes. Note –

two strips are the same length as the walls and

two overlap slightly to give a continuous band.

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions